/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- load_immediate
- emit_single_op
- emit_const
- sljit_set_jump_addr
- sljit_set_const
/*
* Stack-less Just-In-Time compiler
*
* Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification, are
* permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
static sljit_si load_immediate(struct sljit_compiler *compiler, sljit_si dst, sljit_sw imm)
{
if (imm <= SIMM_MAX && imm >= SIMM_MIN)
return push_inst(compiler, OR | D(dst) | S1(0) | IMM(imm), DR(dst));
FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((imm >> 10) & 0x3fffff), DR(dst)));
return (imm & 0x3ff) ? push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (imm & 0x3ff), DR(dst)) : SLJIT_SUCCESS;
}
#define ARG2(flags, src2) ((flags & SRC2_IMM) ? IMM(src2) : S2(src2))
static SLJIT_INLINE sljit_si emit_single_op(struct sljit_compiler *compiler, sljit_si op, sljit_si flags,
sljit_si dst, sljit_si src1, sljit_sw src2)
{
SLJIT_COMPILE_ASSERT(ICC_IS_SET == SET_FLAGS, icc_is_set_and_set_flags_must_be_the_same);
switch (op) {
case SLJIT_MOV:
case SLJIT_MOV_UI:
case SLJIT_MOV_SI:
case SLJIT_MOV_P:
SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
if (dst != src2)
return push_inst(compiler, OR | D(dst) | S1(0) | S2(src2), DR(dst));
return SLJIT_SUCCESS;
case SLJIT_MOV_UB:
case SLJIT_MOV_SB:
SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
if (op == SLJIT_MOV_UB)
return push_inst(compiler, AND | D(dst) | S1(src2) | IMM(0xff), DR(dst));
FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(24), DR(dst)));
return push_inst(compiler, SRA | D(dst) | S1(dst) | IMM(24), DR(dst));
}
else if (dst != src2)
SLJIT_ASSERT_STOP();
return SLJIT_SUCCESS;
case SLJIT_MOV_UH:
case SLJIT_MOV_SH:
SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
if ((flags & (REG_DEST | REG2_SOURCE)) == (REG_DEST | REG2_SOURCE)) {
FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src2) | IMM(16), DR(dst)));
return push_inst(compiler, (op == SLJIT_MOV_SH ? SRA : SRL) | D(dst) | S1(dst) | IMM(16), DR(dst));
}
else if (dst != src2)
SLJIT_ASSERT_STOP();
return SLJIT_SUCCESS;
case SLJIT_NOT:
SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
return push_inst(compiler, XNOR | (flags & SET_FLAGS) | D(dst) | S1(0) | S2(src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_CLZ:
SLJIT_ASSERT(src1 == TMP_REG1 && !(flags & SRC2_IMM));
/* sparc 32 does not support SLJIT_KEEP_FLAGS. Not sure I can fix this. */
FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(src2) | S2(0), SET_FLAGS));
FAIL_IF(push_inst(compiler, OR | D(TMP_REG1) | S1(0) | S2(src2), DR(TMP_REG1)));
FAIL_IF(push_inst(compiler, BICC | DA(0x1) | (7 & DISP_MASK), UNMOVABLE_INS));
FAIL_IF(push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(0) | IMM(32), UNMOVABLE_INS | (flags & SET_FLAGS)));
FAIL_IF(push_inst(compiler, OR | D(dst) | S1(0) | IMM(-1), DR(dst)));
/* Loop. */
FAIL_IF(push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(0), SET_FLAGS));
FAIL_IF(push_inst(compiler, SLL | D(TMP_REG1) | S1(TMP_REG1) | IMM(1), DR(TMP_REG1)));
FAIL_IF(push_inst(compiler, BICC | DA(0xe) | (-2 & DISP_MASK), UNMOVABLE_INS));
return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(dst) | IMM(1), UNMOVABLE_INS | (flags & SET_FLAGS));
case SLJIT_ADD:
return push_inst(compiler, ADD | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_ADDC:
return push_inst(compiler, ADDC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_SUB:
return push_inst(compiler, SUB | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_SUBC:
return push_inst(compiler, SUBC | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_MUL:
FAIL_IF(push_inst(compiler, SMUL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
if (!(flags & SET_FLAGS))
return SLJIT_SUCCESS;
FAIL_IF(push_inst(compiler, SRA | D(TMP_REG1) | S1(dst) | IMM(31), DR(TMP_REG1)));
FAIL_IF(push_inst(compiler, RDY | D(TMP_LINK), DR(TMP_LINK)));
return push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(TMP_REG1) | S2(TMP_LINK), MOVABLE_INS | SET_FLAGS);
case SLJIT_AND:
return push_inst(compiler, AND | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_OR:
return push_inst(compiler, OR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_XOR:
return push_inst(compiler, XOR | (flags & SET_FLAGS) | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst) | (flags & SET_FLAGS));
case SLJIT_SHL:
FAIL_IF(push_inst(compiler, SLL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
case SLJIT_LSHR:
FAIL_IF(push_inst(compiler, SRL | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
case SLJIT_ASHR:
FAIL_IF(push_inst(compiler, SRA | D(dst) | S1(src1) | ARG2(flags, src2), DR(dst)));
return !(flags & SET_FLAGS) ? SLJIT_SUCCESS : push_inst(compiler, SUB | SET_FLAGS | D(0) | S1(dst) | S2(0), SET_FLAGS);
}
SLJIT_ASSERT_STOP();
return SLJIT_SUCCESS;
}
static SLJIT_INLINE sljit_si emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw init_value)
{
FAIL_IF(push_inst(compiler, SETHI | D(dst) | ((init_value >> 10) & 0x3fffff), DR(dst)));
return push_inst(compiler, OR | D(dst) | S1(dst) | IMM_ARG | (init_value & 0x3ff), DR(dst));
}
SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr)
{
sljit_ins *inst = (sljit_ins*)addr;
inst[0] = (inst[0] & 0xffc00000) | ((new_addr >> 10) & 0x3fffff);
inst[1] = (inst[1] & 0xfffffc00) | (new_addr & 0x3ff);
SLJIT_CACHE_FLUSH(inst, inst + 2);
}
SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant)
{
sljit_ins *inst = (sljit_ins*)addr;
inst[0] = (inst[0] & 0xffc00000) | ((new_constant >> 10) & 0x3fffff);
inst[1] = (inst[1] & 0xfffffc00) | (new_constant & 0x3ff);
SLJIT_CACHE_FLUSH(inst, inst + 2);
}