/*
** The "printf" code that follows dates from the 1980's. It is in
** the public domain. The original comments are included here for
** completeness. They are very out-of-date but might be useful as
** an historical reference. Most of the "enhancements" have been backed
** out so that the functionality is now the same as standard printf().
**
**************************************************************************
**
** The following modules is an enhanced replacement for the "printf" subroutines
** found in the standard C library. The following enhancements are
** supported:
**
** + Additional functions. The standard set of "printf" functions
** includes printf, fprintf, sprintf, vprintf, vfprintf, and
** vsprintf. This module adds the following:
**
** * snprintf -- Works like sprintf, but has an extra argument
** which is the size of the buffer written to.
**
** * mprintf -- Similar to sprintf. Writes output to memory
** obtained from malloc.
**
** * xprintf -- Calls a function to dispose of output.
**
** * nprintf -- No output, but returns the number of characters
** that would have been output by printf.
**
** * A v- version (ex: vsnprintf) of every function is also
** supplied.
**
** + A few extensions to the formatting notation are supported:
**
** * The "=" flag (similar to "-") causes the output to be
** be centered in the appropriately sized field.
**
** * The %b field outputs an integer in binary notation.
**
** * The %c field now accepts a precision. The character output
** is repeated by the number of times the precision specifies.
**
** * The %' field works like %c, but takes as its character the
** next character of the format string, instead of the next
** argument. For example, printf("%.78'-") prints 78 minus
** signs, the same as printf("%.78c",'-').
**
** + When compiled using GCC on a SPARC, this version of printf is
** faster than the library printf for SUN OS 4.1.
**
** + All functions are fully reentrant.
**
*/
#include "sqliteInt.h"
/*
** Conversion types fall into various categories as defined by the
** following enumeration.
*/
#define etRADIX 1 /* Integer types. %d, %x, %o, and so forth */
#define etFLOAT 2 /* Floating point. %f */
#define etEXP 3 /* Exponentional notation. %e and %E */
#define etGENERIC 4 /* Floating or exponential, depending on exponent. %g */
#define etSIZE 5 /* Return number of characters processed so far. %n */
#define etSTRING 6 /* Strings. %s */
#define etDYNSTRING 7 /* Dynamically allocated strings. %z */
#define etPERCENT 8 /* Percent symbol. %% */
#define etCHARX 9 /* Characters. %c */
/* The rest are extensions, not normally found in printf() */
#define etSQLESCAPE 10 /* Strings with '\'' doubled. %q */
#define etSQLESCAPE2 11 /* Strings with '\'' doubled and enclosed in '',
NULL pointers replaced by SQL NULL. %Q */
#define etTOKEN 12 /* a pointer to a Token structure */
#define etSRCLIST 13 /* a pointer to a SrcList */
#define etPOINTER 14 /* The %p conversion */
#define etSQLESCAPE3 15 /* %w -> Strings with '\"' doubled */
#define etORDINAL 16 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
#define etINVALID 0 /* Any unrecognized conversion type */
/*
** An "etByte" is an 8-bit unsigned value.
*/
typedef unsigned char etByte;
/*
** Each builtin conversion character (ex: the 'd' in "%d") is described
** by an instance of the following structure
*/
typedef struct et_info { /* Information about each format field */
char fmttype; /* The format field code letter */
etByte base; /* The base for radix conversion */
etByte flags; /* One or more of FLAG_ constants below */
etByte type; /* Conversion paradigm */
etByte charset; /* Offset into aDigits[] of the digits string */
etByte prefix; /* Offset into aPrefix[] of the prefix string */
} et_info;
/*
** Allowed values for et_info.flags
*/
#define FLAG_SIGNED 1 /* True if the value to convert is signed */
#define FLAG_INTERN 2 /* True if for internal use only */
#define FLAG_STRING 4 /* Allow infinity precision */
/*
** The following table is searched linearly, so it is good to put the
** most frequently used conversion types first.
*/
static const char aDigits[] = "0123456789ABCDEF0123456789abcdef";
static const char aPrefix[] = "-x0\000X0";
static const et_info fmtinfo[] = {
{ 'd', 10, 1, etRADIX, 0, 0 },
{ 's', 0, 4, etSTRING, 0, 0 },
{ 'g', 0, 1, etGENERIC, 30, 0 },
{ 'z', 0, 4, etDYNSTRING, 0, 0 },
{ 'q', 0, 4, etSQLESCAPE, 0, 0 },
{ 'Q', 0, 4, etSQLESCAPE2, 0, 0 },
{ 'w', 0, 4, etSQLESCAPE3, 0, 0 },
{ 'c', 0, 0, etCHARX, 0, 0 },
{ 'o', 8, 0, etRADIX, 0, 2 },
{ 'u', 10, 0, etRADIX, 0, 0 },
{ 'x', 16, 0, etRADIX, 16, 1 },
{ 'X', 16, 0, etRADIX, 0, 4 },
#ifndef SQLITE_OMIT_FLOATING_POINT
{ 'f', 0, 1, etFLOAT, 0, 0 },
{ 'e', 0, 1, etEXP, 30, 0 },
{ 'E', 0, 1, etEXP, 14, 0 },
{ 'G', 0, 1, etGENERIC, 14, 0 },
#endif
{ 'i', 10, 1, etRADIX, 0, 0 },
{ 'n', 0, 0, etSIZE, 0, 0 },
{ '%', 0, 0, etPERCENT, 0, 0 },
{ 'p', 16, 0, etPOINTER, 0, 1 },
/* All the rest have the FLAG_INTERN bit set and are thus for internal
** use only */
{ 'T', 0, 2, etTOKEN, 0, 0 },
{ 'S', 0, 2, etSRCLIST, 0, 0 },
{ 'r', 10, 3, etORDINAL, 0, 0 },
};
/*
** If SQLITE_OMIT_FLOATING_POINT is defined, then none of the floating point
** conversions will work.
*/
#ifndef SQLITE_OMIT_FLOATING_POINT
/*
** "*val" is a double such that 0.1 <= *val < 10.0
** Return the ascii code for the leading digit of *val, then
** multiply "*val" by 10.0 to renormalize.
**
** Example:
** input: *val = 3.14159
** output: *val = 1.4159 function return = '3'
**
** The counter *cnt is incremented each time. After counter exceeds
** 16 (the number of significant digits in a 64-bit float) '0' is
** always returned.
*/
static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){
int digit;
LONGDOUBLE_TYPE d;
if( (*cnt)++ >= 16 ) return '0';
digit = (int)*val;
d = digit;
digit += '0';
*val = (*val - d)*10.0;
return (char)digit;
}
#endif /* SQLITE_OMIT_FLOATING_POINT */
/*
** Append N space characters to the given string buffer.
*/
static void appendSpace(StrAccum *pAccum, int N){
static const char zSpaces[] = " ";
while( N>=(int)sizeof(zSpaces)-1 ){
sqlite3StrAccumAppend(pAccum, zSpaces, sizeof(zSpaces)-1);
N -= sizeof(zSpaces)-1;
}
if( N>0 ){
sqlite3StrAccumAppend(pAccum, zSpaces, N);
}
}
/*
** On machines with a small stack size, you can redefine the
** SQLITE_PRINT_BUF_SIZE to be less than 350.
*/
#ifndef SQLITE_PRINT_BUF_SIZE
# if defined(SQLITE_SMALL_STACK)
# define SQLITE_PRINT_BUF_SIZE 50
# else
# define SQLITE_PRINT_BUF_SIZE 350
# endif
#endif
#define etBUFSIZE SQLITE_PRINT_BUF_SIZE /* Size of the output buffer */
/*
** The root program. All variations call this core.
**
** INPUTS:
** func This is a pointer to a function taking three arguments
** 1. A pointer to anything. Same as the "arg" parameter.
** 2. A pointer to the list of characters to be output
** (Note, this list is NOT null terminated.)
** 3. An integer number of characters to be output.
** (Note: This number might be zero.)
**
** arg This is the pointer to anything which will be passed as the
** first argument to "func". Use it for whatever you like.
**
** fmt This is the format string, as in the usual print.
**
** ap This is a pointer to a list of arguments. Same as in
** vfprint.
**
** OUTPUTS:
** The return value is the total number of characters sent to
** the function "func". Returns -1 on a error.
**
** Note that the order in which automatic variables are declared below
** seems to make a big difference in determining how fast this beast
** will run.
*/
void sqlite3VXPrintf(
StrAccum *pAccum, /* Accumulate results here */
int useExtended, /* Allow extended %-conversions */
const char *fmt, /* Format string */
va_list ap /* arguments */
){
int c; /* Next character in the format string */
char *bufpt; /* Pointer to the conversion buffer */
int precision; /* Precision of the current field */
int length; /* Length of the field */
int idx; /* A general purpose loop counter */
int width; /* Width of the current field */
etByte flag_leftjustify; /* True if "-" flag is present */
etByte flag_plussign; /* True if "+" flag is present */
etByte flag_blanksign; /* True if " " flag is present */
etByte flag_alternateform; /* True if "#" flag is present */
etByte flag_altform2; /* True if "!" flag is present */
etByte flag_zeropad; /* True if field width constant starts with zero */
etByte flag_long; /* True if "l" flag is present */
etByte flag_longlong; /* True if the "ll" flag is present */
etByte done; /* Loop termination flag */
sqlite_uint64 longvalue; /* Value for integer types */
LONGDOUBLE_TYPE realvalue; /* Value for real types */
const et_info *infop; /* Pointer to the appropriate info structure */
char buf[etBUFSIZE]; /* Conversion buffer */
char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */
etByte xtype = 0; /* Conversion paradigm */
char *zExtra; /* Extra memory used for etTCLESCAPE conversions */
#ifndef SQLITE_OMIT_FLOATING_POINT
int exp, e2; /* exponent of real numbers */
double rounder; /* Used for rounding floating point values */
etByte flag_dp; /* True if decimal point should be shown */
etByte flag_rtz; /* True if trailing zeros should be removed */
etByte flag_exp; /* True to force display of the exponent */
int nsd; /* Number of significant digits returned */
#endif
length = 0;
bufpt = 0;
for(; (c=(*fmt))!=0; ++fmt){
if( c!='%' ){
int amt;
bufpt = (char *)fmt;
amt = 1;
while( (c=(*++fmt))!='%' && c!=0 ) amt++;
sqlite3StrAccumAppend(pAccum, bufpt, amt);
if( c==0 ) break;
}
if( (c=(*++fmt))==0 ){
sqlite3StrAccumAppend(pAccum, "%", 1);
break;
}
/* Find out what flags are present */
flag_leftjustify = flag_plussign = flag_blanksign =
flag_alternateform = flag_altform2 = flag_zeropad = 0;
done = 0;
do{
switch( c ){
case '-': flag_leftjustify = 1; break;
case '+': flag_plussign = 1; break;
case ' ': flag_blanksign = 1; break;
case '#': flag_alternateform = 1; break;
case '!': flag_altform2 = 1; break;
case '0': flag_zeropad = 1; break;
default: done = 1; break;
}
}while( !done && (c=(*++fmt))!=0 );
/* Get the field width */
width = 0;
if( c=='*' ){
width = va_arg(ap,int);
if( width<0 ){
flag_leftjustify = 1;
width = -width;
}
c = *++fmt;
}else{
while( c>='0' && c<='9' ){
width = width*10 + c - '0';
c = *++fmt;
}
}
if( width > etBUFSIZE-10 ){
width = etBUFSIZE-10;
}
/* Get the precision */
if( c=='.' ){
precision = 0;
c = *++fmt;
if( c=='*' ){
precision = va_arg(ap,int);
if( precision<0 ) precision = -precision;
c = *++fmt;
}else{
while( c>='0' && c<='9' ){
precision = precision*10 + c - '0';
c = *++fmt;
}
}
}else{
precision = -1;
}
/* Get the conversion type modifier */
if( c=='l' ){
flag_long = 1;
c = *++fmt;
if( c=='l' ){
flag_longlong = 1;
c = *++fmt;
}else{
flag_longlong = 0;
}
}else{
flag_long = flag_longlong = 0;
}
/* Fetch the info entry for the field */
infop = &fmtinfo[0];
xtype = etINVALID;
for(idx=0; idx<ArraySize(fmtinfo); idx++){
if( c==fmtinfo[idx].fmttype ){
infop = &fmtinfo[idx];
if( useExtended || (infop->flags & FLAG_INTERN)==0 ){
xtype = infop->type;
}else{
return;
}
break;
}
}
zExtra = 0;
/* Limit the precision to prevent overflowing buf[] during conversion */
if( precision>etBUFSIZE-40 && (infop->flags & FLAG_STRING)==0 ){
precision = etBUFSIZE-40;
}
/*
** At this point, variables are initialized as follows:
**
** flag_alternateform TRUE if a '#' is present.
** flag_altform2 TRUE if a '!' is present.
** flag_plussign TRUE if a '+' is present.
** flag_leftjustify TRUE if a '-' is present or if the
** field width was negative.
** flag_zeropad TRUE if the width began with 0.
** flag_long TRUE if the letter 'l' (ell) prefixed
** the conversion character.
** flag_longlong TRUE if the letter 'll' (ell ell) prefixed
** the conversion character.
** flag_blanksign TRUE if a ' ' is present.
** width The specified field width. This is
** always non-negative. Zero is the default.
** precision The specified precision. The default
** is -1.
** xtype The class of the conversion.
** infop Pointer to the appropriate info struct.
*/
switch( xtype ){
case etPOINTER:
flag_longlong = sizeof(char*)==sizeof(i64);
flag_long = sizeof(char*)==sizeof(long int);
/* Fall through into the next case */
case etORDINAL:
case etRADIX:
if( infop->flags & FLAG_SIGNED ){
i64 v;
if( flag_longlong ){
v = va_arg(ap,i64);
}else if( flag_long ){
v = va_arg(ap,long int);
}else{
v = va_arg(ap,int);
}
if( v<0 ){
if( v==SMALLEST_INT64 ){
longvalue = ((u64)1)<<63;
}else{
longvalue = -v;
}
prefix = '-';
}else{
longvalue = v;
if( flag_plussign ) prefix = '+';
else if( flag_blanksign ) prefix = ' ';
else prefix = 0;
}
}else{
if( flag_longlong ){
longvalue = va_arg(ap,u64);
}else if( flag_long ){
longvalue = va_arg(ap,unsigned long int);
}else{
longvalue = va_arg(ap,unsigned int);
}
prefix = 0;
}
if( longvalue==0 ) flag_alternateform = 0;
if( flag_zeropad && precision<width-(prefix!=0) ){
precision = width-(prefix!=0);
}
bufpt = &buf[etBUFSIZE-1];
if( xtype==etORDINAL ){
static const char zOrd[] = "thstndrd";
int x = (int)(longvalue % 10);
if( x>=4 || (longvalue/10)%10==1 ){
x = 0;
}
buf[etBUFSIZE-3] = zOrd[x*2];
buf[etBUFSIZE-2] = zOrd[x*2+1];
bufpt -= 2;
}
{
register const char *cset; /* Use registers for speed */
register int base;
cset = &aDigits[infop->charset];
base = infop->base;
do{ /* Convert to ascii */
*(--bufpt) = cset[longvalue%base];
longvalue = longvalue/base;
}while( longvalue>0 );
}
length = (int)(&buf[etBUFSIZE-1]-bufpt);
for(idx=precision-length; idx>0; idx--){
*(--bufpt) = '0'; /* Zero pad */
}
if( prefix ) *(--bufpt) = prefix; /* Add sign */
if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */
const char *pre;
char x;
pre = &aPrefix[infop->prefix];
for(; (x=(*pre))!=0; pre++) *(--bufpt) = x;
}
length = (int)(&buf[etBUFSIZE-1]-bufpt);
break;
case etFLOAT:
case etEXP:
case etGENERIC:
realvalue = va_arg(ap,double);
#ifdef SQLITE_OMIT_FLOATING_POINT
length = 0;
#else
if( precision<0 ) precision = 6; /* Set default precision */
if( precision>etBUFSIZE/2-10 ) precision = etBUFSIZE/2-10;
if( realvalue<0.0 ){
realvalue = -realvalue;
prefix = '-';
}else{
if( flag_plussign ) prefix = '+';
else if( flag_blanksign ) prefix = ' ';
else prefix = 0;
}
if( xtype==etGENERIC && precision>0 ) precision--;
#if 0
/* Rounding works like BSD when the constant 0.4999 is used. Wierd! */
for(idx=precision, rounder=0.4999; idx>0; idx--, rounder*=0.1);
#else
/* It makes more sense to use 0.5 */
for(idx=precision, rounder=0.5; idx>0; idx--, rounder*=0.1){}
#endif
if( xtype==etFLOAT ) realvalue += rounder;
/* Normalize realvalue to within 10.0 > realvalue >= 1.0 */
exp = 0;
if( sqlite3IsNaN((double)realvalue) ){
bufpt = "NaN";
length = 3;
break;
}
if( realvalue>0.0 ){
while( realvalue>=1e32 && exp<=350 ){ realvalue *= 1e-32; exp+=32; }
while( realvalue>=1e8 && exp<=350 ){ realvalue *= 1e-8; exp+=8; }
while( realvalue>=10.0 && exp<=350 ){ realvalue *= 0.1; exp++; }
while( realvalue<1e-8 ){ realvalue *= 1e8; exp-=8; }
while( realvalue<1.0 ){ realvalue *= 10.0; exp--; }
if( exp>350 ){
if( prefix=='-' ){
bufpt = "-Inf";
}else if( prefix=='+' ){
bufpt = "+Inf";
}else{
bufpt = "Inf";
}
length = sqlite3Strlen30(bufpt);
break;
}
}
bufpt = buf;
/*
** If the field type is etGENERIC, then convert to either etEXP
** or etFLOAT, as appropriate.
*/
flag_exp = xtype==etEXP;
if( xtype!=etFLOAT ){
realvalue += rounder;
if( realvalue>=10.0 ){ realvalue *= 0.1; exp++; }
}
if( xtype==etGENERIC ){
flag_rtz = !flag_alternateform;
if( exp<-4 || exp>precision ){
xtype = etEXP;
}else{
precision = precision - exp;
xtype = etFLOAT;
}
}else{
flag_rtz = 0;
}
if( xtype==etEXP ){
e2 = 0;
}else{
e2 = exp;
}
nsd = 0;
flag_dp = (precision>0 ?1:0) | flag_alternateform | flag_altform2;
/* The sign in front of the number */
if( prefix ){
*(bufpt++) = prefix;
}
/* Digits prior to the decimal point */
if( e2<0 ){
*(bufpt++) = '0';
}else{
for(; e2>=0; e2--){
*(bufpt++) = et_getdigit(&realvalue,&nsd);
}
}
/* The decimal point */
if( flag_dp ){
*(bufpt++) = '.';
}
/* "0" digits after the decimal point but before the first
** significant digit of the number */
for(e2++; e2<0; precision--, e2++){
assert( precision>0 );
*(bufpt++) = '0';
}
/* Significant digits after the decimal point */
while( (precision--)>0 ){
*(bufpt++) = et_getdigit(&realvalue,&nsd);
}
/* Remove trailing zeros and the "." if no digits follow the "." */
if( flag_rtz && flag_dp ){
while( bufpt[-1]=='0' ) *(--bufpt) = 0;
assert( bufpt>buf );
if( bufpt[-1]=='.' ){
if( flag_altform2 ){
*(bufpt++) = '0';
}else{
*(--bufpt) = 0;
}
}
}
/* Add the "eNNN" suffix */
if( flag_exp || xtype==etEXP ){
*(bufpt++) = aDigits[infop->charset];
if( exp<0 ){
*(bufpt++) = '-'; exp = -exp;
}else{
*(bufpt++) = '+';
}
if( exp>=100 ){
*(bufpt++) = (char)((exp/100)+'0'); /* 100's digit */
exp %= 100;
}
*(bufpt++) = (char)(exp/10+'0'); /* 10's digit */
*(bufpt++) = (char)(exp%10+'0'); /* 1's digit */
}
*bufpt = 0;
/* The converted number is in buf[] and zero terminated. Output it.
** Note that the number is in the usual order, not reversed as with
** integer conversions. */
length = (int)(bufpt-buf);
bufpt = buf;
/* Special case: Add leading zeros if the flag_zeropad flag is
** set and we are not left justified */
if( flag_zeropad && !flag_leftjustify && length < width){
int i;
int nPad = width - length;
for(i=width; i>=nPad; i--){
bufpt[i] = bufpt[i-nPad];
}
i = prefix!=0;
while( nPad-- ) bufpt[i++] = '0';
length = width;
}
#endif /* !defined(SQLITE_OMIT_FLOATING_POINT) */
break;
case etSIZE:
*(va_arg(ap,int*)) = pAccum->nChar;
length = width = 0;
break;
case etPERCENT:
buf[0] = '%';
bufpt = buf;
length = 1;
break;
case etCHARX:
c = va_arg(ap,int);
buf[0] = (char)c;
if( precision>=0 ){
for(idx=1; idx<precision; idx++) buf[idx] = (char)c;
length = precision;
}else{
length =1;
}
bufpt = buf;
break;
case etSTRING:
case etDYNSTRING:
bufpt = va_arg(ap,char*);
if( bufpt==0 ){
bufpt = "";
}else if( xtype==etDYNSTRING ){
zExtra = bufpt;
}
if( precision>=0 ){
for(length=0; length<precision && bufpt[length]; length++){}
}else{
length = sqlite3Strlen30(bufpt);
}
break;
case etSQLESCAPE:
case etSQLESCAPE2:
case etSQLESCAPE3: {
int i, j, k, n, isnull;
int needQuote;
char ch;
char q = ((xtype==etSQLESCAPE3)?'"':'\''); /* Quote character */
char *escarg = va_arg(ap,char*);
isnull = escarg==0;
if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)");
k = precision;
for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){
if( ch==q ) n++;
}
needQuote = !isnull && xtype==etSQLESCAPE2;
n += i + 1 + needQuote*2;
if( n>etBUFSIZE ){
bufpt = zExtra = sqlite3Malloc( n );
if( bufpt==0 ){
pAccum->mallocFailed = 1;
return;
}
}else{
bufpt = buf;
}
j = 0;
if( needQuote ) bufpt[j++] = q;
k = i;
for(i=0; i<k; i++){
bufpt[j++] = ch = escarg[i];
if( ch==q ) bufpt[j++] = ch;
}
if( needQuote ) bufpt[j++] = q;
bufpt[j] = 0;
length = j;
/* The precision in %q and %Q means how many input characters to
** consume, not the length of the output...
** if( precision>=0 && precision<length ) length = precision; */
break;
}
case etTOKEN: {
Token *pToken = va_arg(ap, Token*);
if( pToken ){
sqlite3StrAccumAppend(pAccum, (const char*)pToken->z, pToken->n);
}
length = width = 0;
break;
}
case etSRCLIST: {
SrcList *pSrc = va_arg(ap, SrcList*);
int k = va_arg(ap, int);
struct SrcList_item *pItem = &pSrc->a[k];
assert( k>=0 && k<pSrc->nSrc );
if( pItem->zDatabase ){
sqlite3StrAccumAppend(pAccum, pItem->zDatabase, -1);
sqlite3StrAccumAppend(pAccum, ".", 1);
}
sqlite3StrAccumAppend(pAccum, pItem->zName, -1);
length = width = 0;
break;
}
default: {
assert( xtype==etINVALID );
return;
}
}/* End switch over the format type */
/*
** The text of the conversion is pointed to by "bufpt" and is
** "length" characters long. The field width is "width". Do
** the output.
*/
if( !flag_leftjustify ){
register int nspace;
nspace = width-length;
if( nspace>0 ){
appendSpace(pAccum, nspace);
}
}
if( length>0 ){
sqlite3StrAccumAppend(pAccum, bufpt, length);
}
if( flag_leftjustify ){
register int nspace;
nspace = width-length;
if( nspace>0 ){
appendSpace(pAccum, nspace);
}
}
if( zExtra ){
sqlite3_free(zExtra);
}
}/* End for loop over the format string */
} /* End of function */
/*
** Append N bytes of text from z to the StrAccum object.
*/
void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){
assert( z!=0 || N==0 );
if( p->tooBig | p->mallocFailed ){
testcase(p->tooBig);
testcase(p->mallocFailed);
return;
}
if( N<0 ){
N = sqlite3Strlen30(z);
}
if( N==0 || NEVER(z==0) ){
return;
}
if( p->nChar+N >= p->nAlloc ){
char *zNew;
if( !p->useMalloc ){
p->tooBig = 1;
N = p->nAlloc - p->nChar - 1;
if( N<=0 ){
return;
}
}else{
char *zOld = (p->zText==p->zBase ? 0 : p->zText);
i64 szNew = p->nChar;
szNew += N + 1;
if( szNew > p->mxAlloc ){
sqlite3StrAccumReset(p);
p->tooBig = 1;
return;
}else{
p->nAlloc = (int)szNew;
}
if( p->useMalloc==1 ){
zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc);
}else{
zNew = sqlite3_realloc(zOld, p->nAlloc);
}
if( zNew ){
if( zOld==0 ) memcpy(zNew, p->zText, p->nChar);
p->zText = zNew;
}else{
p->mallocFailed = 1;
sqlite3StrAccumReset(p);
return;
}
}
}
memcpy(&p->zText[p->nChar], z, N);
p->nChar += N;
}
/*
** Finish off a string by making sure it is zero-terminated.
** Return a pointer to the resulting string. Return a NULL
** pointer if any kind of error was encountered.
*/
char *sqlite3StrAccumFinish(StrAccum *p){
if( p->zText ){
p->zText[p->nChar] = 0;
if( p->useMalloc && p->zText==p->zBase ){
if( p->useMalloc==1 ){
p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 );
}else{
p->zText = sqlite3_malloc(p->nChar+1);
}
if( p->zText ){
memcpy(p->zText, p->zBase, p->nChar+1);
}else{
p->mallocFailed = 1;
}
}
}
return p->zText;
}
/*
** Reset an StrAccum string. Reclaim all malloced memory.
*/
void sqlite3StrAccumReset(StrAccum *p){
if( p->zText!=p->zBase ){
if( p->useMalloc==1 ){
sqlite3DbFree(p->db, p->zText);
}else{
sqlite3_free(p->zText);
}
}
p->zText = 0;
}
/*
** Initialize a string accumulator
*/
void sqlite3StrAccumInit(StrAccum *p, char *zBase, int n, int mx){
p->zText = p->zBase = zBase;
p->db = 0;
p->nChar = 0;
p->nAlloc = n;
p->mxAlloc = mx;
p->useMalloc = 1;
p->tooBig = 0;
p->mallocFailed = 0;
}
/*
** Print into memory obtained from sqliteMalloc(). Use the internal
** %-conversion extensions.
*/
char *sqlite3VMPrintf(sqlite3 *db, const char *zFormat, va_list ap){
char *z;
char zBase[SQLITE_PRINT_BUF_SIZE];
StrAccum acc;
assert( db!=0 );
sqlite3StrAccumInit(&acc, zBase, sizeof(zBase),
db->aLimit[SQLITE_LIMIT_LENGTH]);
acc.db = db;
sqlite3VXPrintf(&acc, 1, zFormat, ap);
z = sqlite3StrAccumFinish(&acc);
if( acc.mallocFailed ){
db->mallocFailed = 1;
}
return z;
}
/*
** Print into memory obtained from sqliteMalloc(). Use the internal
** %-conversion extensions.
*/
char *sqlite3MPrintf(sqlite3 *db, const char *zFormat, ...){
va_list ap;
char *z;
va_start(ap, zFormat);
z = sqlite3VMPrintf(db, zFormat, ap);
va_end(ap);
return z;
}
/*
** Like sqlite3MPrintf(), but call sqlite3DbFree() on zStr after formatting
** the string and before returnning. This routine is intended to be used
** to modify an existing string. For example:
**
** x = sqlite3MPrintf(db, x, "prefix %s suffix", x);
**
*/
char *sqlite3MAppendf(sqlite3 *db, char *zStr, const char *zFormat, ...){
va_list ap;
char *z;
va_start(ap, zFormat);
z = sqlite3VMPrintf(db, zFormat, ap);
va_end(ap);
sqlite3DbFree(db, zStr);
return z;
}
/*
** Print into memory obtained from sqlite3_malloc(). Omit the internal
** %-conversion extensions.
*/
char *sqlite3_vmprintf(const char *zFormat, va_list ap){
char *z;
char zBase[SQLITE_PRINT_BUF_SIZE];
StrAccum acc;
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
sqlite3StrAccumInit(&acc, zBase, sizeof(zBase), SQLITE_MAX_LENGTH);
acc.useMalloc = 2;
sqlite3VXPrintf(&acc, 0, zFormat, ap);
z = sqlite3StrAccumFinish(&acc);
return z;
}
/*
** Print into memory obtained from sqlite3_malloc()(). Omit the internal
** %-conversion extensions.
*/
char *sqlite3_mprintf(const char *zFormat, ...){
va_list ap;
char *z;
#ifndef SQLITE_OMIT_AUTOINIT
if( sqlite3_initialize() ) return 0;
#endif
va_start(ap, zFormat);
z = sqlite3_vmprintf(zFormat, ap);
va_end(ap);
return z;
}
/*
** sqlite3_snprintf() works like snprintf() except that it ignores the
** current locale settings. This is important for SQLite because we
** are not able to use a "," as the decimal point in place of "." as
** specified by some locales.
**
** Oops: The first two arguments of sqlite3_snprintf() are backwards
** from the snprintf() standard. Unfortunately, it is too late to change
** this without breaking compatibility, so we just have to live with the
** mistake.
**
** sqlite3_vsnprintf() is the varargs version.
*/
char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
StrAccum acc;
if( n<=0 ) return zBuf;
sqlite3StrAccumInit(&acc, zBuf, n, 0);
acc.useMalloc = 0;
sqlite3VXPrintf(&acc, 0, zFormat, ap);
return sqlite3StrAccumFinish(&acc);
}
char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
char *z;
va_list ap;
va_start(ap,zFormat);
z = sqlite3_vsnprintf(n, zBuf, zFormat, ap);
va_end(ap);
return z;
}
/*
** This is the routine that actually formats the sqlite3_log() message.
** We house it in a separate routine from sqlite3_log() to avoid using
** stack space on small-stack systems when logging is disabled.
**
** sqlite3_log() must render into a static buffer. It cannot dynamically
** allocate memory because it might be called while the memory allocator
** mutex is held.
*/
static void renderLogMsg(int iErrCode, const char *zFormat, va_list ap){
StrAccum acc; /* String accumulator */
char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */
sqlite3StrAccumInit(&acc, zMsg, sizeof(zMsg), 0);
acc.useMalloc = 0;
sqlite3VXPrintf(&acc, 0, zFormat, ap);
sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode,
sqlite3StrAccumFinish(&acc));
}
/*
** Format and write a message to the log if logging is enabled.
*/
void sqlite3_log(int iErrCode, const char *zFormat, ...){
va_list ap; /* Vararg list */
if( sqlite3GlobalConfig.xLog ){
va_start(ap, zFormat);
renderLogMsg(iErrCode, zFormat, ap);
va_end(ap);
}
}
#if defined(SQLITE_DEBUG)
/*
** A version of printf() that understands %lld. Used for debugging.
** The printf() built into some versions of windows does not understand %lld
** and segfaults if you give it a long long int.
*/
void sqlite3DebugPrintf(const char *zFormat, ...){
va_list ap;
StrAccum acc;
char zBuf[500];
sqlite3StrAccumInit(&acc, zBuf, sizeof(zBuf), 0);
acc.useMalloc = 0;
va_start(ap,zFormat);
sqlite3VXPrintf(&acc, 0, zFormat, ap);
va_end(ap);
sqlite3StrAccumFinish(&acc);
fprintf(stdout,"%s", zBuf);
fflush(stdout);
}
#endif
#ifndef SQLITE_OMIT_TRACE
/*
** variable-argument wrapper around sqlite3VXPrintf().
*/
void sqlite3XPrintf(StrAccum *p, const char *zFormat, ...){
va_list ap;
va_start(ap,zFormat);
sqlite3VXPrintf(p, 1, zFormat, ap);
va_end(ap);
}
#endif