#ifndef __SQLITEASYNC_H_
#define __SQLITEASYNC_H_ 1
/*
** Make sure we can call this stuff from C++.
*/
#ifdef __cplusplus
extern "C" {
#endif
#define SQLITEASYNC_VFSNAME "sqlite3async"
/*
** THREAD SAFETY NOTES:
**
** Of the four API functions in this file, the following are not threadsafe:
**
** sqlite3async_initialize()
** sqlite3async_shutdown()
**
** Care must be taken that neither of these functions is called while
** another thread may be calling either any sqlite3async_XXX() function
** or an sqlite3_XXX() API function related to a database handle that
** is using the asynchronous IO VFS.
**
** These functions:
**
** sqlite3async_run()
** sqlite3async_control()
**
** are threadsafe. It is quite safe to call either of these functions even
** if another thread may also be calling one of them or an sqlite3_XXX()
** function related to a database handle that uses the asynchronous IO VFS.
*/
/*
** Initialize the asynchronous IO VFS and register it with SQLite using
** sqlite3_vfs_register(). If the asynchronous VFS is already initialized
** and registered, this function is a no-op. The asynchronous IO VFS
** is registered as "sqlite3async".
**
** The asynchronous IO VFS does not make operating system IO requests
** directly. Instead, it uses an existing VFS implementation for all
** required file-system operations. If the first parameter to this function
** is NULL, then the current default VFS is used for IO. If it is not
** NULL, then it must be the name of an existing VFS. In other words, the
** first argument to this function is passed to sqlite3_vfs_find() to
** locate the VFS to use for all real IO operations. This VFS is known
** as the "parent VFS".
**
** If the second parameter to this function is non-zero, then the
** asynchronous IO VFS is registered as the default VFS for all SQLite
** database connections within the process. Otherwise, the asynchronous IO
** VFS is only used by connections opened using sqlite3_open_v2() that
** specifically request VFS "sqlite3async".
**
** If a parent VFS cannot be located, then SQLITE_ERROR is returned.
** In the unlikely event that operating system specific initialization
** fails (win32 systems create the required critical section and event
** objects within this function), then SQLITE_ERROR is also returned.
** Finally, if the call to sqlite3_vfs_register() returns an error, then
** the error code is returned to the user by this function. In all three
** of these cases, intialization has failed and the asynchronous IO VFS
** is not registered with SQLite.
**
** Otherwise, if no error occurs, SQLITE_OK is returned.
*/
int sqlite3async_initialize(const char *zParent, int isDefault);
/*
** This function unregisters the asynchronous IO VFS using
** sqlite3_vfs_unregister().
**
** On win32 platforms, this function also releases the small number of
** critical section and event objects created by sqlite3async_initialize().
*/
void sqlite3async_shutdown();
/*
** This function may only be called when the asynchronous IO VFS is
** installed (after a call to sqlite3async_initialize()). It processes
** zero or more queued write operations before returning. It is expected
** (but not required) that this function will be called by a different
** thread than those threads that use SQLite. The "background thread"
** that performs IO.
**
** How many queued write operations are performed before returning
** depends on the global setting configured by passing the SQLITEASYNC_HALT
** verb to sqlite3async_control() (see below for details). By default
** this function never returns - it processes all pending operations and
** then blocks waiting for new ones.
**
** If multiple simultaneous calls are made to sqlite3async_run() from two
** or more threads, then the calls are serialized internally.
*/
void sqlite3async_run();
/*
** This function may only be called when the asynchronous IO VFS is
** installed (after a call to sqlite3async_initialize()). It is used
** to query or configure various parameters that affect the operation
** of the asynchronous IO VFS. At present there are three parameters
** supported:
**
** * The "halt" parameter, which configures the circumstances under
** which the sqlite3async_run() parameter is configured.
**
** * The "delay" parameter. Setting the delay parameter to a non-zero
** value causes the sqlite3async_run() function to sleep for the
** configured number of milliseconds between each queued write
** operation.
**
** * The "lockfiles" parameter. This parameter determines whether or
** not the asynchronous IO VFS locks the database files it operates
** on. Disabling file locking can improve throughput.
**
** This function is always passed two arguments. When setting the value
** of a parameter, the first argument must be one of SQLITEASYNC_HALT,
** SQLITEASYNC_DELAY or SQLITEASYNC_LOCKFILES. The second argument must
** be passed the new value for the parameter as type "int".
**
** When querying the current value of a paramter, the first argument must
** be one of SQLITEASYNC_GET_HALT, GET_DELAY or GET_LOCKFILES. The second
** argument to this function must be of type (int *). The current value
** of the queried parameter is copied to the memory pointed to by the
** second argument. For example:
**
** int eCurrentHalt;
** int eNewHalt = SQLITEASYNC_HALT_IDLE;
**
** sqlite3async_control(SQLITEASYNC_HALT, eNewHalt);
** sqlite3async_control(SQLITEASYNC_GET_HALT, &eCurrentHalt);
** assert( eNewHalt==eCurrentHalt );
**
** See below for more detail on each configuration parameter.
**
** SQLITEASYNC_HALT:
**
** This is used to set the value of the "halt" parameter. The second
** argument must be one of the SQLITEASYNC_HALT_XXX symbols defined
** below (either NEVER, IDLE and NOW).
**
** If the parameter is set to NEVER, then calls to sqlite3async_run()
** never return. This is the default setting. If the parameter is set
** to IDLE, then calls to sqlite3async_run() return as soon as the
** queue of pending write operations is empty. If the parameter is set
** to NOW, then calls to sqlite3async_run() return as quickly as
** possible, without processing any pending write requests.
**
** If an attempt is made to set this parameter to an integer value other
** than SQLITEASYNC_HALT_NEVER, IDLE or NOW, then sqlite3async_control()
** returns SQLITE_MISUSE and the current value of the parameter is not
** modified.
**
** Modifying the "halt" parameter affects calls to sqlite3async_run()
** made by other threads that are currently in progress.
**
** SQLITEASYNC_DELAY:
**
** This is used to set the value of the "delay" parameter. If set to
** a non-zero value, then after completing a pending write request, the
** sqlite3async_run() function sleeps for the configured number of
** milliseconds.
**
** If an attempt is made to set this parameter to a negative value,
** sqlite3async_control() returns SQLITE_MISUSE and the current value
** of the parameter is not modified.
**
** Modifying the "delay" parameter affects calls to sqlite3async_run()
** made by other threads that are currently in progress.
**
** SQLITEASYNC_LOCKFILES:
**
** This is used to set the value of the "lockfiles" parameter. This
** parameter must be set to either 0 or 1. If set to 1, then the
** asynchronous IO VFS uses the xLock() and xUnlock() methods of the
** parent VFS to lock database files being read and/or written. If
** the parameter is set to 0, then these locks are omitted.
**
** This parameter may only be set when there are no open database
** connections using the VFS and the queue of pending write requests
** is empty. Attempting to set it when this is not true, or to set it
** to a value other than 0 or 1 causes sqlite3async_control() to return
** SQLITE_MISUSE and the value of the parameter to remain unchanged.
**
** If this parameter is set to zero, then it is only safe to access the
** database via the asynchronous IO VFS from within a single process. If
** while writing to the database via the asynchronous IO VFS the database
** is also read or written from within another process, or via another
** connection that does not use the asynchronous IO VFS within the same
** process, the results are undefined (and may include crashes or database
** corruption).
**
** Alternatively, if this parameter is set to 1, then it is safe to access
** the database from multiple connections within multiple processes using
** either the asynchronous IO VFS or the parent VFS directly.
*/
int sqlite3async_control(int op, ...);
/*
** Values that can be used as the first argument to sqlite3async_control().
*/
#define SQLITEASYNC_HALT 1
#define SQLITEASYNC_GET_HALT 2
#define SQLITEASYNC_DELAY 3
#define SQLITEASYNC_GET_DELAY 4
#define SQLITEASYNC_LOCKFILES 5
#define SQLITEASYNC_GET_LOCKFILES 6
/*
** If the first argument to sqlite3async_control() is SQLITEASYNC_HALT,
** the second argument should be one of the following.
*/
#define SQLITEASYNC_HALT_NEVER 0 /* Never halt (default value) */
#define SQLITEASYNC_HALT_NOW 1 /* Halt as soon as possible */
#define SQLITEASYNC_HALT_IDLE 2 /* Halt when write-queue is empty */
#ifdef __cplusplus
} /* End of the 'extern "C"' block */
#endif
#endif /* ifndef __SQLITEASYNC_H_ */