root/modules/cudaimgproc/src/canny.cpp

/* [<][>][^][v][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. createCannyEdgeDetector
  2. L2gradient_
  3. setLowThreshold
  4. getLowThreshold
  5. setHighThreshold
  6. getHighThreshold
  7. setAppertureSize
  8. getAppertureSize
  9. setL2Gradient
  10. getL2Gradient
  11. write
  12. read
  13. detect
  14. detect
  15. createBuf
  16. CannyCaller
  17. createCannyEdgeDetector

/*M///////////////////////////////////////////////////////////////////////////////////////
//
//  IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
//  By downloading, copying, installing or using the software you agree to this license.
//  If you do not agree to this license, do not download, install,
//  copy or use the software.
//
//
//                           License Agreement
//                For Open Source Computer Vision Library
//
// Copyright (C) 2000-2008, Intel Corporation, all rights reserved.
// Copyright (C) 2009, Willow Garage Inc., all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
//   * Redistribution's of source code must retain the above copyright notice,
//     this list of conditions and the following disclaimer.
//
//   * Redistribution's in binary form must reproduce the above copyright notice,
//     this list of conditions and the following disclaimer in the documentation
//     and/or other materials provided with the distribution.
//
//   * The name of the copyright holders may not be used to endorse or promote products
//     derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/

#include "precomp.hpp"

using namespace cv;
using namespace cv::cuda;

#if !defined (HAVE_CUDA) || defined (CUDA_DISABLER)

Ptr<CannyEdgeDetector> cv::cuda::createCannyEdgeDetector(double, double, int, bool) { throw_no_cuda(); return Ptr<CannyEdgeDetector>(); }

#else /* !defined (HAVE_CUDA) */

namespace canny
{
    void calcMagnitude(PtrStepSzb srcWhole, int xoff, int yoff, PtrStepSzi dx, PtrStepSzi dy, PtrStepSzf mag, bool L2Grad, cudaStream_t stream);
    void calcMagnitude(PtrStepSzi dx, PtrStepSzi dy, PtrStepSzf mag, bool L2Grad, cudaStream_t stream);

    void calcMap(PtrStepSzi dx, PtrStepSzi dy, PtrStepSzf mag, PtrStepSzi map, float low_thresh, float high_thresh, cudaStream_t stream);

    void edgesHysteresisLocal(PtrStepSzi map, short2* st1, cudaStream_t stream);

    void edgesHysteresisGlobal(PtrStepSzi map, short2* st1, short2* st2, cudaStream_t stream);

    void getEdges(PtrStepSzi map, PtrStepSzb dst, cudaStream_t stream);
}

namespace
{
    class CannyImpl : public CannyEdgeDetector
    {
    public:
        CannyImpl(double low_thresh, double high_thresh, int apperture_size, bool L2gradient) :
            low_thresh_(low_thresh), high_thresh_(high_thresh), apperture_size_(apperture_size), L2gradient_(L2gradient)
        {
            old_apperture_size_ = -1;
        }

        void detect(InputArray image, OutputArray edges, Stream& stream);
        void detect(InputArray dx, InputArray dy, OutputArray edges, Stream& stream);

        void setLowThreshold(double low_thresh) { low_thresh_ = low_thresh; }
        double getLowThreshold() const { return low_thresh_; }

        void setHighThreshold(double high_thresh) { high_thresh_ = high_thresh; }
        double getHighThreshold() const { return high_thresh_; }

        void setAppertureSize(int apperture_size) { apperture_size_ = apperture_size; }
        int getAppertureSize() const { return apperture_size_; }

        void setL2Gradient(bool L2gradient) { L2gradient_ = L2gradient; }
        bool getL2Gradient() const { return L2gradient_; }

        void write(FileStorage& fs) const
        {
            fs << "name" << "Canny_CUDA"
            << "low_thresh" << low_thresh_
            << "high_thresh" << high_thresh_
            << "apperture_size" << apperture_size_
            << "L2gradient" << L2gradient_;
        }

        void read(const FileNode& fn)
        {
            CV_Assert( String(fn["name"]) == "Canny_CUDA" );
            low_thresh_ = (double)fn["low_thresh"];
            high_thresh_ = (double)fn["high_thresh"];
            apperture_size_ = (int)fn["apperture_size"];
            L2gradient_ = (int)fn["L2gradient"] != 0;
        }

    private:
        void createBuf(Size image_size);
        void CannyCaller(GpuMat& edges, Stream& stream);

        double low_thresh_;
        double high_thresh_;
        int apperture_size_;
        bool L2gradient_;

        GpuMat dx_, dy_;
        GpuMat mag_;
        GpuMat map_;
        GpuMat st1_, st2_;
#ifdef HAVE_OPENCV_CUDAFILTERS
        Ptr<Filter> filterDX_, filterDY_;
#endif
        int old_apperture_size_;
    };

    void CannyImpl::detect(InputArray _image, OutputArray _edges, Stream& stream)
    {
        GpuMat image = _image.getGpuMat();

        CV_Assert( image.type() == CV_8UC1 );
        CV_Assert( deviceSupports(SHARED_ATOMICS) );

        if (low_thresh_ > high_thresh_)
            std::swap(low_thresh_, high_thresh_);

        createBuf(image.size());

        _edges.create(image.size(), CV_8UC1);
        GpuMat edges = _edges.getGpuMat();

        if (apperture_size_ == 3)
        {
            Size wholeSize;
            Point ofs;
            image.locateROI(wholeSize, ofs);
            GpuMat srcWhole(wholeSize, image.type(), image.datastart, image.step);

            canny::calcMagnitude(srcWhole, ofs.x, ofs.y, dx_, dy_, mag_, L2gradient_, StreamAccessor::getStream(stream));
        }
        else
        {
#ifndef HAVE_OPENCV_CUDAFILTERS
            throw_no_cuda();
#else
            filterDX_->apply(image, dx_, stream);
            filterDY_->apply(image, dy_, stream);

            canny::calcMagnitude(dx_, dy_, mag_, L2gradient_, StreamAccessor::getStream(stream));
#endif
        }

        CannyCaller(edges, stream);
    }

    void CannyImpl::detect(InputArray _dx, InputArray _dy, OutputArray _edges, Stream& stream)
    {
        GpuMat dx = _dx.getGpuMat();
        GpuMat dy = _dy.getGpuMat();

        CV_Assert( dx.type() == CV_32SC1 );
        CV_Assert( dy.type() == dx.type() && dy.size() == dx.size() );
        CV_Assert( deviceSupports(SHARED_ATOMICS) );

        dx.copyTo(dx_, stream);
        dy.copyTo(dy_, stream);

        if (low_thresh_ > high_thresh_)
            std::swap(low_thresh_, high_thresh_);

        createBuf(dx.size());

        _edges.create(dx.size(), CV_8UC1);
        GpuMat edges = _edges.getGpuMat();

        canny::calcMagnitude(dx_, dy_, mag_, L2gradient_, StreamAccessor::getStream(stream));

        CannyCaller(edges, stream);
    }

    void CannyImpl::createBuf(Size image_size)
    {
        CV_Assert(image_size.width < std::numeric_limits<short>::max() && image_size.height < std::numeric_limits<short>::max());

        ensureSizeIsEnough(image_size, CV_32SC1, dx_);
        ensureSizeIsEnough(image_size, CV_32SC1, dy_);

#ifdef HAVE_OPENCV_CUDAFILTERS
        if (apperture_size_ != 3 && apperture_size_ != old_apperture_size_)
        {
            filterDX_ = cuda::createDerivFilter(CV_8UC1, CV_32S, 1, 0, apperture_size_, false, 1, BORDER_REPLICATE);
            filterDY_ = cuda::createDerivFilter(CV_8UC1, CV_32S, 0, 1, apperture_size_, false, 1, BORDER_REPLICATE);
            old_apperture_size_ = apperture_size_;
        }
#endif

        ensureSizeIsEnough(image_size, CV_32FC1, mag_);
        ensureSizeIsEnough(image_size, CV_32SC1, map_);

        ensureSizeIsEnough(1, image_size.area(), CV_16SC2, st1_);
        ensureSizeIsEnough(1, image_size.area(), CV_16SC2, st2_);
    }

    void CannyImpl::CannyCaller(GpuMat& edges, Stream& stream)
    {
        map_.setTo(Scalar::all(0));
        canny::calcMap(dx_, dy_, mag_, map_, static_cast<float>(low_thresh_), static_cast<float>(high_thresh_), StreamAccessor::getStream(stream));

        canny::edgesHysteresisLocal(map_, st1_.ptr<short2>(), StreamAccessor::getStream(stream));

        canny::edgesHysteresisGlobal(map_, st1_.ptr<short2>(), st2_.ptr<short2>(), StreamAccessor::getStream(stream));

        canny::getEdges(map_, edges, StreamAccessor::getStream(stream));
    }
}

Ptr<CannyEdgeDetector> cv::cuda::createCannyEdgeDetector(double low_thresh, double high_thresh, int apperture_size, bool L2gradient)
{
    return makePtr<CannyImpl>(low_thresh, high_thresh, apperture_size, L2gradient);
}

#endif /* !defined (HAVE_CUDA) */

/* [<][>][^][v][top][bottom][index][help] */