/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- gst_queue2_base_init
- gst_queue2_class_init
- gst_queue2_init
- gst_queue2_finalize
- debug_ranges
- clean_ranges
- find_range
- add_range
- init_ranges
- gst_queue2_acceptcaps
- gst_queue2_getcaps
- gst_queue2_bufferalloc
- update_time_level
- apply_segment
- apply_buffer
- update_buffering
- reset_rate_timer
- update_in_rates
- update_out_rates
- update_cur_level
- gst_queue2_write_buffer_to_file
- update_cur_pos
- perform_seek_to_offset
- gst_queue2_have_data
- gst_queue2_create_read
- gst_queue2_read_item_from_file
- gst_queue2_open_temp_location_file
- gst_queue2_close_temp_location_file
- gst_queue2_flush_temp_file
- gst_queue2_locked_flush
- gst_queue2_locked_enqueue
- gst_queue2_locked_dequeue
- gst_queue2_handle_sink_event
- gst_queue2_is_empty
- gst_queue2_is_filled
- gst_queue2_chain
- gst_queue2_push_one
- gst_queue2_loop
- gst_queue2_handle_src_event
- gst_queue2_peer_query
- gst_queue2_handle_src_query
- gst_queue2_handle_query
- gst_queue2_get_range
- gst_queue2_src_checkgetrange_function
- gst_queue2_sink_activate_push
- gst_queue2_src_activate_push
- gst_queue2_src_activate_pull
- gst_queue2_change_state
- gst_queue2_set_temp_template
- gst_queue2_set_property
- gst_queue2_get_property
/* GStreamer
* Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu>
* 2003 Colin Walters <cwalters@gnome.org>
* 2000,2005,2007 Wim Taymans <wim.taymans@gmail.com>
* 2007 Thiago Sousa Santos <thiagoss@lcc.ufcg.edu.br>
*
* gstqueue2.c:
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/**
* SECTION:element-queue2
*
* Data is queued until one of the limits specified by the
* #GstQueue2:max-size-buffers, #GstQueue2:max-size-bytes and/or
* #GstQueue2:max-size-time properties has been reached. Any attempt to push
* more buffers into the queue will block the pushing thread until more space
* becomes available.
*
* The queue will create a new thread on the source pad to decouple the
* processing on sink and source pad.
*
* You can query how many buffers are queued by reading the
* #GstQueue2:current-level-buffers property.
*
* The default queue size limits are 100 buffers, 2MB of data, or
* two seconds worth of data, whichever is reached first.
*
* If you set temp-tmpl to a value such as /tmp/gstreamer-XXXXXX, the element
* will allocate a random free filename and buffer data in the file.
* By using this, it will buffer the entire stream data on the file independently
* of the queue size limits, they will only be used for buffering statistics.
*
* Since 0.10.24, setting the temp-location property with a filename is deprecated
* because it's impossible to securely open a temporary file in this way. The
* property will still be used to notify the application of the allocated
* filename, though.
*
* Last reviewed on 2009-07-10 (0.10.24)
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "gstqueue2.h"
#include <glib/gstdio.h>
#include "gst/gst-i18n-lib.h"
#ifdef G_OS_WIN32
#include <io.h> /* lseek, open, close, read */
#undef lseek
#define lseek _lseeki64
#undef off_t
#define off_t guint64
#else
#include <unistd.h>
#endif
static GstStaticPadTemplate sinktemplate = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS_ANY);
static GstStaticPadTemplate srctemplate = GST_STATIC_PAD_TEMPLATE ("src",
GST_PAD_SRC,
GST_PAD_ALWAYS,
GST_STATIC_CAPS_ANY);
GST_DEBUG_CATEGORY_STATIC (queue_debug);
#define GST_CAT_DEFAULT (queue_debug)
GST_DEBUG_CATEGORY_STATIC (queue_dataflow);
enum
{
LAST_SIGNAL
};
/* default property values */
#define DEFAULT_MAX_SIZE_BUFFERS 100 /* 100 buffers */
#define DEFAULT_MAX_SIZE_BYTES (2 * 1024 * 1024) /* 2 MB */
#define DEFAULT_MAX_SIZE_TIME 2 * GST_SECOND /* 2 seconds */
#define DEFAULT_USE_BUFFERING FALSE
#define DEFAULT_USE_RATE_ESTIMATE TRUE
#define DEFAULT_LOW_PERCENT 10
#define DEFAULT_HIGH_PERCENT 99
#define DEFAULT_TEMP_REMOVE TRUE
/* other defines */
#define DEFAULT_BUFFER_SIZE 4096
#define QUEUE_IS_USING_TEMP_FILE(queue) ((queue)->temp_location_set || (queue)->temp_template != NULL)
enum
{
PROP_0,
PROP_CUR_LEVEL_BUFFERS,
PROP_CUR_LEVEL_BYTES,
PROP_CUR_LEVEL_TIME,
PROP_MAX_SIZE_BUFFERS,
PROP_MAX_SIZE_BYTES,
PROP_MAX_SIZE_TIME,
PROP_USE_BUFFERING,
PROP_USE_RATE_ESTIMATE,
PROP_LOW_PERCENT,
PROP_HIGH_PERCENT,
PROP_TEMP_TEMPLATE,
PROP_TEMP_LOCATION,
PROP_TEMP_REMOVE,
PROP_LAST
};
#define GST_QUEUE2_CLEAR_LEVEL(l) G_STMT_START { \
l.buffers = 0; \
l.bytes = 0; \
l.time = 0; \
l.rate_time = 0; \
} G_STMT_END
#define STATUS(queue, pad, msg) \
GST_CAT_LOG_OBJECT (queue_dataflow, queue, \
"(%s:%s) " msg ": %u of %u buffers, %u of %u " \
"bytes, %" G_GUINT64_FORMAT " of %" G_GUINT64_FORMAT \
" ns, %"G_GUINT64_FORMAT" items", \
GST_DEBUG_PAD_NAME (pad), \
queue->cur_level.buffers, \
queue->max_level.buffers, \
queue->cur_level.bytes, \
queue->max_level.bytes, \
queue->cur_level.time, \
queue->max_level.time, \
(guint64) (QUEUE_IS_USING_TEMP_FILE(queue) ? \
queue->current->writing_pos - queue->current->max_reading_pos : \
queue->queue->length))
#define GST_QUEUE2_MUTEX_LOCK(q) G_STMT_START { \
g_mutex_lock (q->qlock); \
} G_STMT_END
#define GST_QUEUE2_MUTEX_LOCK_CHECK(q,res,label) G_STMT_START { \
GST_QUEUE2_MUTEX_LOCK (q); \
if (res != GST_FLOW_OK) \
goto label; \
} G_STMT_END
#define GST_QUEUE2_MUTEX_UNLOCK(q) G_STMT_START { \
g_mutex_unlock (q->qlock); \
} G_STMT_END
#define GST_QUEUE2_WAIT_DEL_CHECK(q, res, label) G_STMT_START { \
STATUS (queue, q->sinkpad, "wait for DEL"); \
q->waiting_del = TRUE; \
g_cond_wait (q->item_del, queue->qlock); \
q->waiting_del = FALSE; \
if (res != GST_FLOW_OK) { \
STATUS (queue, q->srcpad, "received DEL wakeup"); \
goto label; \
} \
STATUS (queue, q->sinkpad, "received DEL"); \
} G_STMT_END
#define GST_QUEUE2_WAIT_ADD_CHECK(q, res, label) G_STMT_START { \
STATUS (queue, q->srcpad, "wait for ADD"); \
q->waiting_add = TRUE; \
g_cond_wait (q->item_add, q->qlock); \
q->waiting_add = FALSE; \
if (res != GST_FLOW_OK) { \
STATUS (queue, q->srcpad, "received ADD wakeup"); \
goto label; \
} \
STATUS (queue, q->srcpad, "received ADD"); \
} G_STMT_END
#define GST_QUEUE2_SIGNAL_DEL(q) G_STMT_START { \
if (q->waiting_del) { \
STATUS (q, q->srcpad, "signal DEL"); \
g_cond_signal (q->item_del); \
} \
} G_STMT_END
#define GST_QUEUE2_SIGNAL_ADD(q) G_STMT_START { \
if (q->waiting_add) { \
STATUS (q, q->sinkpad, "signal ADD"); \
g_cond_signal (q->item_add); \
} \
} G_STMT_END
#define _do_init(bla) \
GST_DEBUG_CATEGORY_INIT (queue_debug, "queue2", 0, "queue element"); \
GST_DEBUG_CATEGORY_INIT (queue_dataflow, "queue2_dataflow", 0, \
"dataflow inside the queue element");
GST_BOILERPLATE_FULL (GstQueue2, gst_queue2, GstElement, GST_TYPE_ELEMENT,
_do_init);
static void gst_queue2_finalize (GObject * object);
static void gst_queue2_set_property (GObject * object,
guint prop_id, const GValue * value, GParamSpec * pspec);
static void gst_queue2_get_property (GObject * object,
guint prop_id, GValue * value, GParamSpec * pspec);
static GstFlowReturn gst_queue2_chain (GstPad * pad, GstBuffer * buffer);
static GstFlowReturn gst_queue2_bufferalloc (GstPad * pad, guint64 offset,
guint size, GstCaps * caps, GstBuffer ** buf);
static GstFlowReturn gst_queue2_push_one (GstQueue2 * queue);
static void gst_queue2_loop (GstPad * pad);
static gboolean gst_queue2_handle_sink_event (GstPad * pad, GstEvent * event);
static gboolean gst_queue2_handle_src_event (GstPad * pad, GstEvent * event);
static gboolean gst_queue2_handle_src_query (GstPad * pad, GstQuery * query);
static gboolean gst_queue2_handle_query (GstElement * element,
GstQuery * query);
static GstCaps *gst_queue2_getcaps (GstPad * pad);
static gboolean gst_queue2_acceptcaps (GstPad * pad, GstCaps * caps);
static GstFlowReturn gst_queue2_get_range (GstPad * pad, guint64 offset,
guint length, GstBuffer ** buffer);
static gboolean gst_queue2_src_checkgetrange_function (GstPad * pad);
static gboolean gst_queue2_src_activate_pull (GstPad * pad, gboolean active);
static gboolean gst_queue2_src_activate_push (GstPad * pad, gboolean active);
static gboolean gst_queue2_sink_activate_push (GstPad * pad, gboolean active);
static GstStateChangeReturn gst_queue2_change_state (GstElement * element,
GstStateChange transition);
static gboolean gst_queue2_is_empty (GstQueue2 * queue);
static gboolean gst_queue2_is_filled (GstQueue2 * queue);
/* static guint gst_queue2_signals[LAST_SIGNAL] = { 0 }; */
static void
gst_queue2_base_init (gpointer g_class)
{
GstElementClass *gstelement_class = GST_ELEMENT_CLASS (g_class);
gst_element_class_add_pad_template (gstelement_class,
gst_static_pad_template_get (&srctemplate));
gst_element_class_add_pad_template (gstelement_class,
gst_static_pad_template_get (&sinktemplate));
gst_element_class_set_details_simple (gstelement_class, "Queue 2",
"Generic",
"Simple data queue",
"Erik Walthinsen <omega@cse.ogi.edu>, "
"Wim Taymans <wim.taymans@gmail.com>");
}
static void
gst_queue2_class_init (GstQueue2Class * klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
GstElementClass *gstelement_class = GST_ELEMENT_CLASS (klass);
parent_class = g_type_class_peek_parent (klass);
gobject_class->set_property = gst_queue2_set_property;
gobject_class->get_property = gst_queue2_get_property;
/* properties */
g_object_class_install_property (gobject_class, PROP_CUR_LEVEL_BYTES,
g_param_spec_uint ("current-level-bytes", "Current level (kB)",
"Current amount of data in the queue (bytes)",
0, G_MAXUINT, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_CUR_LEVEL_BUFFERS,
g_param_spec_uint ("current-level-buffers", "Current level (buffers)",
"Current number of buffers in the queue",
0, G_MAXUINT, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_CUR_LEVEL_TIME,
g_param_spec_uint64 ("current-level-time", "Current level (ns)",
"Current amount of data in the queue (in ns)",
0, G_MAXUINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_BYTES,
g_param_spec_uint ("max-size-bytes", "Max. size (kB)",
"Max. amount of data in the queue (bytes, 0=disable)",
0, G_MAXUINT, DEFAULT_MAX_SIZE_BYTES,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_BUFFERS,
g_param_spec_uint ("max-size-buffers", "Max. size (buffers)",
"Max. number of buffers in the queue (0=disable)", 0, G_MAXUINT,
DEFAULT_MAX_SIZE_BUFFERS,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_TIME,
g_param_spec_uint64 ("max-size-time", "Max. size (ns)",
"Max. amount of data in the queue (in ns, 0=disable)", 0, G_MAXUINT64,
DEFAULT_MAX_SIZE_TIME, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_USE_BUFFERING,
g_param_spec_boolean ("use-buffering", "Use buffering",
"Emit GST_MESSAGE_BUFFERING based on low-/high-percent thresholds",
DEFAULT_USE_BUFFERING, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_USE_RATE_ESTIMATE,
g_param_spec_boolean ("use-rate-estimate", "Use Rate Estimate",
"Estimate the bitrate of the stream to calculate time level",
DEFAULT_USE_RATE_ESTIMATE,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_LOW_PERCENT,
g_param_spec_int ("low-percent", "Low percent",
"Low threshold for buffering to start", 0, 100, DEFAULT_LOW_PERCENT,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_HIGH_PERCENT,
g_param_spec_int ("high-percent", "High percent",
"High threshold for buffering to finish", 0, 100,
DEFAULT_HIGH_PERCENT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_TEMP_TEMPLATE,
g_param_spec_string ("temp-template", "Temporary File Template",
"File template to store temporary files in, should contain directory "
"and XXXXXX. (NULL == disabled)",
NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_TEMP_LOCATION,
g_param_spec_string ("temp-location", "Temporary File Location",
"Location to store temporary files in (Deprecated: Only read this "
"property, use temp-template to configure the name template)",
NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
/**
* GstQueue2:temp-remove
*
* When temp-template is set, remove the temporary file when going to READY.
*
* Since: 0.10.26
*/
g_object_class_install_property (gobject_class, PROP_TEMP_REMOVE,
g_param_spec_boolean ("temp-remove", "Remove the Temporary File",
"Remove the temp-location after use",
DEFAULT_TEMP_REMOVE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
/* set several parent class virtual functions */
gobject_class->finalize = gst_queue2_finalize;
gstelement_class->change_state = GST_DEBUG_FUNCPTR (gst_queue2_change_state);
gstelement_class->query = GST_DEBUG_FUNCPTR (gst_queue2_handle_query);
}
static void
gst_queue2_init (GstQueue2 * queue, GstQueue2Class * g_class)
{
queue->sinkpad = gst_pad_new_from_static_template (&sinktemplate, "sink");
gst_pad_set_chain_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_chain));
gst_pad_set_activatepush_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_sink_activate_push));
gst_pad_set_event_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_handle_sink_event));
gst_pad_set_getcaps_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_getcaps));
gst_pad_set_acceptcaps_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_acceptcaps));
gst_pad_set_bufferalloc_function (queue->sinkpad,
GST_DEBUG_FUNCPTR (gst_queue2_bufferalloc));
gst_element_add_pad (GST_ELEMENT (queue), queue->sinkpad);
queue->srcpad = gst_pad_new_from_static_template (&srctemplate, "src");
gst_pad_set_activatepull_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_src_activate_pull));
gst_pad_set_activatepush_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_src_activate_push));
gst_pad_set_getrange_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_get_range));
gst_pad_set_checkgetrange_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_src_checkgetrange_function));
gst_pad_set_getcaps_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_getcaps));
gst_pad_set_acceptcaps_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_acceptcaps));
gst_pad_set_event_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_handle_src_event));
gst_pad_set_query_function (queue->srcpad,
GST_DEBUG_FUNCPTR (gst_queue2_handle_src_query));
gst_element_add_pad (GST_ELEMENT (queue), queue->srcpad);
/* levels */
GST_QUEUE2_CLEAR_LEVEL (queue->cur_level);
queue->max_level.buffers = DEFAULT_MAX_SIZE_BUFFERS;
queue->max_level.bytes = DEFAULT_MAX_SIZE_BYTES;
queue->max_level.time = DEFAULT_MAX_SIZE_TIME;
queue->max_level.rate_time = DEFAULT_MAX_SIZE_TIME;
queue->use_buffering = DEFAULT_USE_BUFFERING;
queue->use_rate_estimate = DEFAULT_USE_RATE_ESTIMATE;
queue->low_percent = DEFAULT_LOW_PERCENT;
queue->high_percent = DEFAULT_HIGH_PERCENT;
gst_segment_init (&queue->sink_segment, GST_FORMAT_TIME);
gst_segment_init (&queue->src_segment, GST_FORMAT_TIME);
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
queue->is_eos = FALSE;
queue->in_timer = g_timer_new ();
queue->out_timer = g_timer_new ();
queue->qlock = g_mutex_new ();
queue->waiting_add = FALSE;
queue->item_add = g_cond_new ();
queue->waiting_del = FALSE;
queue->item_del = g_cond_new ();
queue->queue = g_queue_new ();
/* tempfile related */
queue->temp_template = NULL;
queue->temp_location = NULL;
queue->temp_location_set = FALSE;
queue->temp_remove = DEFAULT_TEMP_REMOVE;
GST_DEBUG_OBJECT (queue,
"initialized queue's not_empty & not_full conditions");
}
/* called only once, as opposed to dispose */
static void
gst_queue2_finalize (GObject * object)
{
GstQueue2 *queue = GST_QUEUE2 (object);
GST_DEBUG_OBJECT (queue, "finalizing queue");
while (!g_queue_is_empty (queue->queue)) {
GstMiniObject *data = g_queue_pop_head (queue->queue);
gst_mini_object_unref (data);
}
g_queue_free (queue->queue);
g_mutex_free (queue->qlock);
g_cond_free (queue->item_add);
g_cond_free (queue->item_del);
g_timer_destroy (queue->in_timer);
g_timer_destroy (queue->out_timer);
/* temp_file path cleanup */
g_free (queue->temp_template);
g_free (queue->temp_location);
G_OBJECT_CLASS (parent_class)->finalize (object);
}
static void
debug_ranges (GstQueue2 * queue)
{
GstQueue2Range *walk;
for (walk = queue->ranges; walk; walk = walk->next) {
GST_DEBUG_OBJECT (queue, "range %" G_GUINT64_FORMAT "-%" G_GUINT64_FORMAT,
walk->offset, walk->writing_pos);
}
}
/* clear all the downloaded ranges */
static void
clean_ranges (GstQueue2 * queue)
{
GST_DEBUG_OBJECT (queue, "clean queue ranges");
g_slice_free_chain (GstQueue2Range, queue->ranges, next);
queue->ranges = NULL;
queue->current = NULL;
}
/* find a range that contains @offset or NULL when nothing does */
static GstQueue2Range *
find_range (GstQueue2 * queue, guint64 offset, guint64 length)
{
GstQueue2Range *range = NULL;
GstQueue2Range *walk;
/* first do a quick check for the current range */
for (walk = queue->ranges; walk; walk = walk->next) {
if (offset >= walk->offset && offset <= walk->writing_pos) {
/* we can reuse an existing range */
range = walk;
break;
}
}
return range;
}
/* make a new range for @offset or reuse an existing range */
static GstQueue2Range *
add_range (GstQueue2 * queue, guint64 offset)
{
GstQueue2Range *range, *prev, *next;
GST_DEBUG_OBJECT (queue, "find range for %" G_GUINT64_FORMAT, offset);
if ((range = find_range (queue, offset, 0))) {
GST_DEBUG_OBJECT (queue,
"reusing range %" G_GUINT64_FORMAT "-%" G_GUINT64_FORMAT, range->offset,
range->writing_pos);
range->writing_pos = offset;
} else {
GST_DEBUG_OBJECT (queue,
"new range %" G_GUINT64_FORMAT "-%" G_GUINT64_FORMAT, offset, offset);
range = g_slice_new0 (GstQueue2Range);
range->offset = offset;
range->writing_pos = offset;
range->reading_pos = offset;
range->max_reading_pos = offset;
/* insert sorted */
prev = NULL;
next = queue->ranges;
while (next) {
if (next->offset > offset) {
/* insert before next */
GST_DEBUG_OBJECT (queue,
"insert before range %p, offset %" G_GUINT64_FORMAT, next,
next->offset);
break;
}
/* try next */
prev = next;
next = next->next;
}
range->next = next;
if (prev)
prev->next = range;
else
queue->ranges = range;
}
debug_ranges (queue);
return range;
}
/* clear and init the download ranges for offset 0 */
static void
init_ranges (GstQueue2 * queue)
{
GST_DEBUG_OBJECT (queue, "init queue ranges");
/* get rid of all the current ranges */
clean_ranges (queue);
/* make a range for offset 0 */
queue->current = add_range (queue, 0);
}
static gboolean
gst_queue2_acceptcaps (GstPad * pad, GstCaps * caps)
{
GstQueue2 *queue;
GstPad *otherpad;
gboolean result;
queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
otherpad = (pad == queue->srcpad ? queue->sinkpad : queue->srcpad);
result = gst_pad_peer_accept_caps (otherpad, caps);
return result;
}
static GstCaps *
gst_queue2_getcaps (GstPad * pad)
{
GstQueue2 *queue;
GstPad *otherpad;
GstCaps *result;
queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
otherpad = (pad == queue->srcpad ? queue->sinkpad : queue->srcpad);
result = gst_pad_peer_get_caps (otherpad);
if (result == NULL)
result = gst_caps_new_any ();
return result;
}
static GstFlowReturn
gst_queue2_bufferalloc (GstPad * pad, guint64 offset, guint size,
GstCaps * caps, GstBuffer ** buf)
{
GstQueue2 *queue;
GstFlowReturn result;
queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
/* Forward to src pad, without setting caps on the src pad */
result = gst_pad_alloc_buffer (queue->srcpad, offset, size, caps, buf);
return result;
}
/* calculate the diff between running time on the sink and src of the queue.
* This is the total amount of time in the queue. */
static void
update_time_level (GstQueue2 * queue)
{
gint64 sink_time, src_time;
sink_time =
gst_segment_to_running_time (&queue->sink_segment, GST_FORMAT_TIME,
queue->sink_segment.last_stop);
src_time = gst_segment_to_running_time (&queue->src_segment, GST_FORMAT_TIME,
queue->src_segment.last_stop);
GST_DEBUG_OBJECT (queue, "sink %" GST_TIME_FORMAT ", src %" GST_TIME_FORMAT,
GST_TIME_ARGS (sink_time), GST_TIME_ARGS (src_time));
if (sink_time >= src_time)
queue->cur_level.time = sink_time - src_time;
else
queue->cur_level.time = 0;
}
/* take a NEWSEGMENT event and apply the values to segment, updating the time
* level of queue. */
static void
apply_segment (GstQueue2 * queue, GstEvent * event, GstSegment * segment)
{
gboolean update;
GstFormat format;
gdouble rate, arate;
gint64 start, stop, time;
gst_event_parse_new_segment_full (event, &update, &rate, &arate,
&format, &start, &stop, &time);
GST_DEBUG_OBJECT (queue,
"received NEWSEGMENT update %d, rate %lf, applied rate %lf, "
"format %d, "
"%" G_GINT64_FORMAT " -- %" G_GINT64_FORMAT ", time %"
G_GINT64_FORMAT, update, rate, arate, format, start, stop, time);
if (format == GST_FORMAT_BYTES) {
}
/* now configure the values, we use these to track timestamps on the
* sinkpad. */
if (format != GST_FORMAT_TIME) {
/* non-time format, pretent the current time segment is closed with a
* 0 start and unknown stop time. */
update = FALSE;
format = GST_FORMAT_TIME;
start = 0;
stop = -1;
time = 0;
}
gst_segment_set_newsegment_full (segment, update,
rate, arate, format, start, stop, time);
GST_DEBUG_OBJECT (queue,
"configured NEWSEGMENT %" GST_SEGMENT_FORMAT, segment);
/* segment can update the time level of the queue */
update_time_level (queue);
}
/* take a buffer and update segment, updating the time level of the queue. */
static void
apply_buffer (GstQueue2 * queue, GstBuffer * buffer, GstSegment * segment)
{
GstClockTime duration, timestamp;
timestamp = GST_BUFFER_TIMESTAMP (buffer);
duration = GST_BUFFER_DURATION (buffer);
/* if no timestamp is set, assume it's continuous with the previous
* time */
if (timestamp == GST_CLOCK_TIME_NONE)
timestamp = segment->last_stop;
/* add duration */
if (duration != GST_CLOCK_TIME_NONE)
timestamp += duration;
GST_DEBUG_OBJECT (queue, "last_stop updated to %" GST_TIME_FORMAT,
GST_TIME_ARGS (timestamp));
gst_segment_set_last_stop (segment, GST_FORMAT_TIME, timestamp);
/* calc diff with other end */
update_time_level (queue);
}
static void
update_buffering (GstQueue2 * queue)
{
gint64 percent;
gboolean post = FALSE;
if (!queue->use_buffering || queue->high_percent <= 0)
return;
#define GET_PERCENT(format) ((queue->max_level.format) > 0 ? \
(queue->cur_level.format) * 100 / (queue->max_level.format) : 0)
if (queue->is_eos) {
/* on EOS we are always 100% full, we set the var here so that it we can
* reuse the logic below to stop buffering */
percent = 100;
} else {
/* figure out the percent we are filled, we take the max of all formats. */
percent = GET_PERCENT (bytes);
percent = MAX (percent, GET_PERCENT (time));
percent = MAX (percent, GET_PERCENT (buffers));
/* also apply the rate estimate when we need to */
if (queue->use_rate_estimate)
percent = MAX (percent, GET_PERCENT (rate_time));
}
if (queue->is_buffering) {
post = TRUE;
/* if we were buffering see if we reached the high watermark */
if (percent >= queue->high_percent)
queue->is_buffering = FALSE;
} else {
/* we were not buffering, check if we need to start buffering if we drop
* below the low threshold */
if (percent < queue->low_percent) {
queue->is_buffering = TRUE;
queue->buffering_iteration++;
post = TRUE;
}
}
if (post) {
GstMessage *message;
GstBufferingMode mode;
gint64 buffering_left = -1;
/* scale to high percent so that it becomes the 100% mark */
percent = percent * 100 / queue->high_percent;
/* clip */
if (percent > 100)
percent = 100;
queue->buffering_percent = percent;
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
GstFormat fmt = GST_FORMAT_BYTES;
gint64 duration;
mode = GST_BUFFERING_DOWNLOAD;
if (queue->byte_in_rate > 0) {
if (gst_pad_query_peer_duration (queue->sinkpad, &fmt, &duration))
buffering_left =
(gdouble) ((duration -
queue->current->writing_pos) * 1000) / queue->byte_in_rate;
} else {
buffering_left = G_MAXINT64;
}
} else {
mode = GST_BUFFERING_STREAM;
}
GST_DEBUG_OBJECT (queue, "buffering %d percent", (gint) percent);
message = gst_message_new_buffering (GST_OBJECT_CAST (queue),
(gint) percent);
gst_message_set_buffering_stats (message, mode,
queue->byte_in_rate, queue->byte_out_rate, buffering_left);
gst_element_post_message (GST_ELEMENT_CAST (queue), message);
} else {
GST_DEBUG_OBJECT (queue, "filled %d percent", (gint) percent);
}
#undef GET_PERCENT
}
static void
reset_rate_timer (GstQueue2 * queue)
{
queue->bytes_in = 0;
queue->bytes_out = 0;
queue->byte_in_rate = 0.0;
queue->byte_out_rate = 0.0;
queue->last_in_elapsed = 0.0;
queue->last_out_elapsed = 0.0;
queue->in_timer_started = FALSE;
queue->out_timer_started = FALSE;
}
/* the interval in seconds to recalculate the rate */
#define RATE_INTERVAL 0.2
/* Tuning for rate estimation. We use a large window for the input rate because
* it should be stable when connected to a network. The output rate is less
* stable (the elements preroll, queues behind a demuxer fill, ...) and should
* therefore adapt more quickly. */
#define AVG_IN(avg,val) ((avg) * 15.0 + (val)) / 16.0
#define AVG_OUT(avg,val) ((avg) * 3.0 + (val)) / 4.0
static void
update_in_rates (GstQueue2 * queue)
{
gdouble elapsed, period;
gdouble byte_in_rate;
if (!queue->in_timer_started) {
queue->in_timer_started = TRUE;
g_timer_start (queue->in_timer);
return;
}
elapsed = g_timer_elapsed (queue->in_timer, NULL);
/* recalc after each interval. */
if (queue->last_in_elapsed + RATE_INTERVAL < elapsed) {
period = elapsed - queue->last_in_elapsed;
GST_DEBUG_OBJECT (queue,
"rates: period %f, in %" G_GUINT64_FORMAT, period, queue->bytes_in);
byte_in_rate = queue->bytes_in / period;
if (queue->byte_in_rate == 0.0)
queue->byte_in_rate = byte_in_rate;
else
queue->byte_in_rate = AVG_IN (queue->byte_in_rate, byte_in_rate);
/* reset the values to calculate rate over the next interval */
queue->last_in_elapsed = elapsed;
queue->bytes_in = 0;
}
if (queue->byte_in_rate > 0.0) {
queue->cur_level.rate_time =
queue->cur_level.bytes / queue->byte_in_rate * GST_SECOND;
}
GST_DEBUG_OBJECT (queue, "rates: in %f, time %" GST_TIME_FORMAT,
queue->byte_in_rate, GST_TIME_ARGS (queue->cur_level.rate_time));
}
static void
update_out_rates (GstQueue2 * queue)
{
gdouble elapsed, period;
gdouble byte_out_rate;
if (!queue->out_timer_started) {
queue->out_timer_started = TRUE;
g_timer_start (queue->out_timer);
return;
}
elapsed = g_timer_elapsed (queue->out_timer, NULL);
/* recalc after each interval. */
if (queue->last_out_elapsed + RATE_INTERVAL < elapsed) {
period = elapsed - queue->last_out_elapsed;
GST_DEBUG_OBJECT (queue,
"rates: period %f, out %" G_GUINT64_FORMAT, period, queue->bytes_out);
byte_out_rate = queue->bytes_out / period;
if (queue->byte_out_rate == 0.0)
queue->byte_out_rate = byte_out_rate;
else
queue->byte_out_rate = AVG_OUT (queue->byte_out_rate, byte_out_rate);
/* reset the values to calculate rate over the next interval */
queue->last_out_elapsed = elapsed;
queue->bytes_out = 0;
}
if (queue->byte_in_rate > 0.0) {
queue->cur_level.rate_time =
queue->cur_level.bytes / queue->byte_in_rate * GST_SECOND;
}
GST_DEBUG_OBJECT (queue, "rates: out %f, time %" GST_TIME_FORMAT,
queue->byte_out_rate, GST_TIME_ARGS (queue->cur_level.rate_time));
}
static void
update_cur_level (GstQueue2 * queue, GstQueue2Range * range)
{
guint64 max_reading_pos, writing_pos;
writing_pos = range->writing_pos;
max_reading_pos = range->max_reading_pos;
if (writing_pos > max_reading_pos)
queue->cur_level.bytes = writing_pos - max_reading_pos;
else
queue->cur_level.bytes = 0;
}
static gboolean
gst_queue2_write_buffer_to_file (GstQueue2 * queue, GstBuffer * buffer)
{
guint size;
guint8 *data;
guint64 writing_pos, max_reading_pos;
GstQueue2Range *next;
writing_pos = queue->current->writing_pos;
max_reading_pos = queue->current->max_reading_pos;
#ifdef HAVE_FSEEKO
fseeko (queue->temp_file, (off_t) writing_pos, SEEK_SET);
#elif defined (G_OS_UNIX) || defined (G_OS_WIN32)
lseek (fileno (queue->temp_file), (off_t) writing_pos, SEEK_SET);
#else
fseek (queue->temp_file, writing_pos, SEEK_SET);
#endif
data = GST_BUFFER_DATA (buffer);
size = GST_BUFFER_SIZE (buffer);
if (fwrite (data, size, 1, queue->temp_file) != 1)
goto handle_error;
writing_pos += size;
GST_INFO_OBJECT (queue,
"writing %" G_GUINT64_FORMAT ", max_reading %" G_GUINT64_FORMAT,
writing_pos, max_reading_pos);
if (writing_pos > max_reading_pos)
queue->cur_level.bytes = writing_pos - max_reading_pos;
else
queue->cur_level.bytes = 0;
/* try to merge with next range */
while ((next = queue->current->next)) {
GST_INFO_OBJECT (queue,
"checking merge with next range %" G_GUINT64_FORMAT " < %"
G_GUINT64_FORMAT, writing_pos, next->offset);
if (writing_pos < next->offset)
break;
GST_DEBUG_OBJECT (queue, "merging ranges %" G_GUINT64_FORMAT,
next->writing_pos);
/* remove the group, we could choose to not read the data in this range
* again. This would involve us doing a seek to the current writing position
* in the range. FIXME, It would probably make sense to do a seek when there
* is a lot of data in the range we merged with to avoid reading it all
* again. */
queue->current->next = next->next;
g_slice_free (GstQueue2Range, next);
debug_ranges (queue);
}
queue->current->writing_pos = writing_pos;
return TRUE;
/* ERRORS */
handle_error:
{
switch (errno) {
case ENOSPC:{
GST_ELEMENT_ERROR (queue, RESOURCE, NO_SPACE_LEFT, (NULL), (NULL));
break;
}
default:{
GST_ELEMENT_ERROR (queue, RESOURCE, WRITE,
(_("Error while writing to download file.")),
("%s", g_strerror (errno)));
}
}
return FALSE;
}
}
static void
update_cur_pos (GstQueue2 * queue, GstQueue2Range * range, guint64 pos)
{
guint64 reading_pos, max_reading_pos;
reading_pos = pos;
max_reading_pos = range->max_reading_pos;
max_reading_pos = MAX (max_reading_pos, reading_pos);
range->max_reading_pos = max_reading_pos;
update_cur_level (queue, range);
}
static gboolean
perform_seek_to_offset (GstQueue2 * queue, guint64 offset)
{
GstEvent *event;
gboolean res;
GST_DEBUG_OBJECT (queue, "Seeking to %" G_GUINT64_FORMAT, offset);
event =
gst_event_new_seek (1.0, GST_FORMAT_BYTES,
GST_SEEK_FLAG_FLUSH | GST_SEEK_FLAG_ACCURATE, GST_SEEK_TYPE_SET, offset,
GST_SEEK_TYPE_NONE, -1);
GST_QUEUE2_MUTEX_UNLOCK (queue);
res = gst_pad_push_event (queue->sinkpad, event);
GST_QUEUE2_MUTEX_LOCK (queue);
if (res) {
queue->current = add_range (queue, offset);
/* update the stats for this range */
update_cur_level (queue, queue->current);
}
return res;
}
/* see if there is enough data in the file to read a full buffer */
static gboolean
gst_queue2_have_data (GstQueue2 * queue, guint64 offset, guint length)
{
GstQueue2Range *range;
GST_DEBUG_OBJECT (queue, "looking for offset %" G_GUINT64_FORMAT ", len %u",
offset, length);
if ((range = find_range (queue, offset, length))) {
if (queue->current != range) {
GST_DEBUG_OBJECT (queue, "switching ranges, do seek to range position");
perform_seek_to_offset (queue, range->writing_pos);
}
/* update the current reading position in the range */
update_cur_pos (queue, queue->current, offset + length);
/* we have a range for offset */
GST_DEBUG_OBJECT (queue,
"we have a range %p, offset %" G_GUINT64_FORMAT ", writing_pos %"
G_GUINT64_FORMAT, range, range->offset, range->writing_pos);
if (queue->is_eos)
return TRUE;
if (offset + length < range->writing_pos)
return TRUE;
} else {
GST_INFO_OBJECT (queue, "not found in any range");
/* we don't have the range, see how far away we are, FIXME, find a good
* threshold based on the incomming rate. */
if (!queue->is_eos && queue->current) {
if (offset < queue->current->writing_pos + 200000) {
update_cur_pos (queue, queue->current, offset + length);
GST_INFO_OBJECT (queue, "wait for data");
return FALSE;
}
}
/* too far away, do a seek */
perform_seek_to_offset (queue, offset);
}
return FALSE;
}
static GstFlowReturn
gst_queue2_create_read (GstQueue2 * queue, guint64 offset, guint length,
GstBuffer ** buffer)
{
size_t res;
GstBuffer *buf;
/* check if we have enough data at @offset. If there is not enough data, we
* block and wait. */
while (!gst_queue2_have_data (queue, offset, length)) {
GST_QUEUE2_WAIT_ADD_CHECK (queue, queue->srcresult, out_flushing);
}
#ifdef HAVE_FSEEKO
if (fseeko (queue->temp_file, (off_t) offset, SEEK_SET) != 0)
goto seek_failed;
#elif defined (G_OS_UNIX) || defined (G_OS_WIN32)
if (lseek (fileno (queue->temp_file), (off_t) offset,
SEEK_SET) == (off_t) - 1)
goto seek_failed;
#else
if (fseek (queue->temp_file, (long) offset, SEEK_SET) != 0)
goto seek_failed;
#endif
buf = gst_buffer_new_and_alloc (length);
/* this should not block */
GST_LOG_OBJECT (queue, "Reading %d bytes", length);
res = fread (GST_BUFFER_DATA (buf), 1, length, queue->temp_file);
GST_LOG_OBJECT (queue, "read %" G_GSIZE_FORMAT " bytes", res);
if (G_UNLIKELY (res == 0)) {
/* check for errors or EOF */
if (ferror (queue->temp_file))
goto could_not_read;
if (feof (queue->temp_file) && length > 0)
goto eos;
}
length = res;
GST_BUFFER_SIZE (buf) = length;
GST_BUFFER_OFFSET (buf) = offset;
GST_BUFFER_OFFSET_END (buf) = offset + length;
*buffer = buf;
return GST_FLOW_OK;
/* ERRORS */
out_flushing:
{
GST_DEBUG_OBJECT (queue, "we are flushing");
return GST_FLOW_WRONG_STATE;
}
seek_failed:
{
GST_ELEMENT_ERROR (queue, RESOURCE, READ, (NULL), GST_ERROR_SYSTEM);
return GST_FLOW_ERROR;
}
could_not_read:
{
GST_ELEMENT_ERROR (queue, RESOURCE, READ, (NULL), GST_ERROR_SYSTEM);
gst_buffer_unref (buf);
return GST_FLOW_ERROR;
}
eos:
{
GST_DEBUG ("non-regular file hits EOS");
gst_buffer_unref (buf);
return GST_FLOW_UNEXPECTED;
}
}
/* should be called with QUEUE_LOCK */
static GstMiniObject *
gst_queue2_read_item_from_file (GstQueue2 * queue)
{
GstMiniObject *item;
if (queue->starting_segment != NULL) {
item = GST_MINI_OBJECT_CAST (queue->starting_segment);
queue->starting_segment = NULL;
} else {
GstFlowReturn ret;
GstBuffer *buffer;
guint64 reading_pos;
reading_pos = queue->current->reading_pos;
ret =
gst_queue2_create_read (queue, reading_pos, DEFAULT_BUFFER_SIZE,
&buffer);
switch (ret) {
case GST_FLOW_OK:
item = GST_MINI_OBJECT_CAST (buffer);
break;
case GST_FLOW_UNEXPECTED:
item = GST_MINI_OBJECT_CAST (gst_event_new_eos ());
break;
default:
item = NULL;
break;
}
}
return item;
}
static gboolean
gst_queue2_open_temp_location_file (GstQueue2 * queue)
{
gint fd = -1;
gchar *name = NULL;
if (queue->temp_file)
goto already_opened;
GST_DEBUG_OBJECT (queue, "opening temp file %s", queue->temp_template);
/* we have two cases:
* - temp_location was set to something !NULL (Deprecated). in this case we
* open the specified filename.
* - temp_template was set, allocate a filename and open that filename
*/
if (!queue->temp_location_set) {
/* nothing to do */
if (queue->temp_template == NULL)
goto no_directory;
/* make copy of the template, we don't want to change this */
name = g_strdup (queue->temp_template);
fd = g_mkstemp (name);
if (fd == -1)
goto mkstemp_failed;
/* open the file for update/writing */
queue->temp_file = fdopen (fd, "wb+");
/* error creating file */
if (queue->temp_file == NULL)
goto open_failed;
g_free (queue->temp_location);
queue->temp_location = name;
g_object_notify (G_OBJECT (queue), "temp-location");
} else {
/* open the file for update/writing, this is deprecated but we still need to
* support it for API/ABI compatibility */
queue->temp_file = g_fopen (queue->temp_location, "wb+");
/* error creating file */
if (queue->temp_file == NULL)
goto open_failed;
}
GST_DEBUG_OBJECT (queue, "opened temp file %s", queue->temp_template);
init_ranges (queue);
return TRUE;
/* ERRORS */
already_opened:
{
GST_DEBUG_OBJECT (queue, "temp file was already open");
return TRUE;
}
no_directory:
{
GST_ELEMENT_ERROR (queue, RESOURCE, NOT_FOUND,
(_("No Temp directory specified.")), (NULL));
return FALSE;
}
mkstemp_failed:
{
GST_ELEMENT_ERROR (queue, RESOURCE, OPEN_READ,
(_("Could not create temp file \"%s\"."), queue->temp_template),
GST_ERROR_SYSTEM);
g_free (name);
return FALSE;
}
open_failed:
{
GST_ELEMENT_ERROR (queue, RESOURCE, OPEN_READ,
(_("Could not open file \"%s\" for reading."), name), GST_ERROR_SYSTEM);
g_free (name);
if (fd != -1)
close (fd);
return FALSE;
}
}
static void
gst_queue2_close_temp_location_file (GstQueue2 * queue)
{
/* nothing to do */
if (queue->temp_file == NULL)
return;
GST_DEBUG_OBJECT (queue, "closing temp file");
fflush (queue->temp_file);
fclose (queue->temp_file);
if (queue->temp_remove)
remove (queue->temp_location);
queue->temp_file = NULL;
clean_ranges (queue);
}
static void
gst_queue2_flush_temp_file (GstQueue2 * queue)
{
if (queue->temp_file == NULL)
return;
GST_DEBUG_OBJECT (queue, "flushing temp file");
queue->temp_file = g_freopen (queue->temp_location, "wb+", queue->temp_file);
init_ranges (queue);
}
static void
gst_queue2_locked_flush (GstQueue2 * queue)
{
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
gst_queue2_flush_temp_file (queue);
} else {
while (!g_queue_is_empty (queue->queue)) {
GstMiniObject *data = g_queue_pop_head (queue->queue);
/* Then lose another reference because we are supposed to destroy that
data when flushing */
gst_mini_object_unref (data);
}
}
GST_QUEUE2_CLEAR_LEVEL (queue->cur_level);
gst_segment_init (&queue->sink_segment, GST_FORMAT_TIME);
gst_segment_init (&queue->src_segment, GST_FORMAT_TIME);
if (queue->starting_segment != NULL)
gst_event_unref (queue->starting_segment);
queue->starting_segment = NULL;
queue->segment_event_received = FALSE;
/* we deleted a lot of something */
GST_QUEUE2_SIGNAL_DEL (queue);
}
/* enqueue an item an update the level stats */
static void
gst_queue2_locked_enqueue (GstQueue2 * queue, gpointer item)
{
if (GST_IS_BUFFER (item)) {
GstBuffer *buffer;
guint size;
buffer = GST_BUFFER_CAST (item);
size = GST_BUFFER_SIZE (buffer);
/* add buffer to the statistics */
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
queue->cur_level.buffers++;
queue->cur_level.bytes += size;
}
queue->bytes_in += size;
/* apply new buffer to segment stats */
apply_buffer (queue, buffer, &queue->sink_segment);
/* update the byterate stats */
update_in_rates (queue);
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
gst_queue2_write_buffer_to_file (queue, buffer);
}
} else if (GST_IS_EVENT (item)) {
GstEvent *event;
event = GST_EVENT_CAST (item);
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_EOS:
/* Zero the thresholds, this makes sure the queue is completely
* filled and we can read all data from the queue. */
GST_DEBUG_OBJECT (queue, "we have EOS");
queue->is_eos = TRUE;
break;
case GST_EVENT_NEWSEGMENT:
apply_segment (queue, event, &queue->sink_segment);
/* This is our first new segment, we hold it
* as we can't save it on the temp file */
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
if (queue->segment_event_received)
goto unexpected_event;
queue->segment_event_received = TRUE;
if (queue->starting_segment != NULL)
gst_event_unref (queue->starting_segment);
queue->starting_segment = event;
item = NULL;
}
/* a new segment allows us to accept more buffers if we got UNEXPECTED
* from downstream */
queue->unexpected = FALSE;
break;
default:
if (QUEUE_IS_USING_TEMP_FILE (queue))
goto unexpected_event;
break;
}
} else {
g_warning ("Unexpected item %p added in queue %s (refcounting problem?)",
item, GST_OBJECT_NAME (queue));
/* we can't really unref since we don't know what it is */
item = NULL;
}
if (item) {
/* update the buffering status */
update_buffering (queue);
if (!QUEUE_IS_USING_TEMP_FILE (queue))
g_queue_push_tail (queue->queue, item);
else
gst_mini_object_unref (GST_MINI_OBJECT_CAST (item));
GST_QUEUE2_SIGNAL_ADD (queue);
}
return;
/* ERRORS */
unexpected_event:
{
g_warning
("Unexpected event of kind %s can't be added in temp file of queue %s ",
gst_event_type_get_name (GST_EVENT_TYPE (item)),
GST_OBJECT_NAME (queue));
gst_event_unref (GST_EVENT_CAST (item));
return;
}
}
/* dequeue an item from the queue and update level stats */
static GstMiniObject *
gst_queue2_locked_dequeue (GstQueue2 * queue)
{
GstMiniObject *item;
if (QUEUE_IS_USING_TEMP_FILE (queue))
item = gst_queue2_read_item_from_file (queue);
else
item = g_queue_pop_head (queue->queue);
if (item == NULL)
goto no_item;
if (GST_IS_BUFFER (item)) {
GstBuffer *buffer;
guint size;
buffer = GST_BUFFER_CAST (item);
size = GST_BUFFER_SIZE (buffer);
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"retrieved buffer %p from queue", buffer);
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
queue->cur_level.buffers--;
queue->cur_level.bytes -= size;
}
queue->bytes_out += size;
apply_buffer (queue, buffer, &queue->src_segment);
/* update the byterate stats */
update_out_rates (queue);
/* update the buffering */
update_buffering (queue);
} else if (GST_IS_EVENT (item)) {
GstEvent *event = GST_EVENT_CAST (item);
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"retrieved event %p from queue", event);
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_EOS:
/* queue is empty now that we dequeued the EOS */
GST_QUEUE2_CLEAR_LEVEL (queue->cur_level);
break;
case GST_EVENT_NEWSEGMENT:
apply_segment (queue, event, &queue->src_segment);
break;
default:
break;
}
} else {
g_warning
("Unexpected item %p dequeued from queue %s (refcounting problem?)",
item, GST_OBJECT_NAME (queue));
item = NULL;
}
GST_QUEUE2_SIGNAL_DEL (queue);
return item;
/* ERRORS */
no_item:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "the queue is empty");
return NULL;
}
}
static gboolean
gst_queue2_handle_sink_event (GstPad * pad, GstEvent * event)
{
GstQueue2 *queue;
queue = GST_QUEUE2 (GST_OBJECT_PARENT (pad));
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_FLUSH_START:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "received flush start event");
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
/* forward event */
gst_pad_push_event (queue->srcpad, event);
/* now unblock the chain function */
GST_QUEUE2_MUTEX_LOCK (queue);
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
/* unblock the loop and chain functions */
GST_QUEUE2_SIGNAL_ADD (queue);
GST_QUEUE2_SIGNAL_DEL (queue);
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* make sure it pauses, this should happen since we sent
* flush_start downstream. */
gst_pad_pause_task (queue->srcpad);
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "loop stopped");
}
goto done;
}
case GST_EVENT_FLUSH_STOP:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "received flush stop event");
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
/* forward event */
gst_pad_push_event (queue->srcpad, event);
GST_QUEUE2_MUTEX_LOCK (queue);
gst_queue2_locked_flush (queue);
queue->srcresult = GST_FLOW_OK;
queue->sinkresult = GST_FLOW_OK;
queue->is_eos = FALSE;
queue->unexpected = FALSE;
/* reset rate counters */
reset_rate_timer (queue);
gst_pad_start_task (queue->srcpad, (GstTaskFunction) gst_queue2_loop,
queue->srcpad);
GST_QUEUE2_MUTEX_UNLOCK (queue);
} else {
GST_QUEUE2_MUTEX_LOCK (queue);
queue->segment_event_received = FALSE;
queue->is_eos = FALSE;
queue->unexpected = FALSE;
GST_QUEUE2_MUTEX_UNLOCK (queue);
}
goto done;
}
default:
if (GST_EVENT_IS_SERIALIZED (event)) {
/* serialized events go in the queue */
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->sinkresult, out_flushing);
/* refuse more events on EOS */
if (queue->is_eos)
goto out_eos;
gst_queue2_locked_enqueue (queue, event);
GST_QUEUE2_MUTEX_UNLOCK (queue);
} else {
/* non-serialized events are passed upstream. */
gst_pad_push_event (queue->srcpad, event);
}
break;
}
done:
return TRUE;
/* ERRORS */
out_flushing:
{
GST_DEBUG_OBJECT (queue, "refusing event, we are flushing");
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_event_unref (event);
return FALSE;
}
out_eos:
{
GST_DEBUG_OBJECT (queue, "refusing event, we are EOS");
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_event_unref (event);
return FALSE;
}
}
static gboolean
gst_queue2_is_empty (GstQueue2 * queue)
{
/* never empty on EOS */
if (queue->is_eos)
return FALSE;
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
return queue->current->writing_pos == queue->current->max_reading_pos;
} else {
if (queue->queue->length == 0)
return TRUE;
}
return FALSE;
}
static gboolean
gst_queue2_is_filled (GstQueue2 * queue)
{
gboolean res;
/* always filled on EOS */
if (queue->is_eos)
return TRUE;
/* if using file, we're never filled if we don't have EOS */
if (QUEUE_IS_USING_TEMP_FILE (queue))
return FALSE;
/* we are never filled when we have no buffers at all */
if (queue->cur_level.buffers == 0)
return FALSE;
#define CHECK_FILLED(format) ((queue->max_level.format) > 0 && \
(queue->cur_level.format) >= (queue->max_level.format))
/* we are filled if one of the current levels exceeds the max */
res = CHECK_FILLED (buffers) || CHECK_FILLED (bytes) || CHECK_FILLED (time);
/* if we need to, use the rate estimate to check against the max time we are
* allowed to queue */
if (queue->use_rate_estimate)
res |= CHECK_FILLED (rate_time);
#undef CHECK_FILLED
return res;
}
static GstFlowReturn
gst_queue2_chain (GstPad * pad, GstBuffer * buffer)
{
GstQueue2 *queue;
queue = GST_QUEUE2 (GST_OBJECT_PARENT (pad));
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"received buffer %p of size %d, time %" GST_TIME_FORMAT ", duration %"
GST_TIME_FORMAT, buffer, GST_BUFFER_SIZE (buffer),
GST_TIME_ARGS (GST_BUFFER_TIMESTAMP (buffer)),
GST_TIME_ARGS (GST_BUFFER_DURATION (buffer)));
/* we have to lock the queue since we span threads */
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->sinkresult, out_flushing);
/* when we received EOS, we refuse more data */
if (queue->is_eos)
goto out_eos;
/* when we received unexpected from downstream, refuse more buffers */
if (queue->unexpected)
goto out_unexpected;
/* We make space available if we're "full" according to whatever
* the user defined as "full". */
if (gst_queue2_is_filled (queue)) {
gboolean started;
/* pause the timer while we wait. The fact that we are waiting does not mean
* the byterate on the input pad is lower */
if ((started = queue->in_timer_started))
g_timer_stop (queue->in_timer);
GST_CAT_DEBUG_OBJECT (queue_dataflow, queue,
"queue is full, waiting for free space");
do {
/* Wait for space to be available, we could be unlocked because of a flush. */
GST_QUEUE2_WAIT_DEL_CHECK (queue, queue->sinkresult, out_flushing);
}
while (gst_queue2_is_filled (queue));
/* and continue if we were running before */
if (started)
g_timer_continue (queue->in_timer);
}
/* put buffer in queue now */
gst_queue2_locked_enqueue (queue, buffer);
GST_QUEUE2_MUTEX_UNLOCK (queue);
return GST_FLOW_OK;
/* special conditions */
out_flushing:
{
GstFlowReturn ret = queue->sinkresult;
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"exit because task paused, reason: %s", gst_flow_get_name (ret));
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_buffer_unref (buffer);
return ret;
}
out_eos:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "exit because we received EOS");
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_buffer_unref (buffer);
return GST_FLOW_UNEXPECTED;
}
out_unexpected:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"exit because we received UNEXPECTED");
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_buffer_unref (buffer);
return GST_FLOW_UNEXPECTED;
}
}
/* dequeue an item from the queue an push it downstream. This functions returns
* the result of the push. */
static GstFlowReturn
gst_queue2_push_one (GstQueue2 * queue)
{
GstFlowReturn result = GST_FLOW_OK;
GstMiniObject *data;
data = gst_queue2_locked_dequeue (queue);
if (data == NULL)
goto no_item;
next:
if (GST_IS_BUFFER (data)) {
GstBuffer *buffer;
GstCaps *caps;
buffer = GST_BUFFER_CAST (data);
caps = GST_BUFFER_CAPS (buffer);
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* set caps before pushing the buffer so that core does not try to do
* something fancy to check if this is possible. */
if (caps && caps != GST_PAD_CAPS (queue->srcpad))
gst_pad_set_caps (queue->srcpad, caps);
result = gst_pad_push (queue->srcpad, buffer);
/* need to check for srcresult here as well */
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->srcresult, out_flushing);
if (result == GST_FLOW_UNEXPECTED) {
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"got UNEXPECTED from downstream");
/* stop pushing buffers, we dequeue all items until we see an item that we
* can push again, which is EOS or NEWSEGMENT. If there is nothing in the
* queue we can push, we set a flag to make the sinkpad refuse more
* buffers with an UNEXPECTED return value until we receive something
* pushable again or we get flushed. */
while ((data = gst_queue2_locked_dequeue (queue))) {
if (GST_IS_BUFFER (data)) {
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"dropping UNEXPECTED buffer %p", data);
gst_buffer_unref (GST_BUFFER_CAST (data));
} else if (GST_IS_EVENT (data)) {
GstEvent *event = GST_EVENT_CAST (data);
GstEventType type = GST_EVENT_TYPE (event);
if (type == GST_EVENT_EOS || type == GST_EVENT_NEWSEGMENT) {
/* we found a pushable item in the queue, push it out */
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"pushing pushable event %s after UNEXPECTED",
GST_EVENT_TYPE_NAME (event));
goto next;
}
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"dropping UNEXPECTED event %p", event);
gst_event_unref (event);
}
}
/* no more items in the queue. Set the unexpected flag so that upstream
* make us refuse any more buffers on the sinkpad. Since we will still
* accept EOS and NEWSEGMENT we return _FLOW_OK to the caller so that the
* task function does not shut down. */
queue->unexpected = TRUE;
result = GST_FLOW_OK;
}
} else if (GST_IS_EVENT (data)) {
GstEvent *event = GST_EVENT_CAST (data);
GstEventType type = GST_EVENT_TYPE (event);
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_pad_push_event (queue->srcpad, event);
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->srcresult, out_flushing);
/* if we're EOS, return UNEXPECTED so that the task pauses. */
if (type == GST_EVENT_EOS) {
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"pushed EOS event %p, return UNEXPECTED", event);
result = GST_FLOW_UNEXPECTED;
}
}
return result;
/* ERRORS */
no_item:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"exit because we have no item in the queue");
return GST_FLOW_ERROR;
}
out_flushing:
{
GST_CAT_LOG_OBJECT (queue_dataflow, queue, "exit because we are flushing");
return GST_FLOW_WRONG_STATE;
}
}
/* called repeadedly with @pad as the source pad. This function should push out
* data to the peer element. */
static void
gst_queue2_loop (GstPad * pad)
{
GstQueue2 *queue;
GstFlowReturn ret;
queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
/* have to lock for thread-safety */
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->srcresult, out_flushing);
if (gst_queue2_is_empty (queue)) {
gboolean started;
/* pause the timer while we wait. The fact that we are waiting does not mean
* the byterate on the output pad is lower */
if ((started = queue->out_timer_started))
g_timer_stop (queue->out_timer);
GST_CAT_DEBUG_OBJECT (queue_dataflow, queue,
"queue is empty, waiting for new data");
do {
/* Wait for data to be available, we could be unlocked because of a flush. */
GST_QUEUE2_WAIT_ADD_CHECK (queue, queue->srcresult, out_flushing);
}
while (gst_queue2_is_empty (queue));
/* and continue if we were running before */
if (started)
g_timer_continue (queue->out_timer);
}
ret = gst_queue2_push_one (queue);
queue->srcresult = ret;
queue->sinkresult = ret;
if (ret != GST_FLOW_OK)
goto out_flushing;
GST_QUEUE2_MUTEX_UNLOCK (queue);
return;
/* ERRORS */
out_flushing:
{
gboolean eos = queue->is_eos;
GstFlowReturn ret = queue->srcresult;
gst_pad_pause_task (queue->srcpad);
GST_CAT_LOG_OBJECT (queue_dataflow, queue,
"pause task, reason: %s", gst_flow_get_name (queue->srcresult));
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* let app know about us giving up if upstream is not expected to do so */
/* UNEXPECTED is already taken care of elsewhere */
if (eos && (GST_FLOW_IS_FATAL (ret) || ret == GST_FLOW_NOT_LINKED) &&
(ret != GST_FLOW_UNEXPECTED)) {
GST_ELEMENT_ERROR (queue, STREAM, FAILED,
(_("Internal data flow error.")),
("streaming task paused, reason %s (%d)",
gst_flow_get_name (ret), ret));
gst_pad_push_event (queue->srcpad, gst_event_new_eos ());
}
return;
}
}
static gboolean
gst_queue2_handle_src_event (GstPad * pad, GstEvent * event)
{
gboolean res = TRUE;
GstQueue2 *queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
#ifndef GST_DISABLE_GST_DEBUG
GST_CAT_DEBUG_OBJECT (queue_dataflow, queue, "got event %p (%s)",
event, GST_EVENT_TYPE_NAME (event));
#endif
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_FLUSH_START:
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
/* just forward upstream */
res = gst_pad_push_event (queue->sinkpad, event);
} else {
/* now unblock the getrange function */
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "flushing");
queue->srcresult = GST_FLOW_WRONG_STATE;
GST_QUEUE2_SIGNAL_ADD (queue);
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* when using a temp file, we eat the event */
res = TRUE;
gst_event_unref (event);
}
break;
case GST_EVENT_FLUSH_STOP:
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
/* just forward upstream */
res = gst_pad_push_event (queue->sinkpad, event);
} else {
/* now unblock the getrange function */
GST_QUEUE2_MUTEX_LOCK (queue);
queue->srcresult = GST_FLOW_OK;
if (queue->current)
queue->current->max_reading_pos = 0;
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* when using a temp file, we eat the event */
res = TRUE;
gst_event_unref (event);
}
break;
default:
res = gst_pad_push_event (queue->sinkpad, event);
break;
}
return res;
}
static gboolean
gst_queue2_peer_query (GstQueue2 * queue, GstPad * pad, GstQuery * query)
{
gboolean ret = FALSE;
GstPad *peer;
if ((peer = gst_pad_get_peer (pad))) {
ret = gst_pad_query (peer, query);
gst_object_unref (peer);
}
return ret;
}
static gboolean
gst_queue2_handle_src_query (GstPad * pad, GstQuery * query)
{
GstQueue2 *queue;
queue = GST_QUEUE2 (GST_PAD_PARENT (pad));
switch (GST_QUERY_TYPE (query)) {
case GST_QUERY_POSITION:
{
gint64 peer_pos;
GstFormat format;
if (!gst_queue2_peer_query (queue, queue->sinkpad, query))
goto peer_failed;
/* get peer position */
gst_query_parse_position (query, &format, &peer_pos);
/* FIXME: this code assumes that there's no discont in the queue */
switch (format) {
case GST_FORMAT_BYTES:
peer_pos -= queue->cur_level.bytes;
break;
case GST_FORMAT_TIME:
peer_pos -= queue->cur_level.time;
break;
default:
GST_WARNING_OBJECT (queue, "dropping query in %s format, don't "
"know how to adjust value", gst_format_get_name (format));
return FALSE;
}
/* set updated position */
gst_query_set_position (query, format, peer_pos);
break;
}
case GST_QUERY_DURATION:
{
GST_DEBUG_OBJECT (queue, "doing peer query");
if (!gst_queue2_peer_query (queue, queue->sinkpad, query))
goto peer_failed;
GST_DEBUG_OBJECT (queue, "peer query success");
break;
}
case GST_QUERY_BUFFERING:
{
GstFormat format;
GST_DEBUG_OBJECT (queue, "query buffering");
if (!QUEUE_IS_USING_TEMP_FILE (queue)) {
/* no temp file, just forward to the peer */
if (!gst_queue2_peer_query (queue, queue->sinkpad, query))
goto peer_failed;
GST_DEBUG_OBJECT (queue, "buffering forwarded to peer");
} else {
gint64 start, stop;
guint64 writing_pos;
gint percent;
gint64 estimated_total, buffering_left;
GstFormat peer_fmt;
gint64 duration;
gboolean peer_res, is_buffering, is_eos;
gdouble byte_in_rate, byte_out_rate;
/* we need a current download region */
if (queue->current == NULL)
return FALSE;
writing_pos = queue->current->writing_pos;
byte_in_rate = queue->byte_in_rate;
byte_out_rate = queue->byte_out_rate;
is_buffering = queue->is_buffering;
is_eos = queue->is_eos;
percent = queue->buffering_percent;
if (is_eos) {
/* we're EOS, we know the duration in bytes now */
peer_res = TRUE;
duration = writing_pos;
} else {
/* get duration of upstream in bytes */
peer_fmt = GST_FORMAT_BYTES;
peer_res = gst_pad_query_peer_duration (queue->sinkpad, &peer_fmt,
&duration);
}
/* calculate remaining and total download time */
if (peer_res && byte_in_rate > 0.0) {
estimated_total = (duration * 1000) / byte_in_rate;
buffering_left = ((duration - writing_pos) * 1000) / byte_in_rate;
} else {
estimated_total = -1;
buffering_left = -1;
}
GST_DEBUG_OBJECT (queue, "estimated %" G_GINT64_FORMAT ", left %"
G_GINT64_FORMAT, estimated_total, buffering_left);
gst_query_parse_buffering_range (query, &format, NULL, NULL, NULL);
switch (format) {
case GST_FORMAT_PERCENT:
/* we need duration */
if (!peer_res)
goto peer_failed;
GST_DEBUG_OBJECT (queue, "duration %" G_GINT64_FORMAT ", writing %"
G_GINT64_FORMAT, duration, writing_pos);
start = 0;
/* get our available data relative to the duration */
if (duration != -1)
stop = GST_FORMAT_PERCENT_MAX * writing_pos / duration;
else
stop = -1;
break;
case GST_FORMAT_BYTES:
start = 0;
stop = writing_pos;
break;
default:
start = -1;
stop = -1;
break;
}
gst_query_set_buffering_percent (query, is_buffering, percent);
gst_query_set_buffering_range (query, format, start, stop,
estimated_total);
gst_query_set_buffering_stats (query, GST_BUFFERING_DOWNLOAD,
byte_in_rate, byte_out_rate, buffering_left);
}
break;
}
default:
/* peer handled other queries */
if (!gst_queue2_peer_query (queue, queue->sinkpad, query))
goto peer_failed;
break;
}
return TRUE;
/* ERRORS */
peer_failed:
{
GST_DEBUG_OBJECT (queue, "failed peer query");
return FALSE;
}
}
static gboolean
gst_queue2_handle_query (GstElement * element, GstQuery * query)
{
/* simply forward to the srcpad query function */
return gst_queue2_handle_src_query (GST_QUEUE2_CAST (element)->srcpad, query);
}
static GstFlowReturn
gst_queue2_get_range (GstPad * pad, guint64 offset, guint length,
GstBuffer ** buffer)
{
GstQueue2 *queue;
GstFlowReturn ret;
queue = GST_QUEUE2_CAST (gst_pad_get_parent (pad));
GST_QUEUE2_MUTEX_LOCK_CHECK (queue, queue->srcresult, out_flushing);
length = (length == -1) ? DEFAULT_BUFFER_SIZE : length;
offset = (offset == -1) ? queue->current->reading_pos : offset;
/* function will block when the range is not yet available */
ret = gst_queue2_create_read (queue, offset, length, buffer);
GST_QUEUE2_MUTEX_UNLOCK (queue);
gst_object_unref (queue);
return ret;
/* ERRORS */
out_flushing:
{
ret = queue->srcresult;
GST_DEBUG_OBJECT (queue, "we are flushing");
GST_QUEUE2_MUTEX_UNLOCK (queue);
return ret;
}
}
static gboolean
gst_queue2_src_checkgetrange_function (GstPad * pad)
{
GstQueue2 *queue;
gboolean ret;
queue = GST_QUEUE2 (gst_pad_get_parent (pad));
/* we can operate in pull mode when we are using a tempfile */
ret = QUEUE_IS_USING_TEMP_FILE (queue);
gst_object_unref (GST_OBJECT (queue));
return ret;
}
/* sink currently only operates in push mode */
static gboolean
gst_queue2_sink_activate_push (GstPad * pad, gboolean active)
{
gboolean result = TRUE;
GstQueue2 *queue;
queue = GST_QUEUE2 (gst_pad_get_parent (pad));
if (active) {
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "activating push mode");
queue->srcresult = GST_FLOW_OK;
queue->sinkresult = GST_FLOW_OK;
queue->is_eos = FALSE;
queue->unexpected = FALSE;
reset_rate_timer (queue);
GST_QUEUE2_MUTEX_UNLOCK (queue);
} else {
/* unblock chain function */
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "deactivating push mode");
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
gst_queue2_locked_flush (queue);
GST_QUEUE2_MUTEX_UNLOCK (queue);
}
gst_object_unref (queue);
return result;
}
/* src operating in push mode, we start a task on the source pad that pushes out
* buffers from the queue */
static gboolean
gst_queue2_src_activate_push (GstPad * pad, gboolean active)
{
gboolean result = FALSE;
GstQueue2 *queue;
queue = GST_QUEUE2 (gst_pad_get_parent (pad));
if (active) {
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "activating push mode");
queue->srcresult = GST_FLOW_OK;
queue->sinkresult = GST_FLOW_OK;
queue->is_eos = FALSE;
queue->unexpected = FALSE;
result = gst_pad_start_task (pad, (GstTaskFunction) gst_queue2_loop, pad);
GST_QUEUE2_MUTEX_UNLOCK (queue);
} else {
/* unblock loop function */
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "deactivating push mode");
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
/* the item add signal will unblock */
GST_QUEUE2_SIGNAL_ADD (queue);
GST_QUEUE2_MUTEX_UNLOCK (queue);
/* step 2, make sure streaming finishes */
result = gst_pad_stop_task (pad);
}
gst_object_unref (queue);
return result;
}
/* pull mode, downstream will call our getrange function */
static gboolean
gst_queue2_src_activate_pull (GstPad * pad, gboolean active)
{
gboolean result;
GstQueue2 *queue;
queue = GST_QUEUE2 (gst_pad_get_parent (pad));
if (active) {
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
/* open the temp file now */
result = gst_queue2_open_temp_location_file (queue);
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "activating pull mode");
queue->srcresult = GST_FLOW_OK;
queue->sinkresult = GST_FLOW_OK;
queue->is_eos = FALSE;
queue->unexpected = FALSE;
GST_QUEUE2_MUTEX_UNLOCK (queue);
} else {
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "no temp file, cannot activate pull mode");
/* this is not allowed, we cannot operate in pull mode without a temp
* file. */
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
result = FALSE;
GST_QUEUE2_MUTEX_UNLOCK (queue);
}
} else {
GST_QUEUE2_MUTEX_LOCK (queue);
GST_DEBUG_OBJECT (queue, "deactivating pull mode");
queue->srcresult = GST_FLOW_WRONG_STATE;
queue->sinkresult = GST_FLOW_WRONG_STATE;
/* this will unlock getrange */
GST_QUEUE2_SIGNAL_ADD (queue);
result = TRUE;
GST_QUEUE2_MUTEX_UNLOCK (queue);
}
gst_object_unref (queue);
return result;
}
static GstStateChangeReturn
gst_queue2_change_state (GstElement * element, GstStateChange transition)
{
GstQueue2 *queue;
GstStateChangeReturn ret = GST_STATE_CHANGE_SUCCESS;
queue = GST_QUEUE2 (element);
switch (transition) {
case GST_STATE_CHANGE_NULL_TO_READY:
break;
case GST_STATE_CHANGE_READY_TO_PAUSED:
if (QUEUE_IS_USING_TEMP_FILE (queue)) {
if (!gst_queue2_open_temp_location_file (queue))
ret = GST_STATE_CHANGE_FAILURE;
}
queue->segment_event_received = FALSE;
queue->starting_segment = NULL;
break;
case GST_STATE_CHANGE_PAUSED_TO_PLAYING:
break;
default:
break;
}
if (ret == GST_STATE_CHANGE_FAILURE)
return ret;
ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition);
if (ret == GST_STATE_CHANGE_FAILURE)
return ret;
switch (transition) {
case GST_STATE_CHANGE_PLAYING_TO_PAUSED:
break;
case GST_STATE_CHANGE_PAUSED_TO_READY:
if (QUEUE_IS_USING_TEMP_FILE (queue))
gst_queue2_close_temp_location_file (queue);
if (queue->starting_segment != NULL) {
gst_event_unref (queue->starting_segment);
queue->starting_segment = NULL;
}
break;
case GST_STATE_CHANGE_READY_TO_NULL:
break;
default:
break;
}
return ret;
}
/* changing the capacity of the queue must wake up
* the _chain function, it might have more room now
* to store the buffer/event in the queue */
#define QUEUE_CAPACITY_CHANGE(q)\
GST_QUEUE2_SIGNAL_DEL (queue);
/* Changing the minimum required fill level must
* wake up the _loop function as it might now
* be able to preceed.
*/
#define QUEUE_THRESHOLD_CHANGE(q)\
GST_QUEUE2_SIGNAL_ADD (queue);
static void
gst_queue2_set_temp_template (GstQueue2 * queue, const gchar * template)
{
GstState state;
/* the element must be stopped in order to do this */
GST_OBJECT_LOCK (queue);
state = GST_STATE (queue);
if (state != GST_STATE_READY && state != GST_STATE_NULL)
goto wrong_state;
GST_OBJECT_UNLOCK (queue);
/* set new location */
g_free (queue->temp_template);
queue->temp_template = g_strdup (template);
return;
/* ERROR */
wrong_state:
{
GST_WARNING_OBJECT (queue, "setting temp-template property in wrong state");
GST_OBJECT_UNLOCK (queue);
}
}
static void
gst_queue2_set_property (GObject * object,
guint prop_id, const GValue * value, GParamSpec * pspec)
{
GstQueue2 *queue = GST_QUEUE2 (object);
/* someone could change levels here, and since this
* affects the get/put funcs, we need to lock for safety. */
GST_QUEUE2_MUTEX_LOCK (queue);
switch (prop_id) {
case PROP_MAX_SIZE_BYTES:
queue->max_level.bytes = g_value_get_uint (value);
QUEUE_CAPACITY_CHANGE (queue);
break;
case PROP_MAX_SIZE_BUFFERS:
queue->max_level.buffers = g_value_get_uint (value);
QUEUE_CAPACITY_CHANGE (queue);
break;
case PROP_MAX_SIZE_TIME:
queue->max_level.time = g_value_get_uint64 (value);
/* set rate_time to the same value. We use an extra field in the level
* structure so that we can easily access and compare it */
queue->max_level.rate_time = queue->max_level.time;
QUEUE_CAPACITY_CHANGE (queue);
break;
case PROP_USE_BUFFERING:
queue->use_buffering = g_value_get_boolean (value);
break;
case PROP_USE_RATE_ESTIMATE:
queue->use_rate_estimate = g_value_get_boolean (value);
break;
case PROP_LOW_PERCENT:
queue->low_percent = g_value_get_int (value);
break;
case PROP_HIGH_PERCENT:
queue->high_percent = g_value_get_int (value);
break;
case PROP_TEMP_TEMPLATE:
gst_queue2_set_temp_template (queue, g_value_get_string (value));
break;
case PROP_TEMP_LOCATION:
g_free (queue->temp_location);
queue->temp_location = g_value_dup_string (value);
/* you can set the property back to NULL to make it use the temp-tmpl
* property. */
queue->temp_location_set = queue->temp_location != NULL;
break;
case PROP_TEMP_REMOVE:
queue->temp_remove = g_value_get_boolean (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
GST_QUEUE2_MUTEX_UNLOCK (queue);
}
static void
gst_queue2_get_property (GObject * object,
guint prop_id, GValue * value, GParamSpec * pspec)
{
GstQueue2 *queue = GST_QUEUE2 (object);
GST_QUEUE2_MUTEX_LOCK (queue);
switch (prop_id) {
case PROP_CUR_LEVEL_BYTES:
g_value_set_uint (value, queue->cur_level.bytes);
break;
case PROP_CUR_LEVEL_BUFFERS:
g_value_set_uint (value, queue->cur_level.buffers);
break;
case PROP_CUR_LEVEL_TIME:
g_value_set_uint64 (value, queue->cur_level.time);
break;
case PROP_MAX_SIZE_BYTES:
g_value_set_uint (value, queue->max_level.bytes);
break;
case PROP_MAX_SIZE_BUFFERS:
g_value_set_uint (value, queue->max_level.buffers);
break;
case PROP_MAX_SIZE_TIME:
g_value_set_uint64 (value, queue->max_level.time);
break;
case PROP_USE_BUFFERING:
g_value_set_boolean (value, queue->use_buffering);
break;
case PROP_USE_RATE_ESTIMATE:
g_value_set_boolean (value, queue->use_rate_estimate);
break;
case PROP_LOW_PERCENT:
g_value_set_int (value, queue->low_percent);
break;
case PROP_HIGH_PERCENT:
g_value_set_int (value, queue->high_percent);
break;
case PROP_TEMP_TEMPLATE:
g_value_set_string (value, queue->temp_template);
break;
case PROP_TEMP_LOCATION:
g_value_set_string (value, queue->temp_location);
break;
case PROP_TEMP_REMOVE:
g_value_set_boolean (value, queue->temp_remove);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
GST_QUEUE2_MUTEX_UNLOCK (queue);
}