/*
* copyright (c) 2001 Fabrice Bellard
*
* This file is part of FFmpeg.
*
* FFmpeg is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* FFmpeg is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with FFmpeg; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef AVCODEC_AVCODEC_H
#define AVCODEC_AVCODEC_H
/**
* @file
* @ingroup libavc
* Libavcodec external API header
*/
#include <errno.h>
#include "libavutil/samplefmt.h"
#include "libavutil/attributes.h"
#include "libavutil/avutil.h"
#include "libavutil/buffer.h"
#include "libavutil/cpu.h"
#include "libavutil/channel_layout.h"
#include "libavutil/dict.h"
#include "libavutil/frame.h"
#include "libavutil/log.h"
#include "libavutil/pixfmt.h"
#include "libavutil/rational.h"
#include "version.h"
#if FF_API_FAST_MALLOC
// to provide fast_*alloc
#include "libavutil/mem.h"
#endif
/**
* @defgroup libavc Encoding/Decoding Library
* @{
*
* @defgroup lavc_decoding Decoding
* @{
* @}
*
* @defgroup lavc_encoding Encoding
* @{
* @}
*
* @defgroup lavc_codec Codecs
* @{
* @defgroup lavc_codec_native Native Codecs
* @{
* @}
* @defgroup lavc_codec_wrappers External library wrappers
* @{
* @}
* @defgroup lavc_codec_hwaccel Hardware Accelerators bridge
* @{
* @}
* @}
* @defgroup lavc_internal Internal
* @{
* @}
* @}
*
*/
/**
* @defgroup lavc_core Core functions/structures.
* @ingroup libavc
*
* Basic definitions, functions for querying libavcodec capabilities,
* allocating core structures, etc.
* @{
*/
/**
* Identify the syntax and semantics of the bitstream.
* The principle is roughly:
* Two decoders with the same ID can decode the same streams.
* Two encoders with the same ID can encode compatible streams.
* There may be slight deviations from the principle due to implementation
* details.
*
* If you add a codec ID to this list, add it so that
* 1. no value of a existing codec ID changes (that would break ABI),
* 2. Give it a value which when taken as ASCII is recognized uniquely by a human as this specific codec.
* This ensures that 2 forks can independently add AVCodecIDs without producing conflicts.
*
* After adding new codec IDs, do not forget to add an entry to the codec
* descriptor list and bump libavcodec minor version.
*/
enum AVCodecID {
AV_CODEC_ID_NONE,
/* video codecs */
AV_CODEC_ID_MPEG1VIDEO,
AV_CODEC_ID_MPEG2VIDEO, ///< preferred ID for MPEG-1/2 video decoding
#if FF_API_XVMC
AV_CODEC_ID_MPEG2VIDEO_XVMC,
#endif /* FF_API_XVMC */
AV_CODEC_ID_H261,
AV_CODEC_ID_H263,
AV_CODEC_ID_RV10,
AV_CODEC_ID_RV20,
AV_CODEC_ID_MJPEG,
AV_CODEC_ID_MJPEGB,
AV_CODEC_ID_LJPEG,
AV_CODEC_ID_SP5X,
AV_CODEC_ID_JPEGLS,
AV_CODEC_ID_MPEG4,
AV_CODEC_ID_RAWVIDEO,
AV_CODEC_ID_MSMPEG4V1,
AV_CODEC_ID_MSMPEG4V2,
AV_CODEC_ID_MSMPEG4V3,
AV_CODEC_ID_WMV1,
AV_CODEC_ID_WMV2,
AV_CODEC_ID_H263P,
AV_CODEC_ID_H263I,
AV_CODEC_ID_FLV1,
AV_CODEC_ID_SVQ1,
AV_CODEC_ID_SVQ3,
AV_CODEC_ID_DVVIDEO,
AV_CODEC_ID_HUFFYUV,
AV_CODEC_ID_CYUV,
AV_CODEC_ID_H264,
AV_CODEC_ID_INDEO3,
AV_CODEC_ID_VP3,
AV_CODEC_ID_THEORA,
AV_CODEC_ID_ASV1,
AV_CODEC_ID_ASV2,
AV_CODEC_ID_FFV1,
AV_CODEC_ID_4XM,
AV_CODEC_ID_VCR1,
AV_CODEC_ID_CLJR,
AV_CODEC_ID_MDEC,
AV_CODEC_ID_ROQ,
AV_CODEC_ID_INTERPLAY_VIDEO,
AV_CODEC_ID_XAN_WC3,
AV_CODEC_ID_XAN_WC4,
AV_CODEC_ID_RPZA,
AV_CODEC_ID_CINEPAK,
AV_CODEC_ID_WS_VQA,
AV_CODEC_ID_MSRLE,
AV_CODEC_ID_MSVIDEO1,
AV_CODEC_ID_IDCIN,
AV_CODEC_ID_8BPS,
AV_CODEC_ID_SMC,
AV_CODEC_ID_FLIC,
AV_CODEC_ID_TRUEMOTION1,
AV_CODEC_ID_VMDVIDEO,
AV_CODEC_ID_MSZH,
AV_CODEC_ID_ZLIB,
AV_CODEC_ID_QTRLE,
AV_CODEC_ID_TSCC,
AV_CODEC_ID_ULTI,
AV_CODEC_ID_QDRAW,
AV_CODEC_ID_VIXL,
AV_CODEC_ID_QPEG,
AV_CODEC_ID_PNG,
AV_CODEC_ID_PPM,
AV_CODEC_ID_PBM,
AV_CODEC_ID_PGM,
AV_CODEC_ID_PGMYUV,
AV_CODEC_ID_PAM,
AV_CODEC_ID_FFVHUFF,
AV_CODEC_ID_RV30,
AV_CODEC_ID_RV40,
AV_CODEC_ID_VC1,
AV_CODEC_ID_WMV3,
AV_CODEC_ID_LOCO,
AV_CODEC_ID_WNV1,
AV_CODEC_ID_AASC,
AV_CODEC_ID_INDEO2,
AV_CODEC_ID_FRAPS,
AV_CODEC_ID_TRUEMOTION2,
AV_CODEC_ID_BMP,
AV_CODEC_ID_CSCD,
AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_ZMBV,
AV_CODEC_ID_AVS,
AV_CODEC_ID_SMACKVIDEO,
AV_CODEC_ID_NUV,
AV_CODEC_ID_KMVC,
AV_CODEC_ID_FLASHSV,
AV_CODEC_ID_CAVS,
AV_CODEC_ID_JPEG2000,
AV_CODEC_ID_VMNC,
AV_CODEC_ID_VP5,
AV_CODEC_ID_VP6,
AV_CODEC_ID_VP6F,
AV_CODEC_ID_TARGA,
AV_CODEC_ID_DSICINVIDEO,
AV_CODEC_ID_TIERTEXSEQVIDEO,
AV_CODEC_ID_TIFF,
AV_CODEC_ID_GIF,
AV_CODEC_ID_DXA,
AV_CODEC_ID_DNXHD,
AV_CODEC_ID_THP,
AV_CODEC_ID_SGI,
AV_CODEC_ID_C93,
AV_CODEC_ID_BETHSOFTVID,
AV_CODEC_ID_PTX,
AV_CODEC_ID_TXD,
AV_CODEC_ID_VP6A,
AV_CODEC_ID_AMV,
AV_CODEC_ID_VB,
AV_CODEC_ID_PCX,
AV_CODEC_ID_SUNRAST,
AV_CODEC_ID_INDEO4,
AV_CODEC_ID_INDEO5,
AV_CODEC_ID_MIMIC,
AV_CODEC_ID_RL2,
AV_CODEC_ID_ESCAPE124,
AV_CODEC_ID_DIRAC,
AV_CODEC_ID_BFI,
AV_CODEC_ID_CMV,
AV_CODEC_ID_MOTIONPIXELS,
AV_CODEC_ID_TGV,
AV_CODEC_ID_TGQ,
AV_CODEC_ID_TQI,
AV_CODEC_ID_AURA,
AV_CODEC_ID_AURA2,
AV_CODEC_ID_V210X,
AV_CODEC_ID_TMV,
AV_CODEC_ID_V210,
AV_CODEC_ID_DPX,
AV_CODEC_ID_MAD,
AV_CODEC_ID_FRWU,
AV_CODEC_ID_FLASHSV2,
AV_CODEC_ID_CDGRAPHICS,
AV_CODEC_ID_R210,
AV_CODEC_ID_ANM,
AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_IFF_ILBM,
AV_CODEC_ID_IFF_BYTERUN1,
AV_CODEC_ID_KGV1,
AV_CODEC_ID_YOP,
AV_CODEC_ID_VP8,
AV_CODEC_ID_PICTOR,
AV_CODEC_ID_ANSI,
AV_CODEC_ID_A64_MULTI,
AV_CODEC_ID_A64_MULTI5,
AV_CODEC_ID_R10K,
AV_CODEC_ID_MXPEG,
AV_CODEC_ID_LAGARITH,
AV_CODEC_ID_PRORES,
AV_CODEC_ID_JV,
AV_CODEC_ID_DFA,
AV_CODEC_ID_WMV3IMAGE,
AV_CODEC_ID_VC1IMAGE,
AV_CODEC_ID_UTVIDEO,
AV_CODEC_ID_BMV_VIDEO,
AV_CODEC_ID_VBLE,
AV_CODEC_ID_DXTORY,
AV_CODEC_ID_V410,
AV_CODEC_ID_XWD,
AV_CODEC_ID_CDXL,
AV_CODEC_ID_XBM,
AV_CODEC_ID_ZEROCODEC,
AV_CODEC_ID_MSS1,
AV_CODEC_ID_MSA1,
AV_CODEC_ID_TSCC2,
AV_CODEC_ID_MTS2,
AV_CODEC_ID_CLLC,
AV_CODEC_ID_MSS2,
AV_CODEC_ID_VP9,
AV_CODEC_ID_AIC,
AV_CODEC_ID_ESCAPE130_DEPRECATED,
AV_CODEC_ID_G2M_DEPRECATED,
AV_CODEC_ID_WEBP_DEPRECATED,
AV_CODEC_ID_HNM4_VIDEO,
AV_CODEC_ID_HEVC_DEPRECATED,
AV_CODEC_ID_FIC,
AV_CODEC_ID_BRENDER_PIX= MKBETAG('B','P','I','X'),
AV_CODEC_ID_Y41P = MKBETAG('Y','4','1','P'),
AV_CODEC_ID_ESCAPE130 = MKBETAG('E','1','3','0'),
AV_CODEC_ID_EXR = MKBETAG('0','E','X','R'),
AV_CODEC_ID_AVRP = MKBETAG('A','V','R','P'),
AV_CODEC_ID_012V = MKBETAG('0','1','2','V'),
AV_CODEC_ID_G2M = MKBETAG( 0 ,'G','2','M'),
AV_CODEC_ID_AVUI = MKBETAG('A','V','U','I'),
AV_CODEC_ID_AYUV = MKBETAG('A','Y','U','V'),
AV_CODEC_ID_TARGA_Y216 = MKBETAG('T','2','1','6'),
AV_CODEC_ID_V308 = MKBETAG('V','3','0','8'),
AV_CODEC_ID_V408 = MKBETAG('V','4','0','8'),
AV_CODEC_ID_YUV4 = MKBETAG('Y','U','V','4'),
AV_CODEC_ID_SANM = MKBETAG('S','A','N','M'),
AV_CODEC_ID_PAF_VIDEO = MKBETAG('P','A','F','V'),
AV_CODEC_ID_AVRN = MKBETAG('A','V','R','n'),
AV_CODEC_ID_CPIA = MKBETAG('C','P','I','A'),
AV_CODEC_ID_XFACE = MKBETAG('X','F','A','C'),
AV_CODEC_ID_SGIRLE = MKBETAG('S','G','I','R'),
AV_CODEC_ID_MVC1 = MKBETAG('M','V','C','1'),
AV_CODEC_ID_MVC2 = MKBETAG('M','V','C','2'),
AV_CODEC_ID_SNOW = MKBETAG('S','N','O','W'),
AV_CODEC_ID_WEBP = MKBETAG('W','E','B','P'),
AV_CODEC_ID_SMVJPEG = MKBETAG('S','M','V','J'),
AV_CODEC_ID_HEVC = MKBETAG('H','2','6','5'),
#define AV_CODEC_ID_H265 AV_CODEC_ID_HEVC
/* various PCM "codecs" */
AV_CODEC_ID_FIRST_AUDIO = 0x10000, ///< A dummy id pointing at the start of audio codecs
AV_CODEC_ID_PCM_S16LE = 0x10000,
AV_CODEC_ID_PCM_S16BE,
AV_CODEC_ID_PCM_U16LE,
AV_CODEC_ID_PCM_U16BE,
AV_CODEC_ID_PCM_S8,
AV_CODEC_ID_PCM_U8,
AV_CODEC_ID_PCM_MULAW,
AV_CODEC_ID_PCM_ALAW,
AV_CODEC_ID_PCM_S32LE,
AV_CODEC_ID_PCM_S32BE,
AV_CODEC_ID_PCM_U32LE,
AV_CODEC_ID_PCM_U32BE,
AV_CODEC_ID_PCM_S24LE,
AV_CODEC_ID_PCM_S24BE,
AV_CODEC_ID_PCM_U24LE,
AV_CODEC_ID_PCM_U24BE,
AV_CODEC_ID_PCM_S24DAUD,
AV_CODEC_ID_PCM_ZORK,
AV_CODEC_ID_PCM_S16LE_PLANAR,
AV_CODEC_ID_PCM_DVD,
AV_CODEC_ID_PCM_F32BE,
AV_CODEC_ID_PCM_F32LE,
AV_CODEC_ID_PCM_F64BE,
AV_CODEC_ID_PCM_F64LE,
AV_CODEC_ID_PCM_BLURAY,
AV_CODEC_ID_PCM_LXF,
AV_CODEC_ID_S302M,
AV_CODEC_ID_PCM_S8_PLANAR,
AV_CODEC_ID_PCM_S24LE_PLANAR_DEPRECATED,
AV_CODEC_ID_PCM_S32LE_PLANAR_DEPRECATED,
AV_CODEC_ID_PCM_S24LE_PLANAR = MKBETAG(24,'P','S','P'),
AV_CODEC_ID_PCM_S32LE_PLANAR = MKBETAG(32,'P','S','P'),
AV_CODEC_ID_PCM_S16BE_PLANAR = MKBETAG('P','S','P',16),
/* various ADPCM codecs */
AV_CODEC_ID_ADPCM_IMA_QT = 0x11000,
AV_CODEC_ID_ADPCM_IMA_WAV,
AV_CODEC_ID_ADPCM_IMA_DK3,
AV_CODEC_ID_ADPCM_IMA_DK4,
AV_CODEC_ID_ADPCM_IMA_WS,
AV_CODEC_ID_ADPCM_IMA_SMJPEG,
AV_CODEC_ID_ADPCM_MS,
AV_CODEC_ID_ADPCM_4XM,
AV_CODEC_ID_ADPCM_XA,
AV_CODEC_ID_ADPCM_ADX,
AV_CODEC_ID_ADPCM_EA,
AV_CODEC_ID_ADPCM_G726,
AV_CODEC_ID_ADPCM_CT,
AV_CODEC_ID_ADPCM_SWF,
AV_CODEC_ID_ADPCM_YAMAHA,
AV_CODEC_ID_ADPCM_SBPRO_4,
AV_CODEC_ID_ADPCM_SBPRO_3,
AV_CODEC_ID_ADPCM_SBPRO_2,
AV_CODEC_ID_ADPCM_THP,
AV_CODEC_ID_ADPCM_IMA_AMV,
AV_CODEC_ID_ADPCM_EA_R1,
AV_CODEC_ID_ADPCM_EA_R3,
AV_CODEC_ID_ADPCM_EA_R2,
AV_CODEC_ID_ADPCM_IMA_EA_SEAD,
AV_CODEC_ID_ADPCM_IMA_EA_EACS,
AV_CODEC_ID_ADPCM_EA_XAS,
AV_CODEC_ID_ADPCM_EA_MAXIS_XA,
AV_CODEC_ID_ADPCM_IMA_ISS,
AV_CODEC_ID_ADPCM_G722,
AV_CODEC_ID_ADPCM_IMA_APC,
AV_CODEC_ID_VIMA = MKBETAG('V','I','M','A'),
AV_CODEC_ID_ADPCM_AFC = MKBETAG('A','F','C',' '),
AV_CODEC_ID_ADPCM_IMA_OKI = MKBETAG('O','K','I',' '),
AV_CODEC_ID_ADPCM_DTK = MKBETAG('D','T','K',' '),
AV_CODEC_ID_ADPCM_IMA_RAD = MKBETAG('R','A','D',' '),
AV_CODEC_ID_ADPCM_G726LE = MKBETAG('6','2','7','G'),
/* AMR */
AV_CODEC_ID_AMR_NB = 0x12000,
AV_CODEC_ID_AMR_WB,
/* RealAudio codecs*/
AV_CODEC_ID_RA_144 = 0x13000,
AV_CODEC_ID_RA_288,
/* various DPCM codecs */
AV_CODEC_ID_ROQ_DPCM = 0x14000,
AV_CODEC_ID_INTERPLAY_DPCM,
AV_CODEC_ID_XAN_DPCM,
AV_CODEC_ID_SOL_DPCM,
/* audio codecs */
AV_CODEC_ID_MP2 = 0x15000,
AV_CODEC_ID_MP3, ///< preferred ID for decoding MPEG audio layer 1, 2 or 3
AV_CODEC_ID_AAC,
AV_CODEC_ID_AC3,
AV_CODEC_ID_DTS,
AV_CODEC_ID_VORBIS,
AV_CODEC_ID_DVAUDIO,
AV_CODEC_ID_WMAV1,
AV_CODEC_ID_WMAV2,
AV_CODEC_ID_MACE3,
AV_CODEC_ID_MACE6,
AV_CODEC_ID_VMDAUDIO,
AV_CODEC_ID_FLAC,
AV_CODEC_ID_MP3ADU,
AV_CODEC_ID_MP3ON4,
AV_CODEC_ID_SHORTEN,
AV_CODEC_ID_ALAC,
AV_CODEC_ID_WESTWOOD_SND1,
AV_CODEC_ID_GSM, ///< as in Berlin toast format
AV_CODEC_ID_QDM2,
AV_CODEC_ID_COOK,
AV_CODEC_ID_TRUESPEECH,
AV_CODEC_ID_TTA,
AV_CODEC_ID_SMACKAUDIO,
AV_CODEC_ID_QCELP,
AV_CODEC_ID_WAVPACK,
AV_CODEC_ID_DSICINAUDIO,
AV_CODEC_ID_IMC,
AV_CODEC_ID_MUSEPACK7,
AV_CODEC_ID_MLP,
AV_CODEC_ID_GSM_MS, /* as found in WAV */
AV_CODEC_ID_ATRAC3,
#if FF_API_VOXWARE
AV_CODEC_ID_VOXWARE,
#endif
AV_CODEC_ID_APE,
AV_CODEC_ID_NELLYMOSER,
AV_CODEC_ID_MUSEPACK8,
AV_CODEC_ID_SPEEX,
AV_CODEC_ID_WMAVOICE,
AV_CODEC_ID_WMAPRO,
AV_CODEC_ID_WMALOSSLESS,
AV_CODEC_ID_ATRAC3P,
AV_CODEC_ID_EAC3,
AV_CODEC_ID_SIPR,
AV_CODEC_ID_MP1,
AV_CODEC_ID_TWINVQ,
AV_CODEC_ID_TRUEHD,
AV_CODEC_ID_MP4ALS,
AV_CODEC_ID_ATRAC1,
AV_CODEC_ID_BINKAUDIO_RDFT,
AV_CODEC_ID_BINKAUDIO_DCT,
AV_CODEC_ID_AAC_LATM,
AV_CODEC_ID_QDMC,
AV_CODEC_ID_CELT,
AV_CODEC_ID_G723_1,
AV_CODEC_ID_G729,
AV_CODEC_ID_8SVX_EXP,
AV_CODEC_ID_8SVX_FIB,
AV_CODEC_ID_BMV_AUDIO,
AV_CODEC_ID_RALF,
AV_CODEC_ID_IAC,
AV_CODEC_ID_ILBC,
AV_CODEC_ID_OPUS_DEPRECATED,
AV_CODEC_ID_COMFORT_NOISE,
AV_CODEC_ID_TAK_DEPRECATED,
AV_CODEC_ID_METASOUND,
AV_CODEC_ID_FFWAVESYNTH = MKBETAG('F','F','W','S'),
AV_CODEC_ID_SONIC = MKBETAG('S','O','N','C'),
AV_CODEC_ID_SONIC_LS = MKBETAG('S','O','N','L'),
AV_CODEC_ID_PAF_AUDIO = MKBETAG('P','A','F','A'),
AV_CODEC_ID_OPUS = MKBETAG('O','P','U','S'),
AV_CODEC_ID_TAK = MKBETAG('t','B','a','K'),
AV_CODEC_ID_EVRC = MKBETAG('s','e','v','c'),
AV_CODEC_ID_SMV = MKBETAG('s','s','m','v'),
/* subtitle codecs */
AV_CODEC_ID_FIRST_SUBTITLE = 0x17000, ///< A dummy ID pointing at the start of subtitle codecs.
AV_CODEC_ID_DVD_SUBTITLE = 0x17000,
AV_CODEC_ID_DVB_SUBTITLE,
AV_CODEC_ID_TEXT, ///< raw UTF-8 text
AV_CODEC_ID_XSUB,
AV_CODEC_ID_SSA,
AV_CODEC_ID_MOV_TEXT,
AV_CODEC_ID_HDMV_PGS_SUBTITLE,
AV_CODEC_ID_DVB_TELETEXT,
AV_CODEC_ID_SRT,
AV_CODEC_ID_MICRODVD = MKBETAG('m','D','V','D'),
AV_CODEC_ID_EIA_608 = MKBETAG('c','6','0','8'),
AV_CODEC_ID_JACOSUB = MKBETAG('J','S','U','B'),
AV_CODEC_ID_SAMI = MKBETAG('S','A','M','I'),
AV_CODEC_ID_REALTEXT = MKBETAG('R','T','X','T'),
AV_CODEC_ID_SUBVIEWER1 = MKBETAG('S','b','V','1'),
AV_CODEC_ID_SUBVIEWER = MKBETAG('S','u','b','V'),
AV_CODEC_ID_SUBRIP = MKBETAG('S','R','i','p'),
AV_CODEC_ID_WEBVTT = MKBETAG('W','V','T','T'),
AV_CODEC_ID_MPL2 = MKBETAG('M','P','L','2'),
AV_CODEC_ID_VPLAYER = MKBETAG('V','P','l','r'),
AV_CODEC_ID_PJS = MKBETAG('P','h','J','S'),
AV_CODEC_ID_ASS = MKBETAG('A','S','S',' '), ///< ASS as defined in Matroska
/* other specific kind of codecs (generally used for attachments) */
AV_CODEC_ID_FIRST_UNKNOWN = 0x18000, ///< A dummy ID pointing at the start of various fake codecs.
AV_CODEC_ID_TTF = 0x18000,
AV_CODEC_ID_BINTEXT = MKBETAG('B','T','X','T'),
AV_CODEC_ID_XBIN = MKBETAG('X','B','I','N'),
AV_CODEC_ID_IDF = MKBETAG( 0 ,'I','D','F'),
AV_CODEC_ID_OTF = MKBETAG( 0 ,'O','T','F'),
AV_CODEC_ID_SMPTE_KLV = MKBETAG('K','L','V','A'),
AV_CODEC_ID_DVD_NAV = MKBETAG('D','N','A','V'),
AV_CODEC_ID_TIMED_ID3 = MKBETAG('T','I','D','3'),
AV_CODEC_ID_PROBE = 0x19000, ///< codec_id is not known (like AV_CODEC_ID_NONE) but lavf should attempt to identify it
AV_CODEC_ID_MPEG2TS = 0x20000, /**< _FAKE_ codec to indicate a raw MPEG-2 TS
* stream (only used by libavformat) */
AV_CODEC_ID_MPEG4SYSTEMS = 0x20001, /**< _FAKE_ codec to indicate a MPEG-4 Systems
* stream (only used by libavformat) */
AV_CODEC_ID_FFMETADATA = 0x21000, ///< Dummy codec for streams containing only metadata information.
#if FF_API_CODEC_ID
#include "old_codec_ids.h"
#endif
};
/**
* This struct describes the properties of a single codec described by an
* AVCodecID.
* @see avcodec_get_descriptor()
*/
typedef struct AVCodecDescriptor {
enum AVCodecID id;
enum AVMediaType type;
/**
* Name of the codec described by this descriptor. It is non-empty and
* unique for each codec descriptor. It should contain alphanumeric
* characters and '_' only.
*/
const char *name;
/**
* A more descriptive name for this codec. May be NULL.
*/
const char *long_name;
/**
* Codec properties, a combination of AV_CODEC_PROP_* flags.
*/
int props;
} AVCodecDescriptor;
/**
* Codec uses only intra compression.
* Video codecs only.
*/
#define AV_CODEC_PROP_INTRA_ONLY (1 << 0)
/**
* Codec supports lossy compression. Audio and video codecs only.
* @note a codec may support both lossy and lossless
* compression modes
*/
#define AV_CODEC_PROP_LOSSY (1 << 1)
/**
* Codec supports lossless compression. Audio and video codecs only.
*/
#define AV_CODEC_PROP_LOSSLESS (1 << 2)
/**
* Subtitle codec is bitmap based
* Decoded AVSubtitle data can be read from the AVSubtitleRect->pict field.
*/
#define AV_CODEC_PROP_BITMAP_SUB (1 << 16)
/**
* Subtitle codec is text based.
* Decoded AVSubtitle data can be read from the AVSubtitleRect->ass field.
*/
#define AV_CODEC_PROP_TEXT_SUB (1 << 17)
/**
* @ingroup lavc_decoding
* Required number of additionally allocated bytes at the end of the input bitstream for decoding.
* This is mainly needed because some optimized bitstream readers read
* 32 or 64 bit at once and could read over the end.<br>
* Note: If the first 23 bits of the additional bytes are not 0, then damaged
* MPEG bitstreams could cause overread and segfault.
*/
#define FF_INPUT_BUFFER_PADDING_SIZE 16
/**
* @ingroup lavc_encoding
* minimum encoding buffer size
* Used to avoid some checks during header writing.
*/
#define FF_MIN_BUFFER_SIZE 16384
/**
* @ingroup lavc_encoding
* motion estimation type.
*/
enum Motion_Est_ID {
ME_ZERO = 1, ///< no search, that is use 0,0 vector whenever one is needed
ME_FULL,
ME_LOG,
ME_PHODS,
ME_EPZS, ///< enhanced predictive zonal search
ME_X1, ///< reserved for experiments
ME_HEX, ///< hexagon based search
ME_UMH, ///< uneven multi-hexagon search
ME_TESA, ///< transformed exhaustive search algorithm
ME_ITER=50, ///< iterative search
};
/**
* @ingroup lavc_decoding
*/
enum AVDiscard{
/* We leave some space between them for extensions (drop some
* keyframes for intra-only or drop just some bidir frames). */
AVDISCARD_NONE =-16, ///< discard nothing
AVDISCARD_DEFAULT = 0, ///< discard useless packets like 0 size packets in avi
AVDISCARD_NONREF = 8, ///< discard all non reference
AVDISCARD_BIDIR = 16, ///< discard all bidirectional frames
AVDISCARD_NONKEY = 32, ///< discard all frames except keyframes
AVDISCARD_ALL = 48, ///< discard all
};
enum AVColorPrimaries{
AVCOL_PRI_BT709 = 1, ///< also ITU-R BT1361 / IEC 61966-2-4 / SMPTE RP177 Annex B
AVCOL_PRI_UNSPECIFIED = 2,
AVCOL_PRI_BT470M = 4,
AVCOL_PRI_BT470BG = 5, ///< also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM
AVCOL_PRI_SMPTE170M = 6, ///< also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC
AVCOL_PRI_SMPTE240M = 7, ///< functionally identical to above
AVCOL_PRI_FILM = 8,
AVCOL_PRI_BT2020 = 9, ///< ITU-R BT2020
AVCOL_PRI_NB , ///< Not part of ABI
};
enum AVColorTransferCharacteristic{
AVCOL_TRC_BT709 = 1, ///< also ITU-R BT1361
AVCOL_TRC_UNSPECIFIED = 2,
AVCOL_TRC_GAMMA22 = 4, ///< also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM
AVCOL_TRC_GAMMA28 = 5, ///< also ITU-R BT470BG
AVCOL_TRC_SMPTE170M = 6, ///< also ITU-R BT601-6 525 or 625 / ITU-R BT1358 525 or 625 / ITU-R BT1700 NTSC
AVCOL_TRC_SMPTE240M = 7,
AVCOL_TRC_LINEAR = 8, ///< "Linear transfer characteristics"
AVCOL_TRC_LOG = 9, ///< "Logarithmic transfer characteristic (100:1 range)"
AVCOL_TRC_LOG_SQRT = 10, ///< "Logarithmic transfer characteristic (100 * Sqrt( 10 ) : 1 range)"
AVCOL_TRC_IEC61966_2_4 = 11, ///< IEC 61966-2-4
AVCOL_TRC_BT1361_ECG = 12, ///< ITU-R BT1361 Extended Colour Gamut
AVCOL_TRC_IEC61966_2_1 = 13, ///< IEC 61966-2-1 (sRGB or sYCC)
AVCOL_TRC_BT2020_10 = 14, ///< ITU-R BT2020 for 10 bit system
AVCOL_TRC_BT2020_12 = 15, ///< ITU-R BT2020 for 12 bit system
AVCOL_TRC_NB , ///< Not part of ABI
};
/**
* X X 3 4 X X are luma samples,
* 1 2 1-6 are possible chroma positions
* X X 5 6 X 0 is undefined/unknown position
*/
enum AVChromaLocation{
AVCHROMA_LOC_UNSPECIFIED = 0,
AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
AVCHROMA_LOC_TOPLEFT = 3, ///< DV
AVCHROMA_LOC_TOP = 4,
AVCHROMA_LOC_BOTTOMLEFT = 5,
AVCHROMA_LOC_BOTTOM = 6,
AVCHROMA_LOC_NB , ///< Not part of ABI
};
enum AVAudioServiceType {
AV_AUDIO_SERVICE_TYPE_MAIN = 0,
AV_AUDIO_SERVICE_TYPE_EFFECTS = 1,
AV_AUDIO_SERVICE_TYPE_VISUALLY_IMPAIRED = 2,
AV_AUDIO_SERVICE_TYPE_HEARING_IMPAIRED = 3,
AV_AUDIO_SERVICE_TYPE_DIALOGUE = 4,
AV_AUDIO_SERVICE_TYPE_COMMENTARY = 5,
AV_AUDIO_SERVICE_TYPE_EMERGENCY = 6,
AV_AUDIO_SERVICE_TYPE_VOICE_OVER = 7,
AV_AUDIO_SERVICE_TYPE_KARAOKE = 8,
AV_AUDIO_SERVICE_TYPE_NB , ///< Not part of ABI
};
/**
* @ingroup lavc_encoding
*/
typedef struct RcOverride{
int start_frame;
int end_frame;
int qscale; // If this is 0 then quality_factor will be used instead.
float quality_factor;
} RcOverride;
#if FF_API_MAX_BFRAMES
/**
* @deprecated there is no libavcodec-wide limit on the number of B-frames
*/
#define FF_MAX_B_FRAMES 16
#endif
/* encoding support
These flags can be passed in AVCodecContext.flags before initialization.
Note: Not everything is supported yet.
*/
/**
* Allow decoders to produce frames with data planes that are not aligned
* to CPU requirements (e.g. due to cropping).
*/
#define CODEC_FLAG_UNALIGNED 0x0001
#define CODEC_FLAG_QSCALE 0x0002 ///< Use fixed qscale.
#define CODEC_FLAG_4MV 0x0004 ///< 4 MV per MB allowed / advanced prediction for H.263.
#define CODEC_FLAG_OUTPUT_CORRUPT 0x0008 ///< Output even those frames that might be corrupted
#define CODEC_FLAG_QPEL 0x0010 ///< Use qpel MC.
#define CODEC_FLAG_GMC 0x0020 ///< Use GMC.
#define CODEC_FLAG_MV0 0x0040 ///< Always try a MB with MV=<0,0>.
/**
* The parent program guarantees that the input for B-frames containing
* streams is not written to for at least s->max_b_frames+1 frames, if
* this is not set the input will be copied.
*/
#define CODEC_FLAG_INPUT_PRESERVED 0x0100
#define CODEC_FLAG_PASS1 0x0200 ///< Use internal 2pass ratecontrol in first pass mode.
#define CODEC_FLAG_PASS2 0x0400 ///< Use internal 2pass ratecontrol in second pass mode.
#define CODEC_FLAG_GRAY 0x2000 ///< Only decode/encode grayscale.
#if FF_API_EMU_EDGE
/**
* @deprecated edges are not used/required anymore. I.e. this flag is now always
* set.
*/
#define CODEC_FLAG_EMU_EDGE 0x4000
#endif
#define CODEC_FLAG_PSNR 0x8000 ///< error[?] variables will be set during encoding.
#define CODEC_FLAG_TRUNCATED 0x00010000 /** Input bitstream might be truncated at a random
location instead of only at frame boundaries. */
#define CODEC_FLAG_NORMALIZE_AQP 0x00020000 ///< Normalize adaptive quantization.
#define CODEC_FLAG_INTERLACED_DCT 0x00040000 ///< Use interlaced DCT.
#define CODEC_FLAG_LOW_DELAY 0x00080000 ///< Force low delay.
#define CODEC_FLAG_GLOBAL_HEADER 0x00400000 ///< Place global headers in extradata instead of every keyframe.
#define CODEC_FLAG_BITEXACT 0x00800000 ///< Use only bitexact stuff (except (I)DCT).
/* Fx : Flag for h263+ extra options */
#define CODEC_FLAG_AC_PRED 0x01000000 ///< H.263 advanced intra coding / MPEG-4 AC prediction
#define CODEC_FLAG_LOOP_FILTER 0x00000800 ///< loop filter
#define CODEC_FLAG_INTERLACED_ME 0x20000000 ///< interlaced motion estimation
#define CODEC_FLAG_CLOSED_GOP 0x80000000
#define CODEC_FLAG2_FAST 0x00000001 ///< Allow non spec compliant speedup tricks.
#define CODEC_FLAG2_NO_OUTPUT 0x00000004 ///< Skip bitstream encoding.
#define CODEC_FLAG2_LOCAL_HEADER 0x00000008 ///< Place global headers at every keyframe instead of in extradata.
#define CODEC_FLAG2_DROP_FRAME_TIMECODE 0x00002000 ///< timecode is in drop frame format. DEPRECATED!!!!
#define CODEC_FLAG2_IGNORE_CROP 0x00010000 ///< Discard cropping information from SPS.
#define CODEC_FLAG2_CHUNKS 0x00008000 ///< Input bitstream might be truncated at a packet boundaries instead of only at frame boundaries.
#define CODEC_FLAG2_SHOW_ALL 0x00400000 ///< Show all frames before the first keyframe
/* Unsupported options :
* Syntax Arithmetic coding (SAC)
* Reference Picture Selection
* Independent Segment Decoding */
/* /Fx */
/* codec capabilities */
#define CODEC_CAP_DRAW_HORIZ_BAND 0x0001 ///< Decoder can use draw_horiz_band callback.
/**
* Codec uses get_buffer() for allocating buffers and supports custom allocators.
* If not set, it might not use get_buffer() at all or use operations that
* assume the buffer was allocated by avcodec_default_get_buffer.
*/
#define CODEC_CAP_DR1 0x0002
#define CODEC_CAP_TRUNCATED 0x0008
#if FF_API_XVMC
/* Codec can export data for HW decoding. This flag indicates that
* the codec would call get_format() with list that might contain HW accelerated
* pixel formats (XvMC, VDPAU, VAAPI, etc). The application can pick any of them
* including raw image format.
* The application can use the passed context to determine bitstream version,
* chroma format, resolution etc.
*/
#define CODEC_CAP_HWACCEL 0x0010
#endif /* FF_API_XVMC */
/**
* Encoder or decoder requires flushing with NULL input at the end in order to
* give the complete and correct output.
*
* NOTE: If this flag is not set, the codec is guaranteed to never be fed with
* with NULL data. The user can still send NULL data to the public encode
* or decode function, but libavcodec will not pass it along to the codec
* unless this flag is set.
*
* Decoders:
* The decoder has a non-zero delay and needs to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to get the delayed data until the decoder no longer
* returns frames.
*
* Encoders:
* The encoder needs to be fed with NULL data at the end of encoding until the
* encoder no longer returns data.
*
* NOTE: For encoders implementing the AVCodec.encode2() function, setting this
* flag also means that the encoder must set the pts and duration for
* each output packet. If this flag is not set, the pts and duration will
* be determined by libavcodec from the input frame.
*/
#define CODEC_CAP_DELAY 0x0020
/**
* Codec can be fed a final frame with a smaller size.
* This can be used to prevent truncation of the last audio samples.
*/
#define CODEC_CAP_SMALL_LAST_FRAME 0x0040
#if FF_API_CAP_VDPAU
/**
* Codec can export data for HW decoding (VDPAU).
*/
#define CODEC_CAP_HWACCEL_VDPAU 0x0080
#endif
/**
* Codec can output multiple frames per AVPacket
* Normally demuxers return one frame at a time, demuxers which do not do
* are connected to a parser to split what they return into proper frames.
* This flag is reserved to the very rare category of codecs which have a
* bitstream that cannot be split into frames without timeconsuming
* operations like full decoding. Demuxers carring such bitstreams thus
* may return multiple frames in a packet. This has many disadvantages like
* prohibiting stream copy in many cases thus it should only be considered
* as a last resort.
*/
#define CODEC_CAP_SUBFRAMES 0x0100
/**
* Codec is experimental and is thus avoided in favor of non experimental
* encoders
*/
#define CODEC_CAP_EXPERIMENTAL 0x0200
/**
* Codec should fill in channel configuration and samplerate instead of container
*/
#define CODEC_CAP_CHANNEL_CONF 0x0400
#if FF_API_NEG_LINESIZES
/**
* @deprecated no codecs use this capability
*/
#define CODEC_CAP_NEG_LINESIZES 0x0800
#endif
/**
* Codec supports frame-level multithreading.
*/
#define CODEC_CAP_FRAME_THREADS 0x1000
/**
* Codec supports slice-based (or partition-based) multithreading.
*/
#define CODEC_CAP_SLICE_THREADS 0x2000
/**
* Codec supports changed parameters at any point.
*/
#define CODEC_CAP_PARAM_CHANGE 0x4000
/**
* Codec supports avctx->thread_count == 0 (auto).
*/
#define CODEC_CAP_AUTO_THREADS 0x8000
/**
* Audio encoder supports receiving a different number of samples in each call.
*/
#define CODEC_CAP_VARIABLE_FRAME_SIZE 0x10000
/**
* Codec is intra only.
*/
#define CODEC_CAP_INTRA_ONLY 0x40000000
/**
* Codec is lossless.
*/
#define CODEC_CAP_LOSSLESS 0x80000000
#if FF_API_MB_TYPE
//The following defines may change, don't expect compatibility if you use them.
#define MB_TYPE_INTRA4x4 0x0001
#define MB_TYPE_INTRA16x16 0x0002 //FIXME H.264-specific
#define MB_TYPE_INTRA_PCM 0x0004 //FIXME H.264-specific
#define MB_TYPE_16x16 0x0008
#define MB_TYPE_16x8 0x0010
#define MB_TYPE_8x16 0x0020
#define MB_TYPE_8x8 0x0040
#define MB_TYPE_INTERLACED 0x0080
#define MB_TYPE_DIRECT2 0x0100 //FIXME
#define MB_TYPE_ACPRED 0x0200
#define MB_TYPE_GMC 0x0400
#define MB_TYPE_SKIP 0x0800
#define MB_TYPE_P0L0 0x1000
#define MB_TYPE_P1L0 0x2000
#define MB_TYPE_P0L1 0x4000
#define MB_TYPE_P1L1 0x8000
#define MB_TYPE_L0 (MB_TYPE_P0L0 | MB_TYPE_P1L0)
#define MB_TYPE_L1 (MB_TYPE_P0L1 | MB_TYPE_P1L1)
#define MB_TYPE_L0L1 (MB_TYPE_L0 | MB_TYPE_L1)
#define MB_TYPE_QUANT 0x00010000
#define MB_TYPE_CBP 0x00020000
//Note bits 24-31 are reserved for codec specific use (h264 ref0, mpeg1 0mv, ...)
#endif
/**
* Pan Scan area.
* This specifies the area which should be displayed.
* Note there may be multiple such areas for one frame.
*/
typedef struct AVPanScan{
/**
* id
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int id;
/**
* width and height in 1/16 pel
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int width;
int height;
/**
* position of the top left corner in 1/16 pel for up to 3 fields/frames
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int16_t position[3][2];
}AVPanScan;
#if FF_API_QSCALE_TYPE
#define FF_QSCALE_TYPE_MPEG1 0
#define FF_QSCALE_TYPE_MPEG2 1
#define FF_QSCALE_TYPE_H264 2
#define FF_QSCALE_TYPE_VP56 3
#endif
#if FF_API_GET_BUFFER
#define FF_BUFFER_TYPE_INTERNAL 1
#define FF_BUFFER_TYPE_USER 2 ///< direct rendering buffers (image is (de)allocated by user)
#define FF_BUFFER_TYPE_SHARED 4 ///< Buffer from somewhere else; don't deallocate image (data/base), all other tables are not shared.
#define FF_BUFFER_TYPE_COPY 8 ///< Just a (modified) copy of some other buffer, don't deallocate anything.
#define FF_BUFFER_HINTS_VALID 0x01 // Buffer hints value is meaningful (if 0 ignore).
#define FF_BUFFER_HINTS_READABLE 0x02 // Codec will read from buffer.
#define FF_BUFFER_HINTS_PRESERVE 0x04 // User must not alter buffer content.
#define FF_BUFFER_HINTS_REUSABLE 0x08 // Codec will reuse the buffer (update).
#endif
/**
* The decoder will keep a reference to the frame and may reuse it later.
*/
#define AV_GET_BUFFER_FLAG_REF (1 << 0)
/**
* @defgroup lavc_packet AVPacket
*
* Types and functions for working with AVPacket.
* @{
*/
enum AVPacketSideDataType {
AV_PKT_DATA_PALETTE,
AV_PKT_DATA_NEW_EXTRADATA,
/**
* An AV_PKT_DATA_PARAM_CHANGE side data packet is laid out as follows:
* @code
* u32le param_flags
* if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_COUNT)
* s32le channel_count
* if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_LAYOUT)
* u64le channel_layout
* if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_SAMPLE_RATE)
* s32le sample_rate
* if (param_flags & AV_SIDE_DATA_PARAM_CHANGE_DIMENSIONS)
* s32le width
* s32le height
* @endcode
*/
AV_PKT_DATA_PARAM_CHANGE,
/**
* An AV_PKT_DATA_H263_MB_INFO side data packet contains a number of
* structures with info about macroblocks relevant to splitting the
* packet into smaller packets on macroblock edges (e.g. as for RFC 2190).
* That is, it does not necessarily contain info about all macroblocks,
* as long as the distance between macroblocks in the info is smaller
* than the target payload size.
* Each MB info structure is 12 bytes, and is laid out as follows:
* @code
* u32le bit offset from the start of the packet
* u8 current quantizer at the start of the macroblock
* u8 GOB number
* u16le macroblock address within the GOB
* u8 horizontal MV predictor
* u8 vertical MV predictor
* u8 horizontal MV predictor for block number 3
* u8 vertical MV predictor for block number 3
* @endcode
*/
AV_PKT_DATA_H263_MB_INFO,
/**
* Recommmends skipping the specified number of samples
* @code
* u32le number of samples to skip from start of this packet
* u32le number of samples to skip from end of this packet
* u8 reason for start skip
* u8 reason for end skip (0=padding silence, 1=convergence)
* @endcode
*/
AV_PKT_DATA_SKIP_SAMPLES=70,
/**
* An AV_PKT_DATA_JP_DUALMONO side data packet indicates that
* the packet may contain "dual mono" audio specific to Japanese DTV
* and if it is true, recommends only the selected channel to be used.
* @code
* u8 selected channels (0=mail/left, 1=sub/right, 2=both)
* @endcode
*/
AV_PKT_DATA_JP_DUALMONO,
/**
* A list of zero terminated key/value strings. There is no end marker for
* the list, so it is required to rely on the side data size to stop.
*/
AV_PKT_DATA_STRINGS_METADATA,
/**
* Subtitle event position
* @code
* u32le x1
* u32le y1
* u32le x2
* u32le y2
* @endcode
*/
AV_PKT_DATA_SUBTITLE_POSITION,
/**
* Data found in BlockAdditional element of matroska container. There is
* no end marker for the data, so it is required to rely on the side data
* size to recognize the end. 8 byte id (as found in BlockAddId) followed
* by data.
*/
AV_PKT_DATA_MATROSKA_BLOCKADDITIONAL,
/**
* The optional first identifier line of a WebVTT cue.
*/
AV_PKT_DATA_WEBVTT_IDENTIFIER,
/**
* The optional settings (rendering instructions) that immediately
* follow the timestamp specifier of a WebVTT cue.
*/
AV_PKT_DATA_WEBVTT_SETTINGS,
/**
* A list of zero terminated key/value strings. There is no end marker for
* the list, so it is required to rely on the side data size to stop. This
* side data includes updated metadata which appeared in the stream.
*/
AV_PKT_DATA_METADATA_UPDATE,
};
/**
* This structure stores compressed data. It is typically exported by demuxers
* and then passed as input to decoders, or received as output from encoders and
* then passed to muxers.
*
* For video, it should typically contain one compressed frame. For audio it may
* contain several compressed frames.
*
* AVPacket is one of the few structs in FFmpeg, whose size is a part of public
* ABI. Thus it may be allocated on stack and no new fields can be added to it
* without libavcodec and libavformat major bump.
*
* The semantics of data ownership depends on the buf or destruct (deprecated)
* fields. If either is set, the packet data is dynamically allocated and is
* valid indefinitely until av_free_packet() is called (which in turn calls
* av_buffer_unref()/the destruct callback to free the data). If neither is set,
* the packet data is typically backed by some static buffer somewhere and is
* only valid for a limited time (e.g. until the next read call when demuxing).
*
* The side data is always allocated with av_malloc() and is freed in
* av_free_packet().
*/
typedef struct AVPacket {
/**
* A reference to the reference-counted buffer where the packet data is
* stored.
* May be NULL, then the packet data is not reference-counted.
*/
AVBufferRef *buf;
/**
* Presentation timestamp in AVStream->time_base units; the time at which
* the decompressed packet will be presented to the user.
* Can be AV_NOPTS_VALUE if it is not stored in the file.
* pts MUST be larger or equal to dts as presentation cannot happen before
* decompression, unless one wants to view hex dumps. Some formats misuse
* the terms dts and pts/cts to mean something different. Such timestamps
* must be converted to true pts/dts before they are stored in AVPacket.
*/
int64_t pts;
/**
* Decompression timestamp in AVStream->time_base units; the time at which
* the packet is decompressed.
* Can be AV_NOPTS_VALUE if it is not stored in the file.
*/
int64_t dts;
uint8_t *data;
int size;
int stream_index;
/**
* A combination of AV_PKT_FLAG values
*/
int flags;
/**
* Additional packet data that can be provided by the container.
* Packet can contain several types of side information.
*/
struct {
uint8_t *data;
int size;
enum AVPacketSideDataType type;
} *side_data;
int side_data_elems;
/**
* Duration of this packet in AVStream->time_base units, 0 if unknown.
* Equals next_pts - this_pts in presentation order.
*/
int duration;
#if FF_API_DESTRUCT_PACKET
attribute_deprecated
void (*destruct)(struct AVPacket *);
attribute_deprecated
void *priv;
#endif
int64_t pos; ///< byte position in stream, -1 if unknown
/**
* Time difference in AVStream->time_base units from the pts of this
* packet to the point at which the output from the decoder has converged
* independent from the availability of previous frames. That is, the
* frames are virtually identical no matter if decoding started from
* the very first frame or from this keyframe.
* Is AV_NOPTS_VALUE if unknown.
* This field is not the display duration of the current packet.
* This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
* set.
*
* The purpose of this field is to allow seeking in streams that have no
* keyframes in the conventional sense. It corresponds to the
* recovery point SEI in H.264 and match_time_delta in NUT. It is also
* essential for some types of subtitle streams to ensure that all
* subtitles are correctly displayed after seeking.
*/
int64_t convergence_duration;
} AVPacket;
#define AV_PKT_FLAG_KEY 0x0001 ///< The packet contains a keyframe
#define AV_PKT_FLAG_CORRUPT 0x0002 ///< The packet content is corrupted
enum AVSideDataParamChangeFlags {
AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_COUNT = 0x0001,
AV_SIDE_DATA_PARAM_CHANGE_CHANNEL_LAYOUT = 0x0002,
AV_SIDE_DATA_PARAM_CHANGE_SAMPLE_RATE = 0x0004,
AV_SIDE_DATA_PARAM_CHANGE_DIMENSIONS = 0x0008,
};
/**
* @}
*/
struct AVCodecInternal;
enum AVFieldOrder {
AV_FIELD_UNKNOWN,
AV_FIELD_PROGRESSIVE,
AV_FIELD_TT, //< Top coded_first, top displayed first
AV_FIELD_BB, //< Bottom coded first, bottom displayed first
AV_FIELD_TB, //< Top coded first, bottom displayed first
AV_FIELD_BT, //< Bottom coded first, top displayed first
};
/**
* main external API structure.
* New fields can be added to the end with minor version bumps.
* Removal, reordering and changes to existing fields require a major
* version bump.
* Please use AVOptions (av_opt* / av_set/get*()) to access these fields from user
* applications.
* sizeof(AVCodecContext) must not be used outside libav*.
*/
typedef struct AVCodecContext {
/**
* information on struct for av_log
* - set by avcodec_alloc_context3
*/
const AVClass *av_class;
int log_level_offset;
enum AVMediaType codec_type; /* see AVMEDIA_TYPE_xxx */
const struct AVCodec *codec;
char codec_name[32];
enum AVCodecID codec_id; /* see AV_CODEC_ID_xxx */
/**
* fourcc (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* This is used to work around some encoder bugs.
* A demuxer should set this to what is stored in the field used to identify the codec.
* If there are multiple such fields in a container then the demuxer should choose the one
* which maximizes the information about the used codec.
* If the codec tag field in a container is larger than 32 bits then the demuxer should
* remap the longer ID to 32 bits with a table or other structure. Alternatively a new
* extra_codec_tag + size could be added but for this a clear advantage must be demonstrated
* first.
* - encoding: Set by user, if not then the default based on codec_id will be used.
* - decoding: Set by user, will be converted to uppercase by libavcodec during init.
*/
unsigned int codec_tag;
/**
* fourcc from the AVI stream header (LSB first, so "ABCD" -> ('D'<<24) + ('C'<<16) + ('B'<<8) + 'A').
* This is used to work around some encoder bugs.
* - encoding: unused
* - decoding: Set by user, will be converted to uppercase by libavcodec during init.
*/
unsigned int stream_codec_tag;
void *priv_data;
/**
* Private context used for internal data.
*
* Unlike priv_data, this is not codec-specific. It is used in general
* libavcodec functions.
*/
struct AVCodecInternal *internal;
/**
* Private data of the user, can be used to carry app specific stuff.
* - encoding: Set by user.
* - decoding: Set by user.
*/
void *opaque;
/**
* the average bitrate
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: Set by libavcodec. 0 or some bitrate if this info is available in the stream.
*/
int bit_rate;
/**
* number of bits the bitstream is allowed to diverge from the reference.
* the reference can be CBR (for CBR pass1) or VBR (for pass2)
* - encoding: Set by user; unused for constant quantizer encoding.
* - decoding: unused
*/
int bit_rate_tolerance;
/**
* Global quality for codecs which cannot change it per frame.
* This should be proportional to MPEG-1/2/4 qscale.
* - encoding: Set by user.
* - decoding: unused
*/
int global_quality;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int compression_level;
#define FF_COMPRESSION_DEFAULT -1
/**
* CODEC_FLAG_*.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags;
/**
* CODEC_FLAG2_*
* - encoding: Set by user.
* - decoding: Set by user.
*/
int flags2;
/**
* some codecs need / can use extradata like Huffman tables.
* mjpeg: Huffman tables
* rv10: additional flags
* mpeg4: global headers (they can be in the bitstream or here)
* The allocated memory should be FF_INPUT_BUFFER_PADDING_SIZE bytes larger
* than extradata_size to avoid problems if it is read with the bitstream reader.
* The bytewise contents of extradata must not depend on the architecture or CPU endianness.
* - encoding: Set/allocated/freed by libavcodec.
* - decoding: Set/allocated/freed by user.
*/
uint8_t *extradata;
int extradata_size;
/**
* This is the fundamental unit of time (in seconds) in terms
* of which frame timestamps are represented. For fixed-fps content,
* timebase should be 1/framerate and timestamp increments should be
* identically 1.
* - encoding: MUST be set by user.
* - decoding: Set by libavcodec.
*/
AVRational time_base;
/**
* For some codecs, the time base is closer to the field rate than the frame rate.
* Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
* if no telecine is used ...
*
* Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
*/
int ticks_per_frame;
/**
* Codec delay.
*
* Encoding: Number of frames delay there will be from the encoder input to
* the decoder output. (we assume the decoder matches the spec)
* Decoding: Number of frames delay in addition to what a standard decoder
* as specified in the spec would produce.
*
* Video:
* Number of frames the decoded output will be delayed relative to the
* encoded input.
*
* Audio:
* For encoding, this is the number of "priming" samples added to the
* beginning of the stream. The decoded output will be delayed by this
* many samples relative to the input to the encoder. Note that this
* field is purely informational and does not directly affect the pts
* output by the encoder, which should always be based on the actual
* presentation time, including any delay.
* For decoding, this is the number of samples the decoder needs to
* output before the decoder's output is valid. When seeking, you should
* start decoding this many samples prior to your desired seek point.
*
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int delay;
/* video only */
/**
* picture width / height.
* - encoding: MUST be set by user.
* - decoding: May be set by the user before opening the decoder if known e.g.
* from the container. Some decoders will require the dimensions
* to be set by the caller. During decoding, the decoder may
* overwrite those values as required.
*/
int width, height;
/**
* Bitstream width / height, may be different from width/height e.g. when
* the decoded frame is cropped before being output or lowres is enabled.
* - encoding: unused
* - decoding: May be set by the user before opening the decoder if known
* e.g. from the container. During decoding, the decoder may
* overwrite those values as required.
*/
int coded_width, coded_height;
#if FF_API_ASPECT_EXTENDED
#define FF_ASPECT_EXTENDED 15
#endif
/**
* the number of pictures in a group of pictures, or 0 for intra_only
* - encoding: Set by user.
* - decoding: unused
*/
int gop_size;
/**
* Pixel format, see AV_PIX_FMT_xxx.
* May be set by the demuxer if known from headers.
* May be overridden by the decoder if it knows better.
* - encoding: Set by user.
* - decoding: Set by user if known, overridden by libavcodec if known
*/
enum AVPixelFormat pix_fmt;
/**
* Motion estimation algorithm used for video coding.
* 1 (zero), 2 (full), 3 (log), 4 (phods), 5 (epzs), 6 (x1), 7 (hex),
* 8 (umh), 9 (iter), 10 (tesa) [7, 8, 10 are x264 specific, 9 is snow specific]
* - encoding: MUST be set by user.
* - decoding: unused
*/
int me_method;
/**
* If non NULL, 'draw_horiz_band' is called by the libavcodec
* decoder to draw a horizontal band. It improves cache usage. Not
* all codecs can do that. You must check the codec capabilities
* beforehand.
* When multithreading is used, it may be called from multiple threads
* at the same time; threads might draw different parts of the same AVFrame,
* or multiple AVFrames, and there is no guarantee that slices will be drawn
* in order.
* The function is also used by hardware acceleration APIs.
* It is called at least once during frame decoding to pass
* the data needed for hardware render.
* In that mode instead of pixel data, AVFrame points to
* a structure specific to the acceleration API. The application
* reads the structure and can change some fields to indicate progress
* or mark state.
* - encoding: unused
* - decoding: Set by user.
* @param height the height of the slice
* @param y the y position of the slice
* @param type 1->top field, 2->bottom field, 3->frame
* @param offset offset into the AVFrame.data from which the slice should be read
*/
void (*draw_horiz_band)(struct AVCodecContext *s,
const AVFrame *src, int offset[AV_NUM_DATA_POINTERS],
int y, int type, int height);
/**
* callback to negotiate the pixelFormat
* @param fmt is the list of formats which are supported by the codec,
* it is terminated by -1 as 0 is a valid format, the formats are ordered by quality.
* The first is always the native one.
* @return the chosen format
* - encoding: unused
* - decoding: Set by user, if not set the native format will be chosen.
*/
enum AVPixelFormat (*get_format)(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
/**
* maximum number of B-frames between non-B-frames
* Note: The output will be delayed by max_b_frames+1 relative to the input.
* - encoding: Set by user.
* - decoding: unused
*/
int max_b_frames;
/**
* qscale factor between IP and B-frames
* If > 0 then the last P-frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_factor;
/** obsolete FIXME remove */
int rc_strategy;
#define FF_RC_STRATEGY_XVID 1
int b_frame_strategy;
/**
* qscale offset between IP and B-frames
* - encoding: Set by user.
* - decoding: unused
*/
float b_quant_offset;
/**
* Size of the frame reordering buffer in the decoder.
* For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int has_b_frames;
/**
* 0-> h263 quant 1-> mpeg quant
* - encoding: Set by user.
* - decoding: unused
*/
int mpeg_quant;
/**
* qscale factor between P and I-frames
* If > 0 then the last p frame quantizer will be used (q= lastp_q*factor+offset).
* If < 0 then normal ratecontrol will be done (q= -normal_q*factor+offset).
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_factor;
/**
* qscale offset between P and I-frames
* - encoding: Set by user.
* - decoding: unused
*/
float i_quant_offset;
/**
* luminance masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float lumi_masking;
/**
* temporary complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float temporal_cplx_masking;
/**
* spatial complexity masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float spatial_cplx_masking;
/**
* p block masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float p_masking;
/**
* darkness masking (0-> disabled)
* - encoding: Set by user.
* - decoding: unused
*/
float dark_masking;
/**
* slice count
* - encoding: Set by libavcodec.
* - decoding: Set by user (or 0).
*/
int slice_count;
/**
* prediction method (needed for huffyuv)
* - encoding: Set by user.
* - decoding: unused
*/
int prediction_method;
#define FF_PRED_LEFT 0
#define FF_PRED_PLANE 1
#define FF_PRED_MEDIAN 2
/**
* slice offsets in the frame in bytes
* - encoding: Set/allocated by libavcodec.
* - decoding: Set/allocated by user (or NULL).
*/
int *slice_offset;
/**
* sample aspect ratio (0 if unknown)
* That is the width of a pixel divided by the height of the pixel.
* Numerator and denominator must be relatively prime and smaller than 256 for some video standards.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
AVRational sample_aspect_ratio;
/**
* motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_cmp;
/**
* subpixel motion estimation comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_sub_cmp;
/**
* macroblock comparison function (not supported yet)
* - encoding: Set by user.
* - decoding: unused
*/
int mb_cmp;
/**
* interlaced DCT comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int ildct_cmp;
#define FF_CMP_SAD 0
#define FF_CMP_SSE 1
#define FF_CMP_SATD 2
#define FF_CMP_DCT 3
#define FF_CMP_PSNR 4
#define FF_CMP_BIT 5
#define FF_CMP_RD 6
#define FF_CMP_ZERO 7
#define FF_CMP_VSAD 8
#define FF_CMP_VSSE 9
#define FF_CMP_NSSE 10
#define FF_CMP_W53 11
#define FF_CMP_W97 12
#define FF_CMP_DCTMAX 13
#define FF_CMP_DCT264 14
#define FF_CMP_CHROMA 256
/**
* ME diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int dia_size;
/**
* amount of previous MV predictors (2a+1 x 2a+1 square)
* - encoding: Set by user.
* - decoding: unused
*/
int last_predictor_count;
/**
* prepass for motion estimation
* - encoding: Set by user.
* - decoding: unused
*/
int pre_me;
/**
* motion estimation prepass comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int me_pre_cmp;
/**
* ME prepass diamond size & shape
* - encoding: Set by user.
* - decoding: unused
*/
int pre_dia_size;
/**
* subpel ME quality
* - encoding: Set by user.
* - decoding: unused
*/
int me_subpel_quality;
/**
* DTG active format information (additional aspect ratio
* information only used in DVB MPEG-2 transport streams)
* 0 if not set.
*
* - encoding: unused
* - decoding: Set by decoder.
*/
int dtg_active_format;
#define FF_DTG_AFD_SAME 8
#define FF_DTG_AFD_4_3 9
#define FF_DTG_AFD_16_9 10
#define FF_DTG_AFD_14_9 11
#define FF_DTG_AFD_4_3_SP_14_9 13
#define FF_DTG_AFD_16_9_SP_14_9 14
#define FF_DTG_AFD_SP_4_3 15
/**
* maximum motion estimation search range in subpel units
* If 0 then no limit.
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_range;
/**
* intra quantizer bias
* - encoding: Set by user.
* - decoding: unused
*/
int intra_quant_bias;
#define FF_DEFAULT_QUANT_BIAS 999999
/**
* inter quantizer bias
* - encoding: Set by user.
* - decoding: unused
*/
int inter_quant_bias;
/**
* slice flags
* - encoding: unused
* - decoding: Set by user.
*/
int slice_flags;
#define SLICE_FLAG_CODED_ORDER 0x0001 ///< draw_horiz_band() is called in coded order instead of display
#define SLICE_FLAG_ALLOW_FIELD 0x0002 ///< allow draw_horiz_band() with field slices (MPEG2 field pics)
#define SLICE_FLAG_ALLOW_PLANE 0x0004 ///< allow draw_horiz_band() with 1 component at a time (SVQ1)
#if FF_API_XVMC
/**
* XVideo Motion Acceleration
* - encoding: forbidden
* - decoding: set by decoder
* @deprecated XvMC doesn't need it anymore.
*/
attribute_deprecated int xvmc_acceleration;
#endif /* FF_API_XVMC */
/**
* macroblock decision mode
* - encoding: Set by user.
* - decoding: unused
*/
int mb_decision;
#define FF_MB_DECISION_SIMPLE 0 ///< uses mb_cmp
#define FF_MB_DECISION_BITS 1 ///< chooses the one which needs the fewest bits
#define FF_MB_DECISION_RD 2 ///< rate distortion
/**
* custom intra quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *intra_matrix;
/**
* custom inter quantization matrix
* - encoding: Set by user, can be NULL.
* - decoding: Set by libavcodec.
*/
uint16_t *inter_matrix;
/**
* scene change detection threshold
* 0 is default, larger means fewer detected scene changes.
* - encoding: Set by user.
* - decoding: unused
*/
int scenechange_threshold;
/**
* noise reduction strength
* - encoding: Set by user.
* - decoding: unused
*/
int noise_reduction;
/**
* Motion estimation threshold below which no motion estimation is
* performed, but instead the user specified motion vectors are used.
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_threshold;
/**
* Macroblock threshold below which the user specified macroblock types will be used.
* - encoding: Set by user.
* - decoding: unused
*/
int mb_threshold;
/**
* precision of the intra DC coefficient - 8
* - encoding: Set by user.
* - decoding: unused
*/
int intra_dc_precision;
/**
* Number of macroblock rows at the top which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_top;
/**
* Number of macroblock rows at the bottom which are skipped.
* - encoding: unused
* - decoding: Set by user.
*/
int skip_bottom;
/**
* Border processing masking, raises the quantizer for mbs on the borders
* of the picture.
* - encoding: Set by user.
* - decoding: unused
*/
float border_masking;
/**
* minimum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmin;
/**
* maximum MB lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int mb_lmax;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int me_penalty_compensation;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int bidir_refine;
/**
*
* - encoding: Set by user.
* - decoding: unused
*/
int brd_scale;
/**
* minimum GOP size
* - encoding: Set by user.
* - decoding: unused
*/
int keyint_min;
/**
* number of reference frames
* - encoding: Set by user.
* - decoding: Set by lavc.
*/
int refs;
/**
* chroma qp offset from luma
* - encoding: Set by user.
* - decoding: unused
*/
int chromaoffset;
/**
* Multiplied by qscale for each frame and added to scene_change_score.
* - encoding: Set by user.
* - decoding: unused
*/
int scenechange_factor;
/**
*
* Note: Value depends upon the compare function used for fullpel ME.
* - encoding: Set by user.
* - decoding: unused
*/
int mv0_threshold;
/**
* Adjust sensitivity of b_frame_strategy 1.
* - encoding: Set by user.
* - decoding: unused
*/
int b_sensitivity;
/**
* Chromaticity coordinates of the source primaries.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorPrimaries color_primaries;
/**
* Color Transfer Characteristic.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorTransferCharacteristic color_trc;
/**
* YUV colorspace type.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorSpace colorspace;
/**
* MPEG vs JPEG YUV range.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorRange color_range;
/**
* This defines the location of chroma samples.
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVChromaLocation chroma_sample_location;
/**
* Number of slices.
* Indicates number of picture subdivisions. Used for parallelized
* decoding.
* - encoding: Set by user
* - decoding: unused
*/
int slices;
/** Field order
* - encoding: set by libavcodec
* - decoding: Set by user.
*/
enum AVFieldOrder field_order;
/* audio only */
int sample_rate; ///< samples per second
int channels; ///< number of audio channels
/**
* audio sample format
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum AVSampleFormat sample_fmt; ///< sample format
/* The following data should not be initialized. */
/**
* Number of samples per channel in an audio frame.
*
* - encoding: set by libavcodec in avcodec_open2(). Each submitted frame
* except the last must contain exactly frame_size samples per channel.
* May be 0 when the codec has CODEC_CAP_VARIABLE_FRAME_SIZE set, then the
* frame size is not restricted.
* - decoding: may be set by some decoders to indicate constant frame size
*/
int frame_size;
/**
* Frame counter, set by libavcodec.
*
* - decoding: total number of frames returned from the decoder so far.
* - encoding: total number of frames passed to the encoder so far.
*
* @note the counter is not incremented if encoding/decoding resulted in
* an error.
*/
int frame_number;
/**
* number of bytes per packet if constant and known or 0
* Used by some WAV based audio codecs.
*/
int block_align;
/**
* Audio cutoff bandwidth (0 means "automatic")
* - encoding: Set by user.
* - decoding: unused
*/
int cutoff;
#if FF_API_REQUEST_CHANNELS
/**
* Decoder should decode to this many channels if it can (0 for default)
* - encoding: unused
* - decoding: Set by user.
* @deprecated Deprecated in favor of request_channel_layout.
*/
attribute_deprecated int request_channels;
#endif
/**
* Audio channel layout.
* - encoding: set by user.
* - decoding: set by user, may be overwritten by libavcodec.
*/
uint64_t channel_layout;
/**
* Request decoder to use this channel layout if it can (0 for default)
* - encoding: unused
* - decoding: Set by user.
*/
uint64_t request_channel_layout;
/**
* Type of service that the audio stream conveys.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
enum AVAudioServiceType audio_service_type;
/**
* desired sample format
* - encoding: Not used.
* - decoding: Set by user.
* Decoder will decode to this format if it can.
*/
enum AVSampleFormat request_sample_fmt;
#if FF_API_GET_BUFFER
/**
* Called at the beginning of each frame to get a buffer for it.
*
* The function will set AVFrame.data[], AVFrame.linesize[].
* AVFrame.extended_data[] must also be set, but it should be the same as
* AVFrame.data[] except for planar audio with more channels than can fit
* in AVFrame.data[]. In that case, AVFrame.data[] shall still contain as
* many data pointers as it can hold.
*
* if CODEC_CAP_DR1 is not set then get_buffer() must call
* avcodec_default_get_buffer() instead of providing buffers allocated by
* some other means.
*
* AVFrame.data[] should be 32- or 16-byte-aligned unless the CPU doesn't
* need it. avcodec_default_get_buffer() aligns the output buffer properly,
* but if get_buffer() is overridden then alignment considerations should
* be taken into account.
*
* @see avcodec_default_get_buffer()
*
* Video:
*
* If pic.reference is set then the frame will be read later by libavcodec.
* avcodec_align_dimensions2() should be used to find the required width and
* height, as they normally need to be rounded up to the next multiple of 16.
*
* If frame multithreading is used and thread_safe_callbacks is set,
* it may be called from a different thread, but not from more than one at
* once. Does not need to be reentrant.
*
* @see release_buffer(), reget_buffer()
* @see avcodec_align_dimensions2()
*
* Audio:
*
* Decoders request a buffer of a particular size by setting
* AVFrame.nb_samples prior to calling get_buffer(). The decoder may,
* however, utilize only part of the buffer by setting AVFrame.nb_samples
* to a smaller value in the output frame.
*
* Decoders cannot use the buffer after returning from
* avcodec_decode_audio4(), so they will not call release_buffer(), as it
* is assumed to be released immediately upon return. In some rare cases,
* a decoder may need to call get_buffer() more than once in a single
* call to avcodec_decode_audio4(). In that case, when get_buffer() is
* called again after it has already been called once, the previously
* acquired buffer is assumed to be released at that time and may not be
* reused by the decoder.
*
* As a convenience, av_samples_get_buffer_size() and
* av_samples_fill_arrays() in libavutil may be used by custom get_buffer()
* functions to find the required data size and to fill data pointers and
* linesize. In AVFrame.linesize, only linesize[0] may be set for audio
* since all planes must be the same size.
*
* @see av_samples_get_buffer_size(), av_samples_fill_arrays()
*
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*
* @deprecated use get_buffer2()
*/
attribute_deprecated
int (*get_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Called to release buffers which were allocated with get_buffer.
* A released buffer can be reused in get_buffer().
* pic.data[*] must be set to NULL.
* May be called from a different thread if frame multithreading is used,
* but not by more than one thread at once, so does not need to be reentrant.
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*
* @deprecated custom freeing callbacks should be set from get_buffer2()
*/
attribute_deprecated
void (*release_buffer)(struct AVCodecContext *c, AVFrame *pic);
/**
* Called at the beginning of a frame to get cr buffer for it.
* Buffer type (size, hints) must be the same. libavcodec won't check it.
* libavcodec will pass previous buffer in pic, function should return
* same buffer or new buffer with old frame "painted" into it.
* If pic.data[0] == NULL must behave like get_buffer().
* if CODEC_CAP_DR1 is not set then reget_buffer() must call
* avcodec_default_reget_buffer() instead of providing buffers allocated by
* some other means.
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*/
attribute_deprecated
int (*reget_buffer)(struct AVCodecContext *c, AVFrame *pic);
#endif
/**
* This callback is called at the beginning of each frame to get data
* buffer(s) for it. There may be one contiguous buffer for all the data or
* there may be a buffer per each data plane or anything in between. What
* this means is, you may set however many entries in buf[] you feel necessary.
* Each buffer must be reference-counted using the AVBuffer API (see description
* of buf[] below).
*
* The following fields will be set in the frame before this callback is
* called:
* - format
* - width, height (video only)
* - sample_rate, channel_layout, nb_samples (audio only)
* Their values may differ from the corresponding values in
* AVCodecContext. This callback must use the frame values, not the codec
* context values, to calculate the required buffer size.
*
* This callback must fill the following fields in the frame:
* - data[]
* - linesize[]
* - extended_data:
* * if the data is planar audio with more than 8 channels, then this
* callback must allocate and fill extended_data to contain all pointers
* to all data planes. data[] must hold as many pointers as it can.
* extended_data must be allocated with av_malloc() and will be freed in
* av_frame_unref().
* * otherwise exended_data must point to data
* - buf[] must contain one or more pointers to AVBufferRef structures. Each of
* the frame's data and extended_data pointers must be contained in these. That
* is, one AVBufferRef for each allocated chunk of memory, not necessarily one
* AVBufferRef per data[] entry. See: av_buffer_create(), av_buffer_alloc(),
* and av_buffer_ref().
* - extended_buf and nb_extended_buf must be allocated with av_malloc() by
* this callback and filled with the extra buffers if there are more
* buffers than buf[] can hold. extended_buf will be freed in
* av_frame_unref().
*
* If CODEC_CAP_DR1 is not set then get_buffer2() must call
* avcodec_default_get_buffer2() instead of providing buffers allocated by
* some other means.
*
* Each data plane must be aligned to the maximum required by the target
* CPU.
*
* @see avcodec_default_get_buffer2()
*
* Video:
*
* If AV_GET_BUFFER_FLAG_REF is set in flags then the frame may be reused
* (read and/or written to if it is writable) later by libavcodec.
*
* avcodec_align_dimensions2() should be used to find the required width and
* height, as they normally need to be rounded up to the next multiple of 16.
*
* Some decoders do not support linesizes changing between frames.
*
* If frame multithreading is used and thread_safe_callbacks is set,
* this callback may be called from a different thread, but not from more
* than one at once. Does not need to be reentrant.
*
* @see avcodec_align_dimensions2()
*
* Audio:
*
* Decoders request a buffer of a particular size by setting
* AVFrame.nb_samples prior to calling get_buffer2(). The decoder may,
* however, utilize only part of the buffer by setting AVFrame.nb_samples
* to a smaller value in the output frame.
*
* As a convenience, av_samples_get_buffer_size() and
* av_samples_fill_arrays() in libavutil may be used by custom get_buffer2()
* functions to find the required data size and to fill data pointers and
* linesize. In AVFrame.linesize, only linesize[0] may be set for audio
* since all planes must be the same size.
*
* @see av_samples_get_buffer_size(), av_samples_fill_arrays()
*
* - encoding: unused
* - decoding: Set by libavcodec, user can override.
*/
int (*get_buffer2)(struct AVCodecContext *s, AVFrame *frame, int flags);
/**
* If non-zero, the decoded audio and video frames returned from
* avcodec_decode_video2() and avcodec_decode_audio4() are reference-counted
* and are valid indefinitely. The caller must free them with
* av_frame_unref() when they are not needed anymore.
* Otherwise, the decoded frames must not be freed by the caller and are
* only valid until the next decode call.
*
* - encoding: unused
* - decoding: set by the caller before avcodec_open2().
*/
int refcounted_frames;
/* - encoding parameters */
float qcompress; ///< amount of qscale change between easy & hard scenes (0.0-1.0)
float qblur; ///< amount of qscale smoothing over time (0.0-1.0)
/**
* minimum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmin;
/**
* maximum quantizer
* - encoding: Set by user.
* - decoding: unused
*/
int qmax;
/**
* maximum quantizer difference between frames
* - encoding: Set by user.
* - decoding: unused
*/
int max_qdiff;
/**
* ratecontrol qmin qmax limiting method
* 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
* - encoding: Set by user.
* - decoding: unused
*/
float rc_qsquish;
float rc_qmod_amp;
int rc_qmod_freq;
/**
* decoder bitstream buffer size
* - encoding: Set by user.
* - decoding: unused
*/
int rc_buffer_size;
/**
* ratecontrol override, see RcOverride
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
int rc_override_count;
RcOverride *rc_override;
/**
* rate control equation
* - encoding: Set by user
* - decoding: unused
*/
const char *rc_eq;
/**
* maximum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
int rc_max_rate;
/**
* minimum bitrate
* - encoding: Set by user.
* - decoding: unused
*/
int rc_min_rate;
float rc_buffer_aggressivity;
/**
* initial complexity for pass1 ratecontrol
* - encoding: Set by user.
* - decoding: unused
*/
float rc_initial_cplx;
/**
* Ratecontrol attempt to use, at maximum, <value> of what can be used without an underflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_max_available_vbv_use;
/**
* Ratecontrol attempt to use, at least, <value> times the amount needed to prevent a vbv overflow.
* - encoding: Set by user.
* - decoding: unused.
*/
float rc_min_vbv_overflow_use;
/**
* Number of bits which should be loaded into the rc buffer before decoding starts.
* - encoding: Set by user.
* - decoding: unused
*/
int rc_initial_buffer_occupancy;
#define FF_CODER_TYPE_VLC 0
#define FF_CODER_TYPE_AC 1
#define FF_CODER_TYPE_RAW 2
#define FF_CODER_TYPE_RLE 3
#define FF_CODER_TYPE_DEFLATE 4
/**
* coder type
* - encoding: Set by user.
* - decoding: unused
*/
int coder_type;
/**
* context model
* - encoding: Set by user.
* - decoding: unused
*/
int context_model;
/**
* minimum Lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int lmin;
/**
* maximum Lagrange multipler
* - encoding: Set by user.
* - decoding: unused
*/
int lmax;
/**
* frame skip threshold
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_threshold;
/**
* frame skip factor
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_factor;
/**
* frame skip exponent
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_exp;
/**
* frame skip comparison function
* - encoding: Set by user.
* - decoding: unused
*/
int frame_skip_cmp;
/**
* trellis RD quantization
* - encoding: Set by user.
* - decoding: unused
*/
int trellis;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int min_prediction_order;
/**
* - encoding: Set by user.
* - decoding: unused
*/
int max_prediction_order;
/**
* GOP timecode frame start number
* - encoding: Set by user, in non drop frame format
* - decoding: Set by libavcodec (timecode in the 25 bits format, -1 if unset)
*/
int64_t timecode_frame_start;
/* The RTP callback: This function is called */
/* every time the encoder has a packet to send. */
/* It depends on the encoder if the data starts */
/* with a Start Code (it should). H.263 does. */
/* mb_nb contains the number of macroblocks */
/* encoded in the RTP payload. */
void (*rtp_callback)(struct AVCodecContext *avctx, void *data, int size, int mb_nb);
int rtp_payload_size; /* The size of the RTP payload: the coder will */
/* do its best to deliver a chunk with size */
/* below rtp_payload_size, the chunk will start */
/* with a start code on some codecs like H.263. */
/* This doesn't take account of any particular */
/* headers inside the transmitted RTP payload. */
/* statistics, used for 2-pass encoding */
int mv_bits;
int header_bits;
int i_tex_bits;
int p_tex_bits;
int i_count;
int p_count;
int skip_count;
int misc_bits;
/**
* number of bits used for the previously encoded frame
* - encoding: Set by libavcodec.
* - decoding: unused
*/
int frame_bits;
/**
* pass1 encoding statistics output buffer
* - encoding: Set by libavcodec.
* - decoding: unused
*/
char *stats_out;
/**
* pass2 encoding statistics input buffer
* Concatenated stuff from stats_out of pass1 should be placed here.
* - encoding: Allocated/set/freed by user.
* - decoding: unused
*/
char *stats_in;
/**
* Work around bugs in encoders which sometimes cannot be detected automatically.
* - encoding: Set by user
* - decoding: Set by user
*/
int workaround_bugs;
#define FF_BUG_AUTODETECT 1 ///< autodetection
#if FF_API_OLD_MSMPEG4
#define FF_BUG_OLD_MSMPEG4 2
#endif
#define FF_BUG_XVID_ILACE 4
#define FF_BUG_UMP4 8
#define FF_BUG_NO_PADDING 16
#define FF_BUG_AMV 32
#if FF_API_AC_VLC
#define FF_BUG_AC_VLC 0 ///< Will be removed, libavcodec can now handle these non-compliant files by default.
#endif
#define FF_BUG_QPEL_CHROMA 64
#define FF_BUG_STD_QPEL 128
#define FF_BUG_QPEL_CHROMA2 256
#define FF_BUG_DIRECT_BLOCKSIZE 512
#define FF_BUG_EDGE 1024
#define FF_BUG_HPEL_CHROMA 2048
#define FF_BUG_DC_CLIP 4096
#define FF_BUG_MS 8192 ///< Work around various bugs in Microsoft's broken decoders.
#define FF_BUG_TRUNCATED 16384
/**
* strictly follow the standard (MPEG4, ...).
* - encoding: Set by user.
* - decoding: Set by user.
* Setting this to STRICT or higher means the encoder and decoder will
* generally do stupid things, whereas setting it to unofficial or lower
* will mean the encoder might produce output that is not supported by all
* spec-compliant decoders. Decoders don't differentiate between normal,
* unofficial and experimental (that is, they always try to decode things
* when they can) unless they are explicitly asked to behave stupidly
* (=strictly conform to the specs)
*/
int strict_std_compliance;
#define FF_COMPLIANCE_VERY_STRICT 2 ///< Strictly conform to an older more strict version of the spec or reference software.
#define FF_COMPLIANCE_STRICT 1 ///< Strictly conform to all the things in the spec no matter what consequences.
#define FF_COMPLIANCE_NORMAL 0
#define FF_COMPLIANCE_UNOFFICIAL -1 ///< Allow unofficial extensions
#define FF_COMPLIANCE_EXPERIMENTAL -2 ///< Allow nonstandardized experimental things.
/**
* error concealment flags
* - encoding: unused
* - decoding: Set by user.
*/
int error_concealment;
#define FF_EC_GUESS_MVS 1
#define FF_EC_DEBLOCK 2
/**
* debug
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug;
#define FF_DEBUG_PICT_INFO 1
#define FF_DEBUG_RC 2
#define FF_DEBUG_BITSTREAM 4
#define FF_DEBUG_MB_TYPE 8
#define FF_DEBUG_QP 16
#if FF_API_DEBUG_MV
/**
* @deprecated this option does nothing
*/
#define FF_DEBUG_MV 32
#endif
#define FF_DEBUG_DCT_COEFF 0x00000040
#define FF_DEBUG_SKIP 0x00000080
#define FF_DEBUG_STARTCODE 0x00000100
#define FF_DEBUG_PTS 0x00000200
#define FF_DEBUG_ER 0x00000400
#define FF_DEBUG_MMCO 0x00000800
#define FF_DEBUG_BUGS 0x00001000
#if FF_API_DEBUG_MV
#define FF_DEBUG_VIS_QP 0x00002000 ///< only access through AVOptions from outside libavcodec
#define FF_DEBUG_VIS_MB_TYPE 0x00004000 ///< only access through AVOptions from outside libavcodec
#endif
#define FF_DEBUG_BUFFERS 0x00008000
#define FF_DEBUG_THREADS 0x00010000
#if FF_API_DEBUG_MV
/**
* debug
* Code outside libavcodec should access this field using AVOptions
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
#endif
/**
* Error recognition; may misdetect some more or less valid parts as errors.
* - encoding: unused
* - decoding: Set by user.
*/
int err_recognition;
/**
* Verify checksums embedded in the bitstream (could be of either encoded or
* decoded data, depending on the codec) and print an error message on mismatch.
* If AV_EF_EXPLODE is also set, a mismatching checksum will result in the
* decoder returning an error.
*/
#define AV_EF_CRCCHECK (1<<0)
#define AV_EF_BITSTREAM (1<<1) ///< detect bitstream specification deviations
#define AV_EF_BUFFER (1<<2) ///< detect improper bitstream length
#define AV_EF_EXPLODE (1<<3) ///< abort decoding on minor error detection
#define AV_EF_CAREFUL (1<<16) ///< consider things that violate the spec, are fast to calculate and have not been seen in the wild as errors
#define AV_EF_COMPLIANT (1<<17) ///< consider all spec non compliancies as errors
#define AV_EF_AGGRESSIVE (1<<18) ///< consider things that a sane encoder should not do as an error
/**
* opaque 64bit number (generally a PTS) that will be reordered and
* output in AVFrame.reordered_opaque
* @deprecated in favor of pkt_pts
* - encoding: unused
* - decoding: Set by user.
*/
int64_t reordered_opaque;
/**
* Hardware accelerator in use
* - encoding: unused.
* - decoding: Set by libavcodec
*/
struct AVHWAccel *hwaccel;
/**
* Hardware accelerator context.
* For some hardware accelerators, a global context needs to be
* provided by the user. In that case, this holds display-dependent
* data FFmpeg cannot instantiate itself. Please refer to the
* FFmpeg HW accelerator documentation to know how to fill this
* is. e.g. for VA API, this is a struct vaapi_context.
* - encoding: unused
* - decoding: Set by user
*/
void *hwaccel_context;
/**
* error
* - encoding: Set by libavcodec if flags&CODEC_FLAG_PSNR.
* - decoding: unused
*/
uint64_t error[AV_NUM_DATA_POINTERS];
/**
* DCT algorithm, see FF_DCT_* below
* - encoding: Set by user.
* - decoding: unused
*/
int dct_algo;
#define FF_DCT_AUTO 0
#define FF_DCT_FASTINT 1
#define FF_DCT_INT 2
#define FF_DCT_MMX 3
#define FF_DCT_ALTIVEC 5
#define FF_DCT_FAAN 6
/**
* IDCT algorithm, see FF_IDCT_* below.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int idct_algo;
#define FF_IDCT_AUTO 0
#define FF_IDCT_INT 1
#define FF_IDCT_SIMPLE 2
#define FF_IDCT_SIMPLEMMX 3
#define FF_IDCT_ARM 7
#define FF_IDCT_ALTIVEC 8
#define FF_IDCT_SH4 9
#define FF_IDCT_SIMPLEARM 10
#define FF_IDCT_IPP 13
#define FF_IDCT_XVIDMMX 14
#define FF_IDCT_SIMPLEARMV5TE 16
#define FF_IDCT_SIMPLEARMV6 17
#define FF_IDCT_SIMPLEVIS 18
#define FF_IDCT_FAAN 20
#define FF_IDCT_SIMPLENEON 22
#if FF_API_ARCH_ALPHA
#define FF_IDCT_SIMPLEALPHA 23
#endif
/**
* bits per sample/pixel from the demuxer (needed for huffyuv).
* - encoding: Set by libavcodec.
* - decoding: Set by user.
*/
int bits_per_coded_sample;
/**
* Bits per sample/pixel of internal libavcodec pixel/sample format.
* - encoding: set by user.
* - decoding: set by libavcodec.
*/
int bits_per_raw_sample;
#if FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_lowres(avctx)
*/
int lowres;
#endif
/**
* the picture in the bitstream
* - encoding: Set by libavcodec.
* - decoding: unused
*/
AVFrame *coded_frame;
/**
* thread count
* is used to decide how many independent tasks should be passed to execute()
* - encoding: Set by user.
* - decoding: Set by user.
*/
int thread_count;
/**
* Which multithreading methods to use.
* Use of FF_THREAD_FRAME will increase decoding delay by one frame per thread,
* so clients which cannot provide future frames should not use it.
*
* - encoding: Set by user, otherwise the default is used.
* - decoding: Set by user, otherwise the default is used.
*/
int thread_type;
#define FF_THREAD_FRAME 1 ///< Decode more than one frame at once
#define FF_THREAD_SLICE 2 ///< Decode more than one part of a single frame at once
/**
* Which multithreading methods are in use by the codec.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*/
int active_thread_type;
/**
* Set by the client if its custom get_buffer() callback can be called
* synchronously from another thread, which allows faster multithreaded decoding.
* draw_horiz_band() will be called from other threads regardless of this setting.
* Ignored if the default get_buffer() is used.
* - encoding: Set by user.
* - decoding: Set by user.
*/
int thread_safe_callbacks;
/**
* The codec may call this to execute several independent things.
* It will return only after finishing all tasks.
* The user may replace this with some multithreaded implementation,
* the default implementation will execute the parts serially.
* @param count the number of things to execute
* - encoding: Set by libavcodec, user can override.
* - decoding: Set by libavcodec, user can override.
*/
int (*execute)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg), void *arg2, int *ret, int count, int size);
/**
* The codec may call this to execute several independent things.
* It will return only after finishing all tasks.
* The user may replace this with some multithreaded implementation,
* the default implementation will execute the parts serially.
* Also see avcodec_thread_init and e.g. the --enable-pthread configure option.
* @param c context passed also to func
* @param count the number of things to execute
* @param arg2 argument passed unchanged to func
* @param ret return values of executed functions, must have space for "count" values. May be NULL.
* @param func function that will be called count times, with jobnr from 0 to count-1.
* threadnr will be in the range 0 to c->thread_count-1 < MAX_THREADS and so that no
* two instances of func executing at the same time will have the same threadnr.
* @return always 0 currently, but code should handle a future improvement where when any call to func
* returns < 0 no further calls to func may be done and < 0 is returned.
* - encoding: Set by libavcodec, user can override.
* - decoding: Set by libavcodec, user can override.
*/
int (*execute2)(struct AVCodecContext *c, int (*func)(struct AVCodecContext *c2, void *arg, int jobnr, int threadnr), void *arg2, int *ret, int count);
#if FF_API_THREAD_OPAQUE
/**
* @deprecated this field should not be used from outside of lavc
*/
attribute_deprecated
void *thread_opaque;
#endif
/**
* noise vs. sse weight for the nsse comparsion function
* - encoding: Set by user.
* - decoding: unused
*/
int nsse_weight;
/**
* profile
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int profile;
#define FF_PROFILE_UNKNOWN -99
#define FF_PROFILE_RESERVED -100
#define FF_PROFILE_AAC_MAIN 0
#define FF_PROFILE_AAC_LOW 1
#define FF_PROFILE_AAC_SSR 2
#define FF_PROFILE_AAC_LTP 3
#define FF_PROFILE_AAC_HE 4
#define FF_PROFILE_AAC_HE_V2 28
#define FF_PROFILE_AAC_LD 22
#define FF_PROFILE_AAC_ELD 38
#define FF_PROFILE_MPEG2_AAC_LOW 128
#define FF_PROFILE_MPEG2_AAC_HE 131
#define FF_PROFILE_DTS 20
#define FF_PROFILE_DTS_ES 30
#define FF_PROFILE_DTS_96_24 40
#define FF_PROFILE_DTS_HD_HRA 50
#define FF_PROFILE_DTS_HD_MA 60
#define FF_PROFILE_MPEG2_422 0
#define FF_PROFILE_MPEG2_HIGH 1
#define FF_PROFILE_MPEG2_SS 2
#define FF_PROFILE_MPEG2_SNR_SCALABLE 3
#define FF_PROFILE_MPEG2_MAIN 4
#define FF_PROFILE_MPEG2_SIMPLE 5
#define FF_PROFILE_H264_CONSTRAINED (1<<9) // 8+1; constraint_set1_flag
#define FF_PROFILE_H264_INTRA (1<<11) // 8+3; constraint_set3_flag
#define FF_PROFILE_H264_BASELINE 66
#define FF_PROFILE_H264_CONSTRAINED_BASELINE (66|FF_PROFILE_H264_CONSTRAINED)
#define FF_PROFILE_H264_MAIN 77
#define FF_PROFILE_H264_EXTENDED 88
#define FF_PROFILE_H264_HIGH 100
#define FF_PROFILE_H264_HIGH_10 110
#define FF_PROFILE_H264_HIGH_10_INTRA (110|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_HIGH_422 122
#define FF_PROFILE_H264_HIGH_422_INTRA (122|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_HIGH_444 144
#define FF_PROFILE_H264_HIGH_444_PREDICTIVE 244
#define FF_PROFILE_H264_HIGH_444_INTRA (244|FF_PROFILE_H264_INTRA)
#define FF_PROFILE_H264_CAVLC_444 44
#define FF_PROFILE_VC1_SIMPLE 0
#define FF_PROFILE_VC1_MAIN 1
#define FF_PROFILE_VC1_COMPLEX 2
#define FF_PROFILE_VC1_ADVANCED 3
#define FF_PROFILE_MPEG4_SIMPLE 0
#define FF_PROFILE_MPEG4_SIMPLE_SCALABLE 1
#define FF_PROFILE_MPEG4_CORE 2
#define FF_PROFILE_MPEG4_MAIN 3
#define FF_PROFILE_MPEG4_N_BIT 4
#define FF_PROFILE_MPEG4_SCALABLE_TEXTURE 5
#define FF_PROFILE_MPEG4_SIMPLE_FACE_ANIMATION 6
#define FF_PROFILE_MPEG4_BASIC_ANIMATED_TEXTURE 7
#define FF_PROFILE_MPEG4_HYBRID 8
#define FF_PROFILE_MPEG4_ADVANCED_REAL_TIME 9
#define FF_PROFILE_MPEG4_CORE_SCALABLE 10
#define FF_PROFILE_MPEG4_ADVANCED_CODING 11
#define FF_PROFILE_MPEG4_ADVANCED_CORE 12
#define FF_PROFILE_MPEG4_ADVANCED_SCALABLE_TEXTURE 13
#define FF_PROFILE_MPEG4_SIMPLE_STUDIO 14
#define FF_PROFILE_MPEG4_ADVANCED_SIMPLE 15
#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_0 0
#define FF_PROFILE_JPEG2000_CSTREAM_RESTRICTION_1 1
#define FF_PROFILE_JPEG2000_CSTREAM_NO_RESTRICTION 2
#define FF_PROFILE_JPEG2000_DCINEMA_2K 3
#define FF_PROFILE_JPEG2000_DCINEMA_4K 4
#define FF_PROFILE_HEVC_MAIN 1
#define FF_PROFILE_HEVC_MAIN_10 2
#define FF_PROFILE_HEVC_MAIN_STILL_PICTURE 3
/**
* level
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
int level;
#define FF_LEVEL_UNKNOWN -99
/**
* Skip loop filtering for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_loop_filter;
/**
* Skip IDCT/dequantization for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_idct;
/**
* Skip decoding for selected frames.
* - encoding: unused
* - decoding: Set by user.
*/
enum AVDiscard skip_frame;
/**
* Header containing style information for text subtitles.
* For SUBTITLE_ASS subtitle type, it should contain the whole ASS
* [Script Info] and [V4+ Styles] section, plus the [Events] line and
* the Format line following. It shouldn't include any Dialogue line.
* - encoding: Set/allocated/freed by user (before avcodec_open2())
* - decoding: Set/allocated/freed by libavcodec (by avcodec_open2())
*/
uint8_t *subtitle_header;
int subtitle_header_size;
#if FF_API_ERROR_RATE
/**
* @deprecated use the 'error_rate' private AVOption of the mpegvideo
* encoders
*/
attribute_deprecated
int error_rate;
#endif
#if FF_API_CODEC_PKT
/**
* @deprecated this field is not supposed to be accessed from outside lavc
*/
attribute_deprecated
AVPacket *pkt;
#endif
/**
* VBV delay coded in the last frame (in periods of a 27 MHz clock).
* Used for compliant TS muxing.
* - encoding: Set by libavcodec.
* - decoding: unused.
*/
uint64_t vbv_delay;
/**
* Timebase in which pkt_dts/pts and AVPacket.dts/pts are.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_pkt_timebase(avctx)
* - encoding unused.
* - decoding set by user.
*/
AVRational pkt_timebase;
/**
* AVCodecDescriptor
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_codec_descriptor(avctx)
* - encoding: unused.
* - decoding: set by libavcodec.
*/
const AVCodecDescriptor *codec_descriptor;
#if !FF_API_LOWRES
/**
* low resolution decoding, 1-> 1/2 size, 2->1/4 size
* - encoding: unused
* - decoding: Set by user.
* Code outside libavcodec should access this field using:
* av_codec_{get,set}_lowres(avctx)
*/
int lowres;
#endif
/**
* Current statistics for PTS correction.
* - decoding: maintained and used by libavcodec, not intended to be used by user apps
* - encoding: unused
*/
int64_t pts_correction_num_faulty_pts; /// Number of incorrect PTS values so far
int64_t pts_correction_num_faulty_dts; /// Number of incorrect DTS values so far
int64_t pts_correction_last_pts; /// PTS of the last frame
int64_t pts_correction_last_dts; /// DTS of the last frame
/**
* Character encoding of the input subtitles file.
* - decoding: set by user
* - encoding: unused
*/
char *sub_charenc;
/**
* Subtitles character encoding mode. Formats or codecs might be adjusting
* this setting (if they are doing the conversion themselves for instance).
* - decoding: set by libavcodec
* - encoding: unused
*/
int sub_charenc_mode;
#define FF_SUB_CHARENC_MODE_DO_NOTHING -1 ///< do nothing (demuxer outputs a stream supposed to be already in UTF-8, or the codec is bitmap for instance)
#define FF_SUB_CHARENC_MODE_AUTOMATIC 0 ///< libavcodec will select the mode itself
#define FF_SUB_CHARENC_MODE_PRE_DECODER 1 ///< the AVPacket data needs to be recoded to UTF-8 before being fed to the decoder, requires iconv
/**
* Skip processing alpha if supported by codec.
* Note that if the format uses pre-multiplied alpha (common with VP6,
* and recommended due to better video quality/compression)
* the image will look as if alpha-blended onto a black background.
* However for formats that do not use pre-multiplied alpha
* there might be serious artefacts (though e.g. libswscale currently
* assumes pre-multiplied alpha anyway).
* Code outside libavcodec should access this field using AVOptions
*
* - decoding: set by user
* - encoding: unused
*/
int skip_alpha;
/**
* Number of samples to skip after a discontinuity
* - decoding: unused
* - encoding: set by libavcodec
*/
int seek_preroll;
#if !FF_API_DEBUG_MV
/**
* debug motion vectors
* Code outside libavcodec should access this field using AVOptions
* - encoding: Set by user.
* - decoding: Set by user.
*/
int debug_mv;
#define FF_DEBUG_VIS_MV_P_FOR 0x00000001 //visualize forward predicted MVs of P frames
#define FF_DEBUG_VIS_MV_B_FOR 0x00000002 //visualize forward predicted MVs of B frames
#define FF_DEBUG_VIS_MV_B_BACK 0x00000004 //visualize backward predicted MVs of B frames
#endif
/**
* custom intra quantization matrix
* Code outside libavcodec should access this field using av_codec_g/set_chroma_intra_matrix()
* - encoding: Set by user, can be NULL.
* - decoding: unused.
*/
uint16_t *chroma_intra_matrix;
} AVCodecContext;
AVRational av_codec_get_pkt_timebase (const AVCodecContext *avctx);
void av_codec_set_pkt_timebase (AVCodecContext *avctx, AVRational val);
const AVCodecDescriptor *av_codec_get_codec_descriptor(const AVCodecContext *avctx);
void av_codec_set_codec_descriptor(AVCodecContext *avctx, const AVCodecDescriptor *desc);
int av_codec_get_lowres(const AVCodecContext *avctx);
void av_codec_set_lowres(AVCodecContext *avctx, int val);
int av_codec_get_seek_preroll(const AVCodecContext *avctx);
void av_codec_set_seek_preroll(AVCodecContext *avctx, int val);
uint16_t *av_codec_get_chroma_intra_matrix(const AVCodecContext *avctx);
void av_codec_set_chroma_intra_matrix(AVCodecContext *avctx, uint16_t *val);
/**
* AVProfile.
*/
typedef struct AVProfile {
int profile;
const char *name; ///< short name for the profile
} AVProfile;
typedef struct AVCodecDefault AVCodecDefault;
struct AVSubtitle;
/**
* AVCodec.
*/
typedef struct AVCodec {
/**
* Name of the codec implementation.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
* This is the primary way to find a codec from the user perspective.
*/
const char *name;
/**
* Descriptive name for the codec, meant to be more human readable than name.
* You should use the NULL_IF_CONFIG_SMALL() macro to define it.
*/
const char *long_name;
enum AVMediaType type;
enum AVCodecID id;
/**
* Codec capabilities.
* see CODEC_CAP_*
*/
int capabilities;
const AVRational *supported_framerates; ///< array of supported framerates, or NULL if any, array is terminated by {0,0}
const enum AVPixelFormat *pix_fmts; ///< array of supported pixel formats, or NULL if unknown, array is terminated by -1
const int *supported_samplerates; ///< array of supported audio samplerates, or NULL if unknown, array is terminated by 0
const enum AVSampleFormat *sample_fmts; ///< array of supported sample formats, or NULL if unknown, array is terminated by -1
const uint64_t *channel_layouts; ///< array of support channel layouts, or NULL if unknown. array is terminated by 0
#if FF_API_LOWRES
uint8_t max_lowres; ///< maximum value for lowres supported by the decoder, no direct access, use av_codec_get_max_lowres()
#endif
const AVClass *priv_class; ///< AVClass for the private context
const AVProfile *profiles; ///< array of recognized profiles, or NULL if unknown, array is terminated by {FF_PROFILE_UNKNOWN}
/*****************************************************************
* No fields below this line are part of the public API. They
* may not be used outside of libavcodec and can be changed and
* removed at will.
* New public fields should be added right above.
*****************************************************************
*/
int priv_data_size;
struct AVCodec *next;
/**
* @name Frame-level threading support functions
* @{
*/
/**
* If defined, called on thread contexts when they are created.
* If the codec allocates writable tables in init(), re-allocate them here.
* priv_data will be set to a copy of the original.
*/
int (*init_thread_copy)(AVCodecContext *);
/**
* Copy necessary context variables from a previous thread context to the current one.
* If not defined, the next thread will start automatically; otherwise, the codec
* must call ff_thread_finish_setup().
*
* dst and src will (rarely) point to the same context, in which case memcpy should be skipped.
*/
int (*update_thread_context)(AVCodecContext *dst, const AVCodecContext *src);
/** @} */
/**
* Private codec-specific defaults.
*/
const AVCodecDefault *defaults;
/**
* Initialize codec static data, called from avcodec_register().
*/
void (*init_static_data)(struct AVCodec *codec);
int (*init)(AVCodecContext *);
int (*encode_sub)(AVCodecContext *, uint8_t *buf, int buf_size,
const struct AVSubtitle *sub);
/**
* Encode data to an AVPacket.
*
* @param avctx codec context
* @param avpkt output AVPacket (may contain a user-provided buffer)
* @param[in] frame AVFrame containing the raw data to be encoded
* @param[out] got_packet_ptr encoder sets to 0 or 1 to indicate that a
* non-empty packet was returned in avpkt.
* @return 0 on success, negative error code on failure
*/
int (*encode2)(AVCodecContext *avctx, AVPacket *avpkt, const AVFrame *frame,
int *got_packet_ptr);
int (*decode)(AVCodecContext *, void *outdata, int *outdata_size, AVPacket *avpkt);
int (*close)(AVCodecContext *);
/**
* Flush buffers.
* Will be called when seeking
*/
void (*flush)(AVCodecContext *);
} AVCodec;
int av_codec_get_max_lowres(const AVCodec *codec);
struct MpegEncContext;
/**
* AVHWAccel.
*/
typedef struct AVHWAccel {
/**
* Name of the hardware accelerated codec.
* The name is globally unique among encoders and among decoders (but an
* encoder and a decoder can share the same name).
*/
const char *name;
/**
* Type of codec implemented by the hardware accelerator.
*
* See AVMEDIA_TYPE_xxx
*/
enum AVMediaType type;
/**
* Codec implemented by the hardware accelerator.
*
* See AV_CODEC_ID_xxx
*/
enum AVCodecID id;
/**
* Supported pixel format.
*
* Only hardware accelerated formats are supported here.
*/
enum AVPixelFormat pix_fmt;
/**
* Hardware accelerated codec capabilities.
* see FF_HWACCEL_CODEC_CAP_*
*/
int capabilities;
struct AVHWAccel *next;
/**
* Called at the beginning of each frame or field picture.
*
* Meaningful frame information (codec specific) is guaranteed to
* be parsed at this point. This function is mandatory.
*
* Note that buf can be NULL along with buf_size set to 0.
* Otherwise, this means the whole frame is available at this point.
*
* @param avctx the codec context
* @param buf the frame data buffer base
* @param buf_size the size of the frame in bytes
* @return zero if successful, a negative value otherwise
*/
int (*start_frame)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
/**
* Callback for each slice.
*
* Meaningful slice information (codec specific) is guaranteed to
* be parsed at this point. This function is mandatory.
* The only exception is XvMC, that works on MB level.
*
* @param avctx the codec context
* @param buf the slice data buffer base
* @param buf_size the size of the slice in bytes
* @return zero if successful, a negative value otherwise
*/
int (*decode_slice)(AVCodecContext *avctx, const uint8_t *buf, uint32_t buf_size);
/**
* Called at the end of each frame or field picture.
*
* The whole picture is parsed at this point and can now be sent
* to the hardware accelerator. This function is mandatory.
*
* @param avctx the codec context
* @return zero if successful, a negative value otherwise
*/
int (*end_frame)(AVCodecContext *avctx);
/**
* Size of HW accelerator private data.
*
* Private data is allocated with av_mallocz() before
* AVCodecContext.get_buffer() and deallocated after
* AVCodecContext.release_buffer().
*/
int priv_data_size;
/**
* Called for every Macroblock in a slice.
*
* XvMC uses it to replace the ff_MPV_decode_mb().
* Instead of decoding to raw picture, MB parameters are
* stored in an array provided by the video driver.
*
* @param s the mpeg context
*/
void (*decode_mb)(struct MpegEncContext *s);
} AVHWAccel;
/**
* @defgroup lavc_picture AVPicture
*
* Functions for working with AVPicture
* @{
*/
/**
* Picture data structure.
*
* Up to four components can be stored into it, the last component is
* alpha.
*/
typedef struct AVPicture {
uint8_t *data[AV_NUM_DATA_POINTERS]; ///< pointers to the image data planes
int linesize[AV_NUM_DATA_POINTERS]; ///< number of bytes per line
} AVPicture;
/**
* @}
*/
enum AVSubtitleType {
SUBTITLE_NONE,
SUBTITLE_BITMAP, ///< A bitmap, pict will be set
/**
* Plain text, the text field must be set by the decoder and is
* authoritative. ass and pict fields may contain approximations.
*/
SUBTITLE_TEXT,
/**
* Formatted text, the ass field must be set by the decoder and is
* authoritative. pict and text fields may contain approximations.
*/
SUBTITLE_ASS,
};
#define AV_SUBTITLE_FLAG_FORCED 0x00000001
typedef struct AVSubtitleRect {
int x; ///< top left corner of pict, undefined when pict is not set
int y; ///< top left corner of pict, undefined when pict is not set
int w; ///< width of pict, undefined when pict is not set
int h; ///< height of pict, undefined when pict is not set
int nb_colors; ///< number of colors in pict, undefined when pict is not set
/**
* data+linesize for the bitmap of this subtitle.
* can be set for text/ass as well once they where rendered
*/
AVPicture pict;
enum AVSubtitleType type;
char *text; ///< 0 terminated plain UTF-8 text
/**
* 0 terminated ASS/SSA compatible event line.
* The presentation of this is unaffected by the other values in this
* struct.
*/
char *ass;
int flags;
} AVSubtitleRect;
typedef struct AVSubtitle {
uint16_t format; /* 0 = graphics */
uint32_t start_display_time; /* relative to packet pts, in ms */
uint32_t end_display_time; /* relative to packet pts, in ms */
unsigned num_rects;
AVSubtitleRect **rects;
int64_t pts; ///< Same as packet pts, in AV_TIME_BASE
} AVSubtitle;
/**
* If c is NULL, returns the first registered codec,
* if c is non-NULL, returns the next registered codec after c,
* or NULL if c is the last one.
*/
AVCodec *av_codec_next(const AVCodec *c);
/**
* Return the LIBAVCODEC_VERSION_INT constant.
*/
unsigned avcodec_version(void);
/**
* Return the libavcodec build-time configuration.
*/
const char *avcodec_configuration(void);
/**
* Return the libavcodec license.
*/
const char *avcodec_license(void);
/**
* Register the codec codec and initialize libavcodec.
*
* @warning either this function or avcodec_register_all() must be called
* before any other libavcodec functions.
*
* @see avcodec_register_all()
*/
void avcodec_register(AVCodec *codec);
/**
* Register all the codecs, parsers and bitstream filters which were enabled at
* configuration time. If you do not call this function you can select exactly
* which formats you want to support, by using the individual registration
* functions.
*
* @see avcodec_register
* @see av_register_codec_parser
* @see av_register_bitstream_filter
*/
void avcodec_register_all(void);
/**
* Allocate an AVCodecContext and set its fields to default values. The
* resulting struct can be deallocated by calling avcodec_close() on it followed
* by av_free().
*
* @param codec if non-NULL, allocate private data and initialize defaults
* for the given codec. It is illegal to then call avcodec_open2()
* with a different codec.
* If NULL, then the codec-specific defaults won't be initialized,
* which may result in suboptimal default settings (this is
* important mainly for encoders, e.g. libx264).
*
* @return An AVCodecContext filled with default values or NULL on failure.
* @see avcodec_get_context_defaults
*/
AVCodecContext *avcodec_alloc_context3(const AVCodec *codec);
/**
* Set the fields of the given AVCodecContext to default values corresponding
* to the given codec (defaults may be codec-dependent).
*
* Do not call this function if a non-NULL codec has been passed
* to avcodec_alloc_context3() that allocated this AVCodecContext.
* If codec is non-NULL, it is illegal to call avcodec_open2() with a
* different codec on this AVCodecContext.
*/
int avcodec_get_context_defaults3(AVCodecContext *s, const AVCodec *codec);
/**
* Get the AVClass for AVCodecContext. It can be used in combination with
* AV_OPT_SEARCH_FAKE_OBJ for examining options.
*
* @see av_opt_find().
*/
const AVClass *avcodec_get_class(void);
/**
* Get the AVClass for AVFrame. It can be used in combination with
* AV_OPT_SEARCH_FAKE_OBJ for examining options.
*
* @see av_opt_find().
*/
const AVClass *avcodec_get_frame_class(void);
/**
* Get the AVClass for AVSubtitleRect. It can be used in combination with
* AV_OPT_SEARCH_FAKE_OBJ for examining options.
*
* @see av_opt_find().
*/
const AVClass *avcodec_get_subtitle_rect_class(void);
/**
* Copy the settings of the source AVCodecContext into the destination
* AVCodecContext. The resulting destination codec context will be
* unopened, i.e. you are required to call avcodec_open2() before you
* can use this AVCodecContext to decode/encode video/audio data.
*
* @param dest target codec context, should be initialized with
* avcodec_alloc_context3(NULL), but otherwise uninitialized
* @param src source codec context
* @return AVERROR() on error (e.g. memory allocation error), 0 on success
*/
int avcodec_copy_context(AVCodecContext *dest, const AVCodecContext *src);
#if FF_API_AVFRAME_LAVC
/**
* @deprecated use av_frame_alloc()
*/
attribute_deprecated
AVFrame *avcodec_alloc_frame(void);
/**
* Set the fields of the given AVFrame to default values.
*
* @param frame The AVFrame of which the fields should be set to default values.
*
* @deprecated use av_frame_unref()
*/
attribute_deprecated
void avcodec_get_frame_defaults(AVFrame *frame);
/**
* Free the frame and any dynamically allocated objects in it,
* e.g. extended_data.
*
* @param frame frame to be freed. The pointer will be set to NULL.
*
* @warning this function does NOT free the data buffers themselves
* (it does not know how, since they might have been allocated with
* a custom get_buffer()).
*
* @deprecated use av_frame_free()
*/
attribute_deprecated
void avcodec_free_frame(AVFrame **frame);
#endif
/**
* Initialize the AVCodecContext to use the given AVCodec. Prior to using this
* function the context has to be allocated with avcodec_alloc_context3().
*
* The functions avcodec_find_decoder_by_name(), avcodec_find_encoder_by_name(),
* avcodec_find_decoder() and avcodec_find_encoder() provide an easy way for
* retrieving a codec.
*
* @warning This function is not thread safe!
*
* @code
* avcodec_register_all();
* av_dict_set(&opts, "b", "2.5M", 0);
* codec = avcodec_find_decoder(AV_CODEC_ID_H264);
* if (!codec)
* exit(1);
*
* context = avcodec_alloc_context3(codec);
*
* if (avcodec_open2(context, codec, opts) < 0)
* exit(1);
* @endcode
*
* @param avctx The context to initialize.
* @param codec The codec to open this context for. If a non-NULL codec has been
* previously passed to avcodec_alloc_context3() or
* avcodec_get_context_defaults3() for this context, then this
* parameter MUST be either NULL or equal to the previously passed
* codec.
* @param options A dictionary filled with AVCodecContext and codec-private options.
* On return this object will be filled with options that were not found.
*
* @return zero on success, a negative value on error
* @see avcodec_alloc_context3(), avcodec_find_decoder(), avcodec_find_encoder(),
* av_dict_set(), av_opt_find().
*/
int avcodec_open2(AVCodecContext *avctx, const AVCodec *codec, AVDictionary **options);
/**
* Close a given AVCodecContext and free all the data associated with it
* (but not the AVCodecContext itself).
*
* Calling this function on an AVCodecContext that hasn't been opened will free
* the codec-specific data allocated in avcodec_alloc_context3() /
* avcodec_get_context_defaults3() with a non-NULL codec. Subsequent calls will
* do nothing.
*/
int avcodec_close(AVCodecContext *avctx);
/**
* Free all allocated data in the given subtitle struct.
*
* @param sub AVSubtitle to free.
*/
void avsubtitle_free(AVSubtitle *sub);
/**
* @}
*/
/**
* @addtogroup lavc_packet
* @{
*/
#if FF_API_DESTRUCT_PACKET
/**
* Default packet destructor.
* @deprecated use the AVBuffer API instead
*/
attribute_deprecated
void av_destruct_packet(AVPacket *pkt);
#endif
/**
* Initialize optional fields of a packet with default values.
*
* Note, this does not touch the data and size members, which have to be
* initialized separately.
*
* @param pkt packet
*/
void av_init_packet(AVPacket *pkt);
/**
* Allocate the payload of a packet and initialize its fields with
* default values.
*
* @param pkt packet
* @param size wanted payload size
* @return 0 if OK, AVERROR_xxx otherwise
*/
int av_new_packet(AVPacket *pkt, int size);
/**
* Reduce packet size, correctly zeroing padding
*
* @param pkt packet
* @param size new size
*/
void av_shrink_packet(AVPacket *pkt, int size);
/**
* Increase packet size, correctly zeroing padding
*
* @param pkt packet
* @param grow_by number of bytes by which to increase the size of the packet
*/
int av_grow_packet(AVPacket *pkt, int grow_by);
/**
* Initialize a reference-counted packet from av_malloc()ed data.
*
* @param pkt packet to be initialized. This function will set the data, size,
* buf and destruct fields, all others are left untouched.
* @param data Data allocated by av_malloc() to be used as packet data. If this
* function returns successfully, the data is owned by the underlying AVBuffer.
* The caller may not access the data through other means.
* @param size size of data in bytes, without the padding. I.e. the full buffer
* size is assumed to be size + FF_INPUT_BUFFER_PADDING_SIZE.
*
* @return 0 on success, a negative AVERROR on error
*/
int av_packet_from_data(AVPacket *pkt, uint8_t *data, int size);
/**
* @warning This is a hack - the packet memory allocation stuff is broken. The
* packet is allocated if it was not really allocated.
*/
int av_dup_packet(AVPacket *pkt);
/**
* Copy packet, including contents
*
* @return 0 on success, negative AVERROR on fail
*/
int av_copy_packet(AVPacket *dst, AVPacket *src);
/**
* Copy packet side data
*
* @return 0 on success, negative AVERROR on fail
*/
int av_copy_packet_side_data(AVPacket *dst, AVPacket *src);
/**
* Free a packet.
*
* @param pkt packet to free
*/
void av_free_packet(AVPacket *pkt);
/**
* Allocate new information of a packet.
*
* @param pkt packet
* @param type side information type
* @param size side information size
* @return pointer to fresh allocated data or NULL otherwise
*/
uint8_t* av_packet_new_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int size);
/**
* Shrink the already allocated side data buffer
*
* @param pkt packet
* @param type side information type
* @param size new side information size
* @return 0 on success, < 0 on failure
*/
int av_packet_shrink_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int size);
/**
* Get side information from packet.
*
* @param pkt packet
* @param type desired side information type
* @param size pointer for side information size to store (optional)
* @return pointer to data if present or NULL otherwise
*/
uint8_t* av_packet_get_side_data(AVPacket *pkt, enum AVPacketSideDataType type,
int *size);
int av_packet_merge_side_data(AVPacket *pkt);
int av_packet_split_side_data(AVPacket *pkt);
/**
* Pack a dictionary for use in side_data.
*
* @param dict The dictionary to pack.
* @param size pointer to store the size of the returned data
* @return pointer to data if successful, NULL otherwise
*/
uint8_t *av_packet_pack_dictionary(AVDictionary *dict, int *size);
/**
* Unpack a dictionary from side_data.
*
* @param data data from side_data
* @param size size of the data
* @param dict the metadata storage dictionary
* @return 0 on success, < 0 on failure
*/
int av_packet_unpack_dictionary(const uint8_t *data, int size, AVDictionary **dict);
/**
* Convenience function to free all the side data stored.
* All the other fields stay untouched.
*
* @param pkt packet
*/
void av_packet_free_side_data(AVPacket *pkt);
/**
* Setup a new reference to the data described by a given packet
*
* If src is reference-counted, setup dst as a new reference to the
* buffer in src. Otherwise allocate a new buffer in dst and copy the
* data from src into it.
*
* All the other fields are copied from src.
*
* @see av_packet_unref
*
* @param dst Destination packet
* @param src Source packet
*
* @return 0 on success, a negative AVERROR on error.
*/
int av_packet_ref(AVPacket *dst, AVPacket *src);
/**
* Wipe the packet.
*
* Unreference the buffer referenced by the packet and reset the
* remaining packet fields to their default values.
*
* @param pkt The packet to be unreferenced.
*/
void av_packet_unref(AVPacket *pkt);
/**
* Move every field in src to dst and reset src.
*
* @see av_packet_unref
*
* @param src Source packet, will be reset
* @param dst Destination packet
*/
void av_packet_move_ref(AVPacket *dst, AVPacket *src);
/**
* Copy only "properties" fields from src to dst.
*
* Properties for the purpose of this function are all the fields
* beside those related to the packet data (buf, data, size)
*
* @param dst Destination packet
* @param src Source packet
*
* @return 0 on success AVERROR on failure.
*
*/
int av_packet_copy_props(AVPacket *dst, const AVPacket *src);
/**
* @}
*/
/**
* @addtogroup lavc_decoding
* @{
*/
/**
* Find a registered decoder with a matching codec ID.
*
* @param id AVCodecID of the requested decoder
* @return A decoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_decoder(enum AVCodecID id);
/**
* Find a registered decoder with the specified name.
*
* @param name name of the requested decoder
* @return A decoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_decoder_by_name(const char *name);
#if FF_API_GET_BUFFER
attribute_deprecated int avcodec_default_get_buffer(AVCodecContext *s, AVFrame *pic);
attribute_deprecated void avcodec_default_release_buffer(AVCodecContext *s, AVFrame *pic);
attribute_deprecated int avcodec_default_reget_buffer(AVCodecContext *s, AVFrame *pic);
#endif
/**
* The default callback for AVCodecContext.get_buffer2(). It is made public so
* it can be called by custom get_buffer2() implementations for decoders without
* CODEC_CAP_DR1 set.
*/
int avcodec_default_get_buffer2(AVCodecContext *s, AVFrame *frame, int flags);
#if FF_API_EMU_EDGE
/**
* Return the amount of padding in pixels which the get_buffer callback must
* provide around the edge of the image for codecs which do not have the
* CODEC_FLAG_EMU_EDGE flag.
*
* @return Required padding in pixels.
*
* @deprecated CODEC_FLAG_EMU_EDGE is deprecated, so this function is no longer
* needed
*/
attribute_deprecated
unsigned avcodec_get_edge_width(void);
#endif
/**
* Modify width and height values so that they will result in a memory
* buffer that is acceptable for the codec if you do not use any horizontal
* padding.
*
* May only be used if a codec with CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions(AVCodecContext *s, int *width, int *height);
/**
* Modify width and height values so that they will result in a memory
* buffer that is acceptable for the codec if you also ensure that all
* line sizes are a multiple of the respective linesize_align[i].
*
* May only be used if a codec with CODEC_CAP_DR1 has been opened.
*/
void avcodec_align_dimensions2(AVCodecContext *s, int *width, int *height,
int linesize_align[AV_NUM_DATA_POINTERS]);
/**
* Converts AVChromaLocation to swscale x/y chroma position.
*
* The positions represent the chroma (0,0) position in a coordinates system
* with luma (0,0) representing the origin and luma(1,1) representing 256,256
*
* @param xpos horizontal chroma sample position
* @param ypos vertical chroma sample position
*/
int avcodec_enum_to_chroma_pos(int *xpos, int *ypos, enum AVChromaLocation pos);
/**
* Converts swscale x/y chroma position to AVChromaLocation.
*
* The positions represent the chroma (0,0) position in a coordinates system
* with luma (0,0) representing the origin and luma(1,1) representing 256,256
*
* @param xpos horizontal chroma sample position
* @param ypos vertical chroma sample position
*/
enum AVChromaLocation avcodec_chroma_pos_to_enum(int xpos, int ypos);
#if FF_API_OLD_DECODE_AUDIO
/**
* Wrapper function which calls avcodec_decode_audio4.
*
* @deprecated Use avcodec_decode_audio4 instead.
*
* Decode the audio frame of size avpkt->size from avpkt->data into samples.
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame. In this case,
* avcodec_decode_audio3 has to be called again with an AVPacket that contains
* the remaining data in order to decode the second frame etc.
* If no frame
* could be outputted, frame_size_ptr is zero. Otherwise, it is the
* decompressed frame size in bytes.
*
* @warning You must set frame_size_ptr to the allocated size of the
* output buffer before calling avcodec_decode_audio3().
*
* @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer avpkt->data should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
* @warning You must not provide a custom get_buffer() when using
* avcodec_decode_audio3(). Doing so will override it with
* avcodec_default_get_buffer. Use avcodec_decode_audio4() instead,
* which does allow the application to provide a custom get_buffer().
*
* @note You might have to align the input buffer avpkt->data and output buffer
* samples. The alignment requirements depend on the CPU: On some CPUs it isn't
* necessary at all, on others it won't work at all if not aligned and on others
* it will work but it will have an impact on performance.
*
* In practice, avpkt->data should have 4 byte alignment at minimum and
* samples should be 16 byte aligned unless the CPU doesn't need it
* (AltiVec and SSE do).
*
* @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
* @param avctx the codec context
* @param[out] samples the output buffer, sample type in avctx->sample_fmt
* If the sample format is planar, each channel plane will
* be the same size, with no padding between channels.
* @param[in,out] frame_size_ptr the output buffer size in bytes
* @param[in] avpkt The input AVPacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* data and size, some decoders might in addition need other fields.
* All decoders are designed to use the least fields possible though.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame data was decompressed (used) from the input AVPacket.
*/
attribute_deprecated int avcodec_decode_audio3(AVCodecContext *avctx, int16_t *samples,
int *frame_size_ptr,
AVPacket *avpkt);
#endif
/**
* Decode the audio frame of size avpkt->size from avpkt->data into frame.
*
* Some decoders may support multiple frames in a single AVPacket. Such
* decoders would then just decode the first frame and the return value would be
* less than the packet size. In this case, avcodec_decode_audio4 has to be
* called again with an AVPacket containing the remaining data in order to
* decode the second frame, etc... Even if no frames are returned, the packet
* needs to be fed to the decoder with remaining data until it is completely
* consumed or an error occurs.
*
* Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning samples. It is safe to flush even those decoders that are not
* marked with CODEC_CAP_DELAY, then no samples will be returned.
*
* @warning The input buffer, avpkt->data must be FF_INPUT_BUFFER_PADDING_SIZE
* larger than the actual read bytes because some optimized bitstream
* readers read 32 or 64 bits at once and could read over the end.
*
* @param avctx the codec context
* @param[out] frame The AVFrame in which to store decoded audio samples.
* The decoder will allocate a buffer for the decoded frame by
* calling the AVCodecContext.get_buffer2() callback.
* When AVCodecContext.refcounted_frames is set to 1, the frame is
* reference counted and the returned reference belongs to the
* caller. The caller must release the frame using av_frame_unref()
* when the frame is no longer needed. The caller may safely write
* to the frame if av_frame_is_writable() returns 1.
* When AVCodecContext.refcounted_frames is set to 0, the returned
* reference belongs to the decoder and is valid only until the
* next call to this function or until closing or flushing the
* decoder. The caller may not write to it.
* @param[out] got_frame_ptr Zero if no frame could be decoded, otherwise it is
* non-zero. Note that this field being set to zero
* does not mean that an error has occurred. For
* decoders with CODEC_CAP_DELAY set, no given decode
* call is guaranteed to produce a frame.
* @param[in] avpkt The input AVPacket containing the input buffer.
* At least avpkt->data and avpkt->size should be set. Some
* decoders might also require additional fields to be set.
* @return A negative error code is returned if an error occurred during
* decoding, otherwise the number of bytes consumed from the input
* AVPacket is returned.
*/
int avcodec_decode_audio4(AVCodecContext *avctx, AVFrame *frame,
int *got_frame_ptr, const AVPacket *avpkt);
/**
* Decode the video frame of size avpkt->size from avpkt->data into picture.
* Some decoders may support multiple frames in a single AVPacket, such
* decoders would then just decode the first frame.
*
* @warning The input buffer must be FF_INPUT_BUFFER_PADDING_SIZE larger than
* the actual read bytes because some optimized bitstream readers read 32 or 64
* bits at once and could read over the end.
*
* @warning The end of the input buffer buf should be set to 0 to ensure that
* no overreading happens for damaged MPEG streams.
*
* @note Codecs which have the CODEC_CAP_DELAY capability set have a delay
* between input and output, these need to be fed with avpkt->data=NULL,
* avpkt->size=0 at the end to return the remaining frames.
*
* @param avctx the codec context
* @param[out] picture The AVFrame in which the decoded video frame will be stored.
* Use av_frame_alloc() to get an AVFrame. The codec will
* allocate memory for the actual bitmap by calling the
* AVCodecContext.get_buffer2() callback.
* When AVCodecContext.refcounted_frames is set to 1, the frame is
* reference counted and the returned reference belongs to the
* caller. The caller must release the frame using av_frame_unref()
* when the frame is no longer needed. The caller may safely write
* to the frame if av_frame_is_writable() returns 1.
* When AVCodecContext.refcounted_frames is set to 0, the returned
* reference belongs to the decoder and is valid only until the
* next call to this function or until closing or flushing the
* decoder. The caller may not write to it.
*
* @param[in] avpkt The input AVPacket containing the input buffer.
* You can create such packet with av_init_packet() and by then setting
* data and size, some decoders might in addition need other fields like
* flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least
* fields possible.
* @param[in,out] got_picture_ptr Zero if no frame could be decompressed, otherwise, it is nonzero.
* @return On error a negative value is returned, otherwise the number of bytes
* used or zero if no frame could be decompressed.
*/
int avcodec_decode_video2(AVCodecContext *avctx, AVFrame *picture,
int *got_picture_ptr,
const AVPacket *avpkt);
/**
* Decode a subtitle message.
* Return a negative value on error, otherwise return the number of bytes used.
* If no subtitle could be decompressed, got_sub_ptr is zero.
* Otherwise, the subtitle is stored in *sub.
* Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for
* simplicity, because the performance difference is expect to be negligible
* and reusing a get_buffer written for video codecs would probably perform badly
* due to a potentially very different allocation pattern.
*
* Some decoders (those marked with CODEC_CAP_DELAY) have a delay between input
* and output. This means that for some packets they will not immediately
* produce decoded output and need to be flushed at the end of decoding to get
* all the decoded data. Flushing is done by calling this function with packets
* with avpkt->data set to NULL and avpkt->size set to 0 until it stops
* returning subtitles. It is safe to flush even those decoders that are not
* marked with CODEC_CAP_DELAY, then no subtitles will be returned.
*
* @param avctx the codec context
* @param[out] sub The AVSubtitle in which the decoded subtitle will be stored, must be
freed with avsubtitle_free if *got_sub_ptr is set.
* @param[in,out] got_sub_ptr Zero if no subtitle could be decompressed, otherwise, it is nonzero.
* @param[in] avpkt The input AVPacket containing the input buffer.
*/
int avcodec_decode_subtitle2(AVCodecContext *avctx, AVSubtitle *sub,
int *got_sub_ptr,
AVPacket *avpkt);
/**
* @defgroup lavc_parsing Frame parsing
* @{
*/
enum AVPictureStructure {
AV_PICTURE_STRUCTURE_UNKNOWN, //< unknown
AV_PICTURE_STRUCTURE_TOP_FIELD, //< coded as top field
AV_PICTURE_STRUCTURE_BOTTOM_FIELD, //< coded as bottom field
AV_PICTURE_STRUCTURE_FRAME, //< coded as frame
};
typedef struct AVCodecParserContext {
void *priv_data;
struct AVCodecParser *parser;
int64_t frame_offset; /* offset of the current frame */
int64_t cur_offset; /* current offset
(incremented by each av_parser_parse()) */
int64_t next_frame_offset; /* offset of the next frame */
/* video info */
int pict_type; /* XXX: Put it back in AVCodecContext. */
/**
* This field is used for proper frame duration computation in lavf.
* It signals, how much longer the frame duration of the current frame
* is compared to normal frame duration.
*
* frame_duration = (1 + repeat_pict) * time_base
*
* It is used by codecs like H.264 to display telecined material.
*/
int repeat_pict; /* XXX: Put it back in AVCodecContext. */
int64_t pts; /* pts of the current frame */
int64_t dts; /* dts of the current frame */
/* private data */
int64_t last_pts;
int64_t last_dts;
int fetch_timestamp;
#define AV_PARSER_PTS_NB 4
int cur_frame_start_index;
int64_t cur_frame_offset[AV_PARSER_PTS_NB];
int64_t cur_frame_pts[AV_PARSER_PTS_NB];
int64_t cur_frame_dts[AV_PARSER_PTS_NB];
int flags;
#define PARSER_FLAG_COMPLETE_FRAMES 0x0001
#define PARSER_FLAG_ONCE 0x0002
/// Set if the parser has a valid file offset
#define PARSER_FLAG_FETCHED_OFFSET 0x0004
#define PARSER_FLAG_USE_CODEC_TS 0x1000
int64_t offset; ///< byte offset from starting packet start
int64_t cur_frame_end[AV_PARSER_PTS_NB];
/**
* Set by parser to 1 for key frames and 0 for non-key frames.
* It is initialized to -1, so if the parser doesn't set this flag,
* old-style fallback using AV_PICTURE_TYPE_I picture type as key frames
* will be used.
*/
int key_frame;
/**
* Time difference in stream time base units from the pts of this
* packet to the point at which the output from the decoder has converged
* independent from the availability of previous frames. That is, the
* frames are virtually identical no matter if decoding started from
* the very first frame or from this keyframe.
* Is AV_NOPTS_VALUE if unknown.
* This field is not the display duration of the current frame.
* This field has no meaning if the packet does not have AV_PKT_FLAG_KEY
* set.
*
* The purpose of this field is to allow seeking in streams that have no
* keyframes in the conventional sense. It corresponds to the
* recovery point SEI in H.264 and match_time_delta in NUT. It is also
* essential for some types of subtitle streams to ensure that all
* subtitles are correctly displayed after seeking.
*/
int64_t convergence_duration;
// Timestamp generation support:
/**
* Synchronization point for start of timestamp generation.
*
* Set to >0 for sync point, 0 for no sync point and <0 for undefined
* (default).
*
* For example, this corresponds to presence of H.264 buffering period
* SEI message.
*/
int dts_sync_point;
/**
* Offset of the current timestamp against last timestamp sync point in
* units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain a valid timestamp offset.
*
* Note that the timestamp of sync point has usually a nonzero
* dts_ref_dts_delta, which refers to the previous sync point. Offset of
* the next frame after timestamp sync point will be usually 1.
*
* For example, this corresponds to H.264 cpb_removal_delay.
*/
int dts_ref_dts_delta;
/**
* Presentation delay of current frame in units of AVCodecContext.time_base.
*
* Set to INT_MIN when dts_sync_point unused. Otherwise, it must
* contain valid non-negative timestamp delta (presentation time of a frame
* must not lie in the past).
*
* This delay represents the difference between decoding and presentation
* time of the frame.
*
* For example, this corresponds to H.264 dpb_output_delay.
*/
int pts_dts_delta;
/**
* Position of the packet in file.
*
* Analogous to cur_frame_pts/dts
*/
int64_t cur_frame_pos[AV_PARSER_PTS_NB];
/**
* Byte position of currently parsed frame in stream.
*/
int64_t pos;
/**
* Previous frame byte position.
*/
int64_t last_pos;
/**
* Duration of the current frame.
* For audio, this is in units of 1 / AVCodecContext.sample_rate.
* For all other types, this is in units of AVCodecContext.time_base.
*/
int duration;
enum AVFieldOrder field_order;
/**
* Indicate whether a picture is coded as a frame, top field or bottom field.
*
* For example, H.264 field_pic_flag equal to 0 corresponds to
* AV_PICTURE_STRUCTURE_FRAME. An H.264 picture with field_pic_flag
* equal to 1 and bottom_field_flag equal to 0 corresponds to
* AV_PICTURE_STRUCTURE_TOP_FIELD.
*/
enum AVPictureStructure picture_structure;
/**
* Picture number incremented in presentation or output order.
* This field may be reinitialized at the first picture of a new sequence.
*
* For example, this corresponds to H.264 PicOrderCnt.
*/
int output_picture_number;
} AVCodecParserContext;
typedef struct AVCodecParser {
int codec_ids[5]; /* several codec IDs are permitted */
int priv_data_size;
int (*parser_init)(AVCodecParserContext *s);
int (*parser_parse)(AVCodecParserContext *s,
AVCodecContext *avctx,
const uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size);
void (*parser_close)(AVCodecParserContext *s);
int (*split)(AVCodecContext *avctx, const uint8_t *buf, int buf_size);
struct AVCodecParser *next;
} AVCodecParser;
AVCodecParser *av_parser_next(AVCodecParser *c);
void av_register_codec_parser(AVCodecParser *parser);
AVCodecParserContext *av_parser_init(int codec_id);
/**
* Parse a packet.
*
* @param s parser context.
* @param avctx codec context.
* @param poutbuf set to pointer to parsed buffer or NULL if not yet finished.
* @param poutbuf_size set to size of parsed buffer or zero if not yet finished.
* @param buf input buffer.
* @param buf_size input length, to signal EOF, this should be 0 (so that the last frame can be output).
* @param pts input presentation timestamp.
* @param dts input decoding timestamp.
* @param pos input byte position in stream.
* @return the number of bytes of the input bitstream used.
*
* Example:
* @code
* while(in_len){
* len = av_parser_parse2(myparser, AVCodecContext, &data, &size,
* in_data, in_len,
* pts, dts, pos);
* in_data += len;
* in_len -= len;
*
* if(size)
* decode_frame(data, size);
* }
* @endcode
*/
int av_parser_parse2(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size,
int64_t pts, int64_t dts,
int64_t pos);
/**
* @return 0 if the output buffer is a subset of the input, 1 if it is allocated and must be freed
* @deprecated use AVBitStreamFilter
*/
int av_parser_change(AVCodecParserContext *s,
AVCodecContext *avctx,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
void av_parser_close(AVCodecParserContext *s);
/**
* @}
* @}
*/
/**
* @addtogroup lavc_encoding
* @{
*/
/**
* Find a registered encoder with a matching codec ID.
*
* @param id AVCodecID of the requested encoder
* @return An encoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_encoder(enum AVCodecID id);
/**
* Find a registered encoder with the specified name.
*
* @param name name of the requested encoder
* @return An encoder if one was found, NULL otherwise.
*/
AVCodec *avcodec_find_encoder_by_name(const char *name);
#if FF_API_OLD_ENCODE_AUDIO
/**
* Encode an audio frame from samples into buf.
*
* @deprecated Use avcodec_encode_audio2 instead.
*
* @note The output buffer should be at least FF_MIN_BUFFER_SIZE bytes large.
* However, for codecs with avctx->frame_size equal to 0 (e.g. PCM) the user
* will know how much space is needed because it depends on the value passed
* in buf_size as described below. In that case a lower value can be used.
*
* @param avctx the codec context
* @param[out] buf the output buffer
* @param[in] buf_size the output buffer size
* @param[in] samples the input buffer containing the samples
* The number of samples read from this buffer is frame_size*channels,
* both of which are defined in avctx.
* For codecs which have avctx->frame_size equal to 0 (e.g. PCM) the number of
* samples read from samples is equal to:
* buf_size * 8 / (avctx->channels * av_get_bits_per_sample(avctx->codec_id))
* This also implies that av_get_bits_per_sample() must not return 0 for these
* codecs.
* @return On error a negative value is returned, on success zero or the number
* of bytes used to encode the data read from the input buffer.
*/
int attribute_deprecated avcodec_encode_audio(AVCodecContext *avctx,
uint8_t *buf, int buf_size,
const short *samples);
#endif
/**
* Encode a frame of audio.
*
* Takes input samples from frame and writes the next output packet, if
* available, to avpkt. The output packet does not necessarily contain data for
* the most recent frame, as encoders can delay, split, and combine input frames
* internally as needed.
*
* @param avctx codec context
* @param avpkt output AVPacket.
* The user can supply an output buffer by setting
* avpkt->data and avpkt->size prior to calling the
* function, but if the size of the user-provided data is not
* large enough, encoding will fail. If avpkt->data and
* avpkt->size are set, avpkt->destruct must also be set. All
* other AVPacket fields will be reset by the encoder using
* av_init_packet(). If avpkt->data is NULL, the encoder will
* allocate it. The encoder will set avpkt->size to the size
* of the output packet.
*
* If this function fails or produces no output, avpkt will be
* freed using av_free_packet() (i.e. avpkt->destruct will be
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw audio data to be encoded.
* May be NULL when flushing an encoder that has the
* CODEC_CAP_DELAY capability set.
* If CODEC_CAP_VARIABLE_FRAME_SIZE is set, then each frame
* can have any number of samples.
* If it is not set, frame->nb_samples must be equal to
* avctx->frame_size for all frames except the last.
* The final frame may be smaller than avctx->frame_size.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
* packet can be assumed to be invalid, and the
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
*/
int avcodec_encode_audio2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
#if FF_API_OLD_ENCODE_VIDEO
/**
* @deprecated use avcodec_encode_video2() instead.
*
* Encode a video frame from pict into buf.
* The input picture should be
* stored using a specific format, namely avctx.pix_fmt.
*
* @param avctx the codec context
* @param[out] buf the output buffer for the bitstream of encoded frame
* @param[in] buf_size the size of the output buffer in bytes
* @param[in] pict the input picture to encode
* @return On error a negative value is returned, on success zero or the number
* of bytes used from the output buffer.
*/
attribute_deprecated
int avcodec_encode_video(AVCodecContext *avctx, uint8_t *buf, int buf_size,
const AVFrame *pict);
#endif
/**
* Encode a frame of video.
*
* Takes input raw video data from frame and writes the next output packet, if
* available, to avpkt. The output packet does not necessarily contain data for
* the most recent frame, as encoders can delay and reorder input frames
* internally as needed.
*
* @param avctx codec context
* @param avpkt output AVPacket.
* The user can supply an output buffer by setting
* avpkt->data and avpkt->size prior to calling the
* function, but if the size of the user-provided data is not
* large enough, encoding will fail. All other AVPacket fields
* will be reset by the encoder using av_init_packet(). If
* avpkt->data is NULL, the encoder will allocate it.
* The encoder will set avpkt->size to the size of the
* output packet. The returned data (if any) belongs to the
* caller, he is responsible for freeing it.
*
* If this function fails or produces no output, avpkt will be
* freed using av_free_packet() (i.e. avpkt->destruct will be
* called to free the user supplied buffer).
* @param[in] frame AVFrame containing the raw video data to be encoded.
* May be NULL when flushing an encoder that has the
* CODEC_CAP_DELAY capability set.
* @param[out] got_packet_ptr This field is set to 1 by libavcodec if the
* output packet is non-empty, and to 0 if it is
* empty. If the function returns an error, the
* packet can be assumed to be invalid, and the
* value of got_packet_ptr is undefined and should
* not be used.
* @return 0 on success, negative error code on failure
*/
int avcodec_encode_video2(AVCodecContext *avctx, AVPacket *avpkt,
const AVFrame *frame, int *got_packet_ptr);
int avcodec_encode_subtitle(AVCodecContext *avctx, uint8_t *buf, int buf_size,
const AVSubtitle *sub);
/**
* @}
*/
#if FF_API_AVCODEC_RESAMPLE
/**
* @defgroup lavc_resample Audio resampling
* @ingroup libavc
* @deprecated use libswresample instead
*
* @{
*/
struct ReSampleContext;
struct AVResampleContext;
typedef struct ReSampleContext ReSampleContext;
/**
* Initialize audio resampling context.
*
* @param output_channels number of output channels
* @param input_channels number of input channels
* @param output_rate output sample rate
* @param input_rate input sample rate
* @param sample_fmt_out requested output sample format
* @param sample_fmt_in input sample format
* @param filter_length length of each FIR filter in the filterbank relative to the cutoff frequency
* @param log2_phase_count log2 of the number of entries in the polyphase filterbank
* @param linear if 1 then the used FIR filter will be linearly interpolated
between the 2 closest, if 0 the closest will be used
* @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
* @return allocated ReSampleContext, NULL if error occurred
*/
attribute_deprecated
ReSampleContext *av_audio_resample_init(int output_channels, int input_channels,
int output_rate, int input_rate,
enum AVSampleFormat sample_fmt_out,
enum AVSampleFormat sample_fmt_in,
int filter_length, int log2_phase_count,
int linear, double cutoff);
attribute_deprecated
int audio_resample(ReSampleContext *s, short *output, short *input, int nb_samples);
/**
* Free resample context.
*
* @param s a non-NULL pointer to a resample context previously
* created with av_audio_resample_init()
*/
attribute_deprecated
void audio_resample_close(ReSampleContext *s);
/**
* Initialize an audio resampler.
* Note, if either rate is not an integer then simply scale both rates up so they are.
* @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
* @param log2_phase_count log2 of the number of entries in the polyphase filterbank
* @param linear If 1 then the used FIR filter will be linearly interpolated
between the 2 closest, if 0 the closest will be used
* @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
*/
attribute_deprecated
struct AVResampleContext *av_resample_init(int out_rate, int in_rate, int filter_length, int log2_phase_count, int linear, double cutoff);
/**
* Resample an array of samples using a previously configured context.
* @param src an array of unconsumed samples
* @param consumed the number of samples of src which have been consumed are returned here
* @param src_size the number of unconsumed samples available
* @param dst_size the amount of space in samples available in dst
* @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
* @return the number of samples written in dst or -1 if an error occurred
*/
attribute_deprecated
int av_resample(struct AVResampleContext *c, short *dst, short *src, int *consumed, int src_size, int dst_size, int update_ctx);
/**
* Compensate samplerate/timestamp drift. The compensation is done by changing
* the resampler parameters, so no audible clicks or similar distortions occur
* @param compensation_distance distance in output samples over which the compensation should be performed
* @param sample_delta number of output samples which should be output less
*
* example: av_resample_compensate(c, 10, 500)
* here instead of 510 samples only 500 samples would be output
*
* note, due to rounding the actual compensation might be slightly different,
* especially if the compensation_distance is large and the in_rate used during init is small
*/
attribute_deprecated
void av_resample_compensate(struct AVResampleContext *c, int sample_delta, int compensation_distance);
attribute_deprecated
void av_resample_close(struct AVResampleContext *c);
/**
* @}
*/
#endif
/**
* @addtogroup lavc_picture
* @{
*/
/**
* Allocate memory for the pixels of a picture and setup the AVPicture
* fields for it.
*
* Call avpicture_free() to free it.
*
* @param picture the picture structure to be filled in
* @param pix_fmt the pixel format of the picture
* @param width the width of the picture
* @param height the height of the picture
* @return zero if successful, a negative error code otherwise
*
* @see av_image_alloc(), avpicture_fill()
*/
int avpicture_alloc(AVPicture *picture, enum AVPixelFormat pix_fmt, int width, int height);
/**
* Free a picture previously allocated by avpicture_alloc().
* The data buffer used by the AVPicture is freed, but the AVPicture structure
* itself is not.
*
* @param picture the AVPicture to be freed
*/
void avpicture_free(AVPicture *picture);
/**
* Setup the picture fields based on the specified image parameters
* and the provided image data buffer.
*
* The picture fields are filled in by using the image data buffer
* pointed to by ptr.
*
* If ptr is NULL, the function will fill only the picture linesize
* array and return the required size for the image buffer.
*
* To allocate an image buffer and fill the picture data in one call,
* use avpicture_alloc().
*
* @param picture the picture to be filled in
* @param ptr buffer where the image data is stored, or NULL
* @param pix_fmt the pixel format of the image
* @param width the width of the image in pixels
* @param height the height of the image in pixels
* @return the size in bytes required for src, a negative error code
* in case of failure
*
* @see av_image_fill_arrays()
*/
int avpicture_fill(AVPicture *picture, const uint8_t *ptr,
enum AVPixelFormat pix_fmt, int width, int height);
/**
* Copy pixel data from an AVPicture into a buffer.
*
* avpicture_get_size() can be used to compute the required size for
* the buffer to fill.
*
* @param src source picture with filled data
* @param pix_fmt picture pixel format
* @param width picture width
* @param height picture height
* @param dest destination buffer
* @param dest_size destination buffer size in bytes
* @return the number of bytes written to dest, or a negative value
* (error code) on error, for example if the destination buffer is not
* big enough
*
* @see av_image_copy_to_buffer()
*/
int avpicture_layout(const AVPicture *src, enum AVPixelFormat pix_fmt,
int width, int height,
unsigned char *dest, int dest_size);
/**
* Calculate the size in bytes that a picture of the given width and height
* would occupy if stored in the given picture format.
*
* @param pix_fmt picture pixel format
* @param width picture width
* @param height picture height
* @return the computed picture buffer size or a negative error code
* in case of error
*
* @see av_image_get_buffer_size().
*/
int avpicture_get_size(enum AVPixelFormat pix_fmt, int width, int height);
#if FF_API_DEINTERLACE
/**
* deinterlace - if not supported return -1
*
* @deprecated - use yadif (in libavfilter) instead
*/
attribute_deprecated
int avpicture_deinterlace(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int width, int height);
#endif
/**
* Copy image src to dst. Wraps av_image_copy().
*/
void av_picture_copy(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int width, int height);
/**
* Crop image top and left side.
*/
int av_picture_crop(AVPicture *dst, const AVPicture *src,
enum AVPixelFormat pix_fmt, int top_band, int left_band);
/**
* Pad image.
*/
int av_picture_pad(AVPicture *dst, const AVPicture *src, int height, int width, enum AVPixelFormat pix_fmt,
int padtop, int padbottom, int padleft, int padright, int *color);
/**
* @}
*/
/**
* @defgroup lavc_misc Utility functions
* @ingroup libavc
*
* Miscellaneous utility functions related to both encoding and decoding
* (or neither).
* @{
*/
/**
* @defgroup lavc_misc_pixfmt Pixel formats
*
* Functions for working with pixel formats.
* @{
*/
/**
* Utility function to access log2_chroma_w log2_chroma_h from
* the pixel format AVPixFmtDescriptor.
*
* This function asserts that pix_fmt is valid. See av_pix_fmt_get_chroma_sub_sample
* for one that returns a failure code and continues in case of invalid
* pix_fmts.
*
* @param[in] pix_fmt the pixel format
* @param[out] h_shift store log2_chroma_w
* @param[out] v_shift store log2_chroma_h
*
* @see av_pix_fmt_get_chroma_sub_sample
*/
void avcodec_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift);
/**
* Return a value representing the fourCC code associated to the
* pixel format pix_fmt, or 0 if no associated fourCC code can be
* found.
*/
unsigned int avcodec_pix_fmt_to_codec_tag(enum AVPixelFormat pix_fmt);
#define FF_LOSS_RESOLUTION 0x0001 /**< loss due to resolution change */
#define FF_LOSS_DEPTH 0x0002 /**< loss due to color depth change */
#define FF_LOSS_COLORSPACE 0x0004 /**< loss due to color space conversion */
#define FF_LOSS_ALPHA 0x0008 /**< loss of alpha bits */
#define FF_LOSS_COLORQUANT 0x0010 /**< loss due to color quantization */
#define FF_LOSS_CHROMA 0x0020 /**< loss of chroma (e.g. RGB to gray conversion) */
/**
* Compute what kind of losses will occur when converting from one specific
* pixel format to another.
* When converting from one pixel format to another, information loss may occur.
* For example, when converting from RGB24 to GRAY, the color information will
* be lost. Similarly, other losses occur when converting from some formats to
* other formats. These losses can involve loss of chroma, but also loss of
* resolution, loss of color depth, loss due to the color space conversion, loss
* of the alpha bits or loss due to color quantization.
* avcodec_get_fix_fmt_loss() informs you about the various types of losses
* which will occur when converting from one pixel format to another.
*
* @param[in] dst_pix_fmt destination pixel format
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @return Combination of flags informing you what kind of losses will occur
* (maximum loss for an invalid dst_pix_fmt).
*/
int avcodec_get_pix_fmt_loss(enum AVPixelFormat dst_pix_fmt, enum AVPixelFormat src_pix_fmt,
int has_alpha);
/**
* Find the best pixel format to convert to given a certain source pixel
* format. When converting from one pixel format to another, information loss
* may occur. For example, when converting from RGB24 to GRAY, the color
* information will be lost. Similarly, other losses occur when converting from
* some formats to other formats. avcodec_find_best_pix_fmt_of_2() searches which of
* the given pixel formats should be used to suffer the least amount of loss.
* The pixel formats from which it chooses one, are determined by the
* pix_fmt_list parameter.
*
*
* @param[in] pix_fmt_list AV_PIX_FMT_NONE terminated array of pixel formats to choose from
* @param[in] src_pix_fmt source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @param[out] loss_ptr Combination of flags informing you what kind of losses will occur.
* @return The best pixel format to convert to or -1 if none was found.
*/
enum AVPixelFormat avcodec_find_best_pix_fmt_of_list(const enum AVPixelFormat *pix_fmt_list,
enum AVPixelFormat src_pix_fmt,
int has_alpha, int *loss_ptr);
/**
* Find the best pixel format to convert to given a certain source pixel
* format and a selection of two destination pixel formats. When converting from
* one pixel format to another, information loss may occur. For example, when converting
* from RGB24 to GRAY, the color information will be lost. Similarly, other losses occur when
* converting from some formats to other formats. avcodec_find_best_pix_fmt_of_2() selects which of
* the given pixel formats should be used to suffer the least amount of loss.
*
* If one of the destination formats is AV_PIX_FMT_NONE the other pixel format (if valid) will be
* returned.
*
* @code
* src_pix_fmt = AV_PIX_FMT_YUV420P;
* dst_pix_fmt1= AV_PIX_FMT_RGB24;
* dst_pix_fmt2= AV_PIX_FMT_GRAY8;
* dst_pix_fmt3= AV_PIX_FMT_RGB8;
* loss= FF_LOSS_CHROMA; // don't care about chroma loss, so chroma loss will be ignored.
* dst_pix_fmt = avcodec_find_best_pix_fmt_of_2(dst_pix_fmt1, dst_pix_fmt2, src_pix_fmt, alpha, &loss);
* dst_pix_fmt = avcodec_find_best_pix_fmt_of_2(dst_pix_fmt, dst_pix_fmt3, src_pix_fmt, alpha, &loss);
* @endcode
*
* @param[in] dst_pix_fmt1 One of the two destination pixel formats to choose from
* @param[in] dst_pix_fmt2 The other of the two destination pixel formats to choose from
* @param[in] src_pix_fmt Source pixel format
* @param[in] has_alpha Whether the source pixel format alpha channel is used.
* @param[in, out] loss_ptr Combination of loss flags. In: selects which of the losses to ignore, i.e.
* NULL or value of zero means we care about all losses. Out: the loss
* that occurs when converting from src to selected dst pixel format.
* @return The best pixel format to convert to or -1 if none was found.
*/
enum AVPixelFormat avcodec_find_best_pix_fmt_of_2(enum AVPixelFormat dst_pix_fmt1, enum AVPixelFormat dst_pix_fmt2,
enum AVPixelFormat src_pix_fmt, int has_alpha, int *loss_ptr);
attribute_deprecated
#if AV_HAVE_INCOMPATIBLE_LIBAV_ABI
enum AVPixelFormat avcodec_find_best_pix_fmt2(const enum AVPixelFormat *pix_fmt_list,
enum AVPixelFormat src_pix_fmt,
int has_alpha, int *loss_ptr);
#else
enum AVPixelFormat avcodec_find_best_pix_fmt2(enum AVPixelFormat dst_pix_fmt1, enum AVPixelFormat dst_pix_fmt2,
enum AVPixelFormat src_pix_fmt, int has_alpha, int *loss_ptr);
#endif
enum AVPixelFormat avcodec_default_get_format(struct AVCodecContext *s, const enum AVPixelFormat * fmt);
/**
* @}
*/
#if FF_API_SET_DIMENSIONS
/**
* @deprecated this function is not supposed to be used from outside of lavc
*/
attribute_deprecated
void avcodec_set_dimensions(AVCodecContext *s, int width, int height);
#endif
/**
* Put a string representing the codec tag codec_tag in buf.
*
* @param buf buffer to place codec tag in
* @param buf_size size in bytes of buf
* @param codec_tag codec tag to assign
* @return the length of the string that would have been generated if
* enough space had been available, excluding the trailing null
*/
size_t av_get_codec_tag_string(char *buf, size_t buf_size, unsigned int codec_tag);
void avcodec_string(char *buf, int buf_size, AVCodecContext *enc, int encode);
/**
* Return a name for the specified profile, if available.
*
* @param codec the codec that is searched for the given profile
* @param profile the profile value for which a name is requested
* @return A name for the profile if found, NULL otherwise.
*/
const char *av_get_profile_name(const AVCodec *codec, int profile);
int avcodec_default_execute(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2),void *arg, int *ret, int count, int size);
int avcodec_default_execute2(AVCodecContext *c, int (*func)(AVCodecContext *c2, void *arg2, int, int),void *arg, int *ret, int count);
//FIXME func typedef
/**
* Fill AVFrame audio data and linesize pointers.
*
* The buffer buf must be a preallocated buffer with a size big enough
* to contain the specified samples amount. The filled AVFrame data
* pointers will point to this buffer.
*
* AVFrame extended_data channel pointers are allocated if necessary for
* planar audio.
*
* @param frame the AVFrame
* frame->nb_samples must be set prior to calling the
* function. This function fills in frame->data,
* frame->extended_data, frame->linesize[0].
* @param nb_channels channel count
* @param sample_fmt sample format
* @param buf buffer to use for frame data
* @param buf_size size of buffer
* @param align plane size sample alignment (0 = default)
* @return >=0 on success, negative error code on failure
* @todo return the size in bytes required to store the samples in
* case of success, at the next libavutil bump
*/
int avcodec_fill_audio_frame(AVFrame *frame, int nb_channels,
enum AVSampleFormat sample_fmt, const uint8_t *buf,
int buf_size, int align);
/**
* Reset the internal decoder state / flush internal buffers. Should be called
* e.g. when seeking or when switching to a different stream.
*
* @note when refcounted frames are not used (i.e. avctx->refcounted_frames is 0),
* this invalidates the frames previously returned from the decoder. When
* refcounted frames are used, the decoder just releases any references it might
* keep internally, but the caller's reference remains valid.
*/
void avcodec_flush_buffers(AVCodecContext *avctx);
/**
* Return codec bits per sample.
*
* @param[in] codec_id the codec
* @return Number of bits per sample or zero if unknown for the given codec.
*/
int av_get_bits_per_sample(enum AVCodecID codec_id);
/**
* Return the PCM codec associated with a sample format.
* @param be endianness, 0 for little, 1 for big,
* -1 (or anything else) for native
* @return AV_CODEC_ID_PCM_* or AV_CODEC_ID_NONE
*/
enum AVCodecID av_get_pcm_codec(enum AVSampleFormat fmt, int be);
/**
* Return codec bits per sample.
* Only return non-zero if the bits per sample is exactly correct, not an
* approximation.
*
* @param[in] codec_id the codec
* @return Number of bits per sample or zero if unknown for the given codec.
*/
int av_get_exact_bits_per_sample(enum AVCodecID codec_id);
/**
* Return audio frame duration.
*
* @param avctx codec context
* @param frame_bytes size of the frame, or 0 if unknown
* @return frame duration, in samples, if known. 0 if not able to
* determine.
*/
int av_get_audio_frame_duration(AVCodecContext *avctx, int frame_bytes);
typedef struct AVBitStreamFilterContext {
void *priv_data;
struct AVBitStreamFilter *filter;
AVCodecParserContext *parser;
struct AVBitStreamFilterContext *next;
} AVBitStreamFilterContext;
typedef struct AVBitStreamFilter {
const char *name;
int priv_data_size;
int (*filter)(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
void (*close)(AVBitStreamFilterContext *bsfc);
struct AVBitStreamFilter *next;
} AVBitStreamFilter;
/**
* Register a bitstream filter.
*
* The filter will be accessible to the application code through
* av_bitstream_filter_next() or can be directly initialized with
* av_bitstream_filter_init().
*
* @see avcodec_register_all()
*/
void av_register_bitstream_filter(AVBitStreamFilter *bsf);
/**
* Create and initialize a bitstream filter context given a bitstream
* filter name.
*
* The returned context must be freed with av_bitstream_filter_close().
*
* @param name the name of the bitstream filter
* @return a bitstream filter context if a matching filter was found
* and successfully initialized, NULL otherwise
*/
AVBitStreamFilterContext *av_bitstream_filter_init(const char *name);
/**
* Filter bitstream.
*
* This function filters the buffer buf with size buf_size, and places the
* filtered buffer in the buffer pointed to by poutbuf.
*
* The output buffer must be freed by the caller.
*
* @param bsfc bitstream filter context created by av_bitstream_filter_init()
* @param avctx AVCodecContext accessed by the filter, may be NULL.
* If specified, this must point to the encoder context of the
* output stream the packet is sent to.
* @param args arguments which specify the filter configuration, may be NULL
* @param poutbuf pointer which is updated to point to the filtered buffer
* @param poutbuf_size pointer which is updated to the filtered buffer size in bytes
* @param buf buffer containing the data to filter
* @param buf_size size in bytes of buf
* @param keyframe set to non-zero if the buffer to filter corresponds to a key-frame packet data
* @return >= 0 in case of success, or a negative error code in case of failure
*
* If the return value is positive, an output buffer is allocated and
* is availble in *poutbuf, and is distinct from the input buffer.
*
* If the return value is 0, the output buffer is not allocated and
* should be considered identical to the input buffer, or in case
* *poutbuf was set it points to the input buffer (not necessarily to
* its starting address).
*/
int av_bitstream_filter_filter(AVBitStreamFilterContext *bsfc,
AVCodecContext *avctx, const char *args,
uint8_t **poutbuf, int *poutbuf_size,
const uint8_t *buf, int buf_size, int keyframe);
/**
* Release bitstream filter context.
*
* @param bsf the bitstream filter context created with
* av_bitstream_filter_init(), can be NULL
*/
void av_bitstream_filter_close(AVBitStreamFilterContext *bsf);
/**
* If f is NULL, return the first registered bitstream filter,
* if f is non-NULL, return the next registered bitstream filter
* after f, or NULL if f is the last one.
*
* This function can be used to iterate over all registered bitstream
* filters.
*/
AVBitStreamFilter *av_bitstream_filter_next(AVBitStreamFilter *f);
/* memory */
/**
* Same behaviour av_fast_malloc but the buffer has additional
* FF_INPUT_BUFFER_PADDING_SIZE at the end which will always be 0.
*
* In addition the whole buffer will initially and after resizes
* be 0-initialized so that no uninitialized data will ever appear.
*/
void av_fast_padded_malloc(void *ptr, unsigned int *size, size_t min_size);
/**
* Same behaviour av_fast_padded_malloc except that buffer will always
* be 0-initialized after call.
*/
void av_fast_padded_mallocz(void *ptr, unsigned int *size, size_t min_size);
/**
* Encode extradata length to a buffer. Used by xiph codecs.
*
* @param s buffer to write to; must be at least (v/255+1) bytes long
* @param v size of extradata in bytes
* @return number of bytes written to the buffer.
*/
unsigned int av_xiphlacing(unsigned char *s, unsigned int v);
#if FF_API_MISSING_SAMPLE
/**
* Log a generic warning message about a missing feature. This function is
* intended to be used internally by FFmpeg (libavcodec, libavformat, etc.)
* only, and would normally not be used by applications.
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
* @param[in] feature string containing the name of the missing feature
* @param[in] want_sample indicates if samples are wanted which exhibit this feature.
* If want_sample is non-zero, additional verbage will be added to the log
* message which tells the user how to report samples to the development
* mailing list.
* @deprecated Use avpriv_report_missing_feature() instead.
*/
attribute_deprecated
void av_log_missing_feature(void *avc, const char *feature, int want_sample);
/**
* Log a generic warning message asking for a sample. This function is
* intended to be used internally by FFmpeg (libavcodec, libavformat, etc.)
* only, and would normally not be used by applications.
* @param[in] avc a pointer to an arbitrary struct of which the first field is
* a pointer to an AVClass struct
* @param[in] msg string containing an optional message, or NULL if no message
* @deprecated Use avpriv_request_sample() instead.
*/
attribute_deprecated
void av_log_ask_for_sample(void *avc, const char *msg, ...) av_printf_format(2, 3);
#endif /* FF_API_MISSING_SAMPLE */
/**
* Register the hardware accelerator hwaccel.
*/
void av_register_hwaccel(AVHWAccel *hwaccel);
/**
* If hwaccel is NULL, returns the first registered hardware accelerator,
* if hwaccel is non-NULL, returns the next registered hardware accelerator
* after hwaccel, or NULL if hwaccel is the last one.
*/
AVHWAccel *av_hwaccel_next(AVHWAccel *hwaccel);
/**
* Lock operation used by lockmgr
*/
enum AVLockOp {
AV_LOCK_CREATE, ///< Create a mutex
AV_LOCK_OBTAIN, ///< Lock the mutex
AV_LOCK_RELEASE, ///< Unlock the mutex
AV_LOCK_DESTROY, ///< Free mutex resources
};
/**
* Register a user provided lock manager supporting the operations
* specified by AVLockOp. mutex points to a (void *) where the
* lockmgr should store/get a pointer to a user allocated mutex. It's
* NULL upon AV_LOCK_CREATE and != NULL for all other ops.
*
* @param cb User defined callback. Note: FFmpeg may invoke calls to this
* callback during the call to av_lockmgr_register().
* Thus, the application must be prepared to handle that.
* If cb is set to NULL the lockmgr will be unregistered.
* Also note that during unregistration the previously registered
* lockmgr callback may also be invoked.
*/
int av_lockmgr_register(int (*cb)(void **mutex, enum AVLockOp op));
/**
* Get the type of the given codec.
*/
enum AVMediaType avcodec_get_type(enum AVCodecID codec_id);
/**
* Get the name of a codec.
* @return a static string identifying the codec; never NULL
*/
const char *avcodec_get_name(enum AVCodecID id);
/**
* @return a positive value if s is open (i.e. avcodec_open2() was called on it
* with no corresponding avcodec_close()), 0 otherwise.
*/
int avcodec_is_open(AVCodecContext *s);
/**
* @return a non-zero number if codec is an encoder, zero otherwise
*/
int av_codec_is_encoder(const AVCodec *codec);
/**
* @return a non-zero number if codec is a decoder, zero otherwise
*/
int av_codec_is_decoder(const AVCodec *codec);
/**
* @return descriptor for given codec ID or NULL if no descriptor exists.
*/
const AVCodecDescriptor *avcodec_descriptor_get(enum AVCodecID id);
/**
* Iterate over all codec descriptors known to libavcodec.
*
* @param prev previous descriptor. NULL to get the first descriptor.
*
* @return next descriptor or NULL after the last descriptor
*/
const AVCodecDescriptor *avcodec_descriptor_next(const AVCodecDescriptor *prev);
/**
* @return codec descriptor with the given name or NULL if no such descriptor
* exists.
*/
const AVCodecDescriptor *avcodec_descriptor_get_by_name(const char *name);
/**
* @}
*/
#endif /* AVCODEC_AVCODEC_H */