root/mojo/system/message_pipe_dispatcher_unittest.cc

DEFINITIONS

1. TEST
2. TEST
3. TEST
4. TEST
5. bytes_written_
6. Run
7. bytes_read_
8. Run
9. IsValidMessage
10. TEST

// Copyright 2013 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

// NOTE(vtl): Some of these tests are inherently flaky (e.g., if run on a
// heavily-loaded system). Sorry. |kEpsilonMicros| may be increased to increase
// tolerance and reduce observed flakiness.

#include "mojo/system/message_pipe_dispatcher.h"

#include <string.h>

#include <limits>

#include "base/memory/ref_counted.h"
#include "base/memory/scoped_vector.h"
#include "base/rand_util.h"
#include "base/threading/platform_thread.h"  // For |Sleep()|.
#include "base/threading/simple_thread.h"
#include "base/time/time.h"
#include "mojo/system/message_pipe.h"
#include "mojo/system/test_utils.h"
#include "mojo/system/waiter.h"
#include "mojo/system/waiter_test_utils.h"
#include "testing/gtest/include/gtest/gtest.h"

namespace mojo {
namespace system {
namespace {

const int64_t kMicrosPerMs = 1000;
const int64_t kEpsilonMicros = 30 * kMicrosPerMs;  // 30 ms.

TEST(MessagePipeDispatcherTest, Basic) {
  test::Stopwatch stopwatch;
  int32_t buffer[1];
  const uint32_t kBufferSize = static_cast<uint32_t>(sizeof(buffer));
  uint32_t buffer_size;
  int64_t elapsed_micros;

  // Run this test both with |d0| as port 0, |d1| as port 1 and vice versa.
  for (unsigned i = 0; i < 2; i++) {
    scoped_refptr<MessagePipeDispatcher> d0(new MessagePipeDispatcher());
    scoped_refptr<MessagePipeDispatcher> d1(new MessagePipeDispatcher());
    {
      scoped_refptr<MessagePipe> mp(new MessagePipe());
      d0->Init(mp, i);  // 0, 1.
      d1->Init(mp, i ^ 1);  // 1, 0.
    }
    Waiter w;

    // Try adding a writable waiter when already writable.
    w.Init();
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_WRITABLE, 0));
    // Shouldn't need to remove the waiter (it was not added).

    // Add a readable waiter to |d0|, then make it readable (by writing to
    // |d1|), then wait.
    w.Init();
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 1));
    buffer[0] = 123456789;
    EXPECT_EQ(MOJO_RESULT_OK,
              d1->WriteMessage(buffer, kBufferSize,
                               NULL,
                               MOJO_WRITE_MESSAGE_FLAG_NONE));
    stopwatch.Start();
    EXPECT_EQ(1, w.Wait(MOJO_DEADLINE_INDEFINITE));
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_LT(elapsed_micros, kEpsilonMicros);
    d0->RemoveWaiter(&w);

    // Try adding a readable waiter when already readable (from above).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 2));
    // Shouldn't need to remove the waiter (it was not added).

    // Make |d0| no longer readable (by reading from it).
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));
    EXPECT_EQ(kBufferSize, buffer_size);
    EXPECT_EQ(123456789, buffer[0]);

    // Wait for zero time for readability on |d0| (will time out).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 3));
    stopwatch.Start();
    EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, w.Wait(0));
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_LT(elapsed_micros, kEpsilonMicros);
    d0->RemoveWaiter(&w);

    // Wait for non-zero, finite time for readability on |d0| (will time out).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 3));
    stopwatch.Start();
    EXPECT_EQ(MOJO_RESULT_DEADLINE_EXCEEDED, w.Wait(2 * kEpsilonMicros));
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_GT(elapsed_micros, (2-1) * kEpsilonMicros);
    EXPECT_LT(elapsed_micros, (2+1) * kEpsilonMicros);
    d0->RemoveWaiter(&w);

    EXPECT_EQ(MOJO_RESULT_OK, d0->Close());
    EXPECT_EQ(MOJO_RESULT_OK, d1->Close());
  }
}

TEST(MessagePipeDispatcherTest, InvalidParams) {
  char buffer[1];

  scoped_refptr<MessagePipeDispatcher> d0(new MessagePipeDispatcher());
  scoped_refptr<MessagePipeDispatcher> d1(new MessagePipeDispatcher());
  {
    scoped_refptr<MessagePipe> mp(new MessagePipe());
    d0->Init(mp, 0);
    d1->Init(mp, 1);
  }

  // |WriteMessage|:
  // Null buffer with nonzero buffer size.
  EXPECT_EQ(MOJO_RESULT_INVALID_ARGUMENT,
            d0->WriteMessage(NULL, 1,
                             NULL,
                             MOJO_WRITE_MESSAGE_FLAG_NONE));
  // Huge buffer size.
  EXPECT_EQ(MOJO_RESULT_RESOURCE_EXHAUSTED,
            d0->WriteMessage(buffer, std::numeric_limits<uint32_t>::max(),
                             NULL,
                             MOJO_WRITE_MESSAGE_FLAG_NONE));

  // |ReadMessage|:
  // Null buffer with nonzero buffer size.
  uint32_t buffer_size = 1;
  EXPECT_EQ(MOJO_RESULT_INVALID_ARGUMENT,
            d0->ReadMessage(NULL, &buffer_size,
                            0, NULL,
                            MOJO_READ_MESSAGE_FLAG_NONE));

  EXPECT_EQ(MOJO_RESULT_OK, d0->Close());
  EXPECT_EQ(MOJO_RESULT_OK, d1->Close());
}

// Test what happens when one end is closed (single-threaded test).
TEST(MessagePipeDispatcherTest, BasicClosed) {
  int32_t buffer[1];
  const uint32_t kBufferSize = static_cast<uint32_t>(sizeof(buffer));
  uint32_t buffer_size;

  // Run this test both with |d0| as port 0, |d1| as port 1 and vice versa.
  for (unsigned i = 0; i < 2; i++) {
    scoped_refptr<MessagePipeDispatcher> d0(new MessagePipeDispatcher());
    scoped_refptr<MessagePipeDispatcher> d1(new MessagePipeDispatcher());
    {
      scoped_refptr<MessagePipe> mp(new MessagePipe());
      d0->Init(mp, i);  // 0, 1.
      d1->Init(mp, i ^ 1);  // 1, 0.
    }
    Waiter w;

    // Write (twice) to |d1|.
    buffer[0] = 123456789;
    EXPECT_EQ(MOJO_RESULT_OK,
              d1->WriteMessage(buffer, kBufferSize,
                               NULL,
                               MOJO_WRITE_MESSAGE_FLAG_NONE));
    buffer[0] = 234567890;
    EXPECT_EQ(MOJO_RESULT_OK,
              d1->WriteMessage(buffer, kBufferSize,
                               NULL,
                               MOJO_WRITE_MESSAGE_FLAG_NONE));

    // Try waiting for readable on |d0|; should fail (already satisfied).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 0));

    // Try reading from |d1|; should fail (nothing to read).
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_SHOULD_WAIT,
              d1->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));

    // Close |d1|.
    EXPECT_EQ(MOJO_RESULT_OK, d1->Close());

    // Try waiting for readable on |d0|; should fail (already satisfied).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 1));

    // Read from |d0|.
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));
    EXPECT_EQ(kBufferSize, buffer_size);
    EXPECT_EQ(123456789, buffer[0]);

    // Try waiting for readable on |d0|; should fail (already satisfied).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 2));

    // Read again from |d0|.
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_OK,
              d0->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));
    EXPECT_EQ(kBufferSize, buffer_size);
    EXPECT_EQ(234567890, buffer[0]);

    // Try waiting for readable on |d0|; should fail (unsatisfiable).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 3));

    // Try waiting for writable on |d0|; should fail (unsatisfiable).
    w.Init();
    EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
              d0->AddWaiter(&w, MOJO_WAIT_FLAG_WRITABLE, 4));

    // Try reading from |d0|; should fail (nothing to read and other end
    // closed).
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
              d0->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));

    // Try writing to |d0|; should fail (other end closed).
    buffer[0] = 345678901;
    EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION,
              d0->WriteMessage(buffer, kBufferSize,
                               NULL,
                               MOJO_WRITE_MESSAGE_FLAG_NONE));

    EXPECT_EQ(MOJO_RESULT_OK, d0->Close());
  }
}

TEST(MessagePipeDispatcherTest, BasicThreaded) {
  test::Stopwatch stopwatch;
  int32_t buffer[1];
  const uint32_t kBufferSize = static_cast<uint32_t>(sizeof(buffer));
  uint32_t buffer_size;
  bool did_wait;
  MojoResult result;
  int64_t elapsed_micros;

  // Run this test both with |d0| as port 0, |d1| as port 1 and vice versa.
  for (unsigned i = 0; i < 2; i++) {
    scoped_refptr<MessagePipeDispatcher> d0(new MessagePipeDispatcher());
    scoped_refptr<MessagePipeDispatcher> d1(new MessagePipeDispatcher());
    {
      scoped_refptr<MessagePipe> mp(new MessagePipe());
      d0->Init(mp, i);  // 0, 1.
      d1->Init(mp, i ^ 1);  // 1, 0.
    }

    // Wait for readable on |d1|, which will become readable after some time.
    {
      test::WaiterThread thread(d1,
                               MOJO_WAIT_FLAG_READABLE,
                               MOJO_DEADLINE_INDEFINITE,
                               0,
                               &did_wait, &result);
      stopwatch.Start();
      thread.Start();
      base::PlatformThread::Sleep(
          base::TimeDelta::FromMicroseconds(2 * kEpsilonMicros));
      // Wake it up by writing to |d0|.
      buffer[0] = 123456789;
      EXPECT_EQ(MOJO_RESULT_OK,
                d0->WriteMessage(buffer, kBufferSize,
                                 NULL,
                                 MOJO_WRITE_MESSAGE_FLAG_NONE));
    }  // Joins the thread.
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_TRUE(did_wait);
    EXPECT_EQ(0, result);
    EXPECT_GT(elapsed_micros, (2-1) * kEpsilonMicros);
    EXPECT_LT(elapsed_micros, (2+1) * kEpsilonMicros);

    // Now |d1| is already readable. Try waiting for it again.
    {
      test::WaiterThread thread(d1,
                                MOJO_WAIT_FLAG_READABLE,
                                MOJO_DEADLINE_INDEFINITE,
                                1,
                                &did_wait, &result);
      stopwatch.Start();
      thread.Start();
    }  // Joins the thread.
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_FALSE(did_wait);
    EXPECT_EQ(MOJO_RESULT_ALREADY_EXISTS, result);
    EXPECT_LT(elapsed_micros, kEpsilonMicros);

    // Consume what we wrote to |d0|.
    buffer[0] = 0;
    buffer_size = kBufferSize;
    EXPECT_EQ(MOJO_RESULT_OK,
              d1->ReadMessage(buffer, &buffer_size,
                              0, NULL,
                              MOJO_READ_MESSAGE_FLAG_NONE));
    EXPECT_EQ(kBufferSize, buffer_size);
    EXPECT_EQ(123456789, buffer[0]);

    // Wait for readable on |d1| and close |d0| after some time, which should
    // cancel that wait.
    {
      test::WaiterThread thread(d1,
                                MOJO_WAIT_FLAG_READABLE,
                                MOJO_DEADLINE_INDEFINITE,
                                0,
                                &did_wait, &result);
      stopwatch.Start();
      thread.Start();
      base::PlatformThread::Sleep(
          base::TimeDelta::FromMicroseconds(2 * kEpsilonMicros));
      EXPECT_EQ(MOJO_RESULT_OK, d0->Close());
    }  // Joins the thread.
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_TRUE(did_wait);
    EXPECT_EQ(MOJO_RESULT_FAILED_PRECONDITION, result);
    EXPECT_GT(elapsed_micros, (2-1) * kEpsilonMicros);
    EXPECT_LT(elapsed_micros, (2+1) * kEpsilonMicros);

    EXPECT_EQ(MOJO_RESULT_OK, d1->Close());
  }

  for (unsigned i = 0; i < 2; i++) {
    scoped_refptr<MessagePipeDispatcher> d0(new MessagePipeDispatcher());
    scoped_refptr<MessagePipeDispatcher> d1(new MessagePipeDispatcher());
    {
      scoped_refptr<MessagePipe> mp(new MessagePipe());
      d0->Init(mp, i);  // 0, 1.
      d1->Init(mp, i ^ 1);  // 1, 0.
    }

    // Wait for readable on |d1| and close |d1| after some time, which should
    // cancel that wait.
    {
      test::WaiterThread thread(d1,
                                MOJO_WAIT_FLAG_READABLE,
                                MOJO_DEADLINE_INDEFINITE,
                                0,
                                &did_wait, &result);
      stopwatch.Start();
      thread.Start();
      base::PlatformThread::Sleep(
          base::TimeDelta::FromMicroseconds(2 * kEpsilonMicros));
      EXPECT_EQ(MOJO_RESULT_OK, d1->Close());
    }  // Joins the thread.
    elapsed_micros = stopwatch.Elapsed();
    EXPECT_TRUE(did_wait);
    EXPECT_EQ(MOJO_RESULT_CANCELLED, result);
    EXPECT_GT(elapsed_micros, (2-1) * kEpsilonMicros);
    EXPECT_LT(elapsed_micros, (2+1) * kEpsilonMicros);

    EXPECT_EQ(MOJO_RESULT_OK, d0->Close());
  }
}

// Stress test -----------------------------------------------------------------

const size_t kMaxMessageSize = 2000;

class WriterThread : public base::SimpleThread {
 public:
  // |*messages_written| and |*bytes_written| belong to the thread while it's
  // alive.
  WriterThread(scoped_refptr<Dispatcher> write_dispatcher,
               size_t* messages_written, size_t* bytes_written)
      : base::SimpleThread("writer_thread"),
        write_dispatcher_(write_dispatcher),
        messages_written_(messages_written),
        bytes_written_(bytes_written) {
    *messages_written_ = 0;
    *bytes_written_ = 0;
  }

  virtual ~WriterThread() {
    Join();
  }

 private:
  virtual void Run() OVERRIDE {
    // Make some data to write.
    unsigned char buffer[kMaxMessageSize];
    for (size_t i = 0; i < kMaxMessageSize; i++)
      buffer[i] = static_cast<unsigned char>(i);

    // Number of messages to write.
    *messages_written_ = static_cast<size_t>(base::RandInt(1000, 6000));

    // Write messages.
    for (size_t i = 0; i < *messages_written_; i++) {
      uint32_t bytes_to_write = static_cast<uint32_t>(
          base::RandInt(1, static_cast<int>(kMaxMessageSize)));
      EXPECT_EQ(MOJO_RESULT_OK,
                write_dispatcher_->WriteMessage(buffer, bytes_to_write,
                                                NULL,
                                                MOJO_WRITE_MESSAGE_FLAG_NONE));
      *bytes_written_ += bytes_to_write;
    }

    // Write one last "quit" message.
    EXPECT_EQ(MOJO_RESULT_OK,
              write_dispatcher_->WriteMessage("quit", 4,
                                              NULL,
                                              MOJO_WRITE_MESSAGE_FLAG_NONE));
  }

  const scoped_refptr<Dispatcher> write_dispatcher_;
  size_t* const messages_written_;
  size_t* const bytes_written_;

  DISALLOW_COPY_AND_ASSIGN(WriterThread);
};

class ReaderThread : public base::SimpleThread {
 public:
  // |*messages_read| and |*bytes_read| belong to the thread while it's alive.
  ReaderThread(scoped_refptr<Dispatcher> read_dispatcher,
               size_t* messages_read, size_t* bytes_read)
      : base::SimpleThread("reader_thread"),
        read_dispatcher_(read_dispatcher),
        messages_read_(messages_read),
        bytes_read_(bytes_read) {
    *messages_read_ = 0;
    *bytes_read_ = 0;
  }

  virtual ~ReaderThread() {
    Join();
  }

 private:
  virtual void Run() OVERRIDE {
    unsigned char buffer[kMaxMessageSize];
    MojoResult result;
    Waiter w;

    // Read messages.
    for (;;) {
      // Wait for it to be readable.
      w.Init();
      result = read_dispatcher_->AddWaiter(&w, MOJO_WAIT_FLAG_READABLE, 0);
      EXPECT_TRUE(result == MOJO_RESULT_OK ||
                  result == MOJO_RESULT_ALREADY_EXISTS) << "result: " << result;
      if (result == MOJO_RESULT_OK) {
        // Actually need to wait.
        EXPECT_EQ(0, w.Wait(MOJO_DEADLINE_INDEFINITE));
        read_dispatcher_->RemoveWaiter(&w);
      }

      // Now, try to do the read.
      // Clear the buffer so that we can check the result.
      memset(buffer, 0, sizeof(buffer));
      uint32_t buffer_size = static_cast<uint32_t>(sizeof(buffer));
      result = read_dispatcher_->ReadMessage(buffer, &buffer_size,
                                             0, NULL,
                                             MOJO_READ_MESSAGE_FLAG_NONE);
      EXPECT_TRUE(result == MOJO_RESULT_OK ||
                  result == MOJO_RESULT_SHOULD_WAIT) << "result: " << result;
      // We're racing with others to read, so maybe we failed.
      if (result == MOJO_RESULT_SHOULD_WAIT)
        continue;  // In which case, try again.
      // Check for quit.
      if (buffer_size == 4 && memcmp("quit", buffer, 4) == 0)
        return;
      EXPECT_GE(buffer_size, 1u);
      EXPECT_LE(buffer_size, kMaxMessageSize);
      EXPECT_TRUE(IsValidMessage(buffer, buffer_size));

      (*messages_read_)++;
      *bytes_read_ += buffer_size;
    }
  }

  static bool IsValidMessage(const unsigned char* buffer,
                             uint32_t message_size) {
    size_t i;
    for (i = 0; i < message_size; i++) {
      if (buffer[i] != static_cast<unsigned char>(i))
        return false;
    }
    // Check that the remaining bytes weren't stomped on.
    for (; i < kMaxMessageSize; i++) {
      if (buffer[i] != 0)
        return false;
    }
    return true;
  }

  const scoped_refptr<Dispatcher> read_dispatcher_;
  size_t* const messages_read_;
  size_t* const bytes_read_;

  DISALLOW_COPY_AND_ASSIGN(ReaderThread);
};

TEST(MessagePipeDispatcherTest, Stress) {
  static const size_t kNumWriters = 30;
  static const size_t kNumReaders = kNumWriters;

  scoped_refptr<MessagePipeDispatcher> d_write(new MessagePipeDispatcher());
  scoped_refptr<MessagePipeDispatcher> d_read(new MessagePipeDispatcher());
  {
    scoped_refptr<MessagePipe> mp(new MessagePipe());
    d_write->Init(mp, 0);
    d_read->Init(mp, 1);
  }

  size_t messages_written[kNumWriters];
  size_t bytes_written[kNumWriters];
  size_t messages_read[kNumReaders];
  size_t bytes_read[kNumReaders];
  {
    // Make writers.
    ScopedVector<WriterThread> writers;
    for (size_t i = 0; i < kNumWriters; i++) {
      writers.push_back(
          new WriterThread(d_write, &messages_written[i], &bytes_written[i]));
    }

    // Make readers.
    ScopedVector<ReaderThread> readers;
    for (size_t i = 0; i < kNumReaders; i++) {
      readers.push_back(
          new ReaderThread(d_read, &messages_read[i], &bytes_read[i]));
    }

    // Start writers.
    for (size_t i = 0; i < kNumWriters; i++)
      writers[i]->Start();

    // Start readers.
    for (size_t i = 0; i < kNumReaders; i++)
      readers[i]->Start();

    // TODO(vtl): Maybe I should have an event that triggers all the threads to
    // start doing stuff for real (so that the first ones created/started aren't
    // advantaged).
  }  // Joins all the threads.

  size_t total_messages_written = 0;
  size_t total_bytes_written = 0;
  for (size_t i = 0; i < kNumWriters; i++) {
    total_messages_written += messages_written[i];
    total_bytes_written += bytes_written[i];
  }
  size_t total_messages_read = 0;
  size_t total_bytes_read = 0;
  for (size_t i = 0; i < kNumReaders; i++) {
    total_messages_read += messages_read[i];
    total_bytes_read += bytes_read[i];
    // We'd have to be really unlucky to have read no messages on a thread.
    EXPECT_GT(messages_read[i], 0u) << "reader: " << i;
    EXPECT_GE(bytes_read[i], messages_read[i]) << "reader: " << i;
  }
  EXPECT_EQ(total_messages_written, total_messages_read);
  EXPECT_EQ(total_bytes_written, total_bytes_read);

  EXPECT_EQ(MOJO_RESULT_OK, d_write->Close());
  EXPECT_EQ(MOJO_RESULT_OK, d_read->Close());
}

}  // namespace
}  // namespace system
}  // namespace mojo